Availability
Showing In Stock Items. Show All 72 Items.
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 42 )
$44.99
—
$52.99
The Stop Shop offers complete brake line sets for a wide range of vehicles—including models from Chevy, Buick, Pontiac, and Oldsmobile. These pre-bent copper, steel or stainless steel sets are exact reproductions of your stock originals, with the correct size fittings and spring guard in all the places it came from the factory. You'll receive all brake lines needed throughout the entire vehicle; this means from the master cylinder down to any blocks, out to the two front wheels, the long line that runs to the rear-end, and the two over the rear axle. Order the set recommended for your application.
( 34 )
$118.99
—
$148.99
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$749.95
—
$849.95
Maintain proper braking with Dorman power brake booster check valves. They are built to OEM specifications and install easily in seconds. The valves are designed to ensure proper vacuum in power boosters for positive braking.
( 28 )
$4.99
—
$10.99
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$52.99
—
$66.99
Dorman offers a broad spectrum of parts for automotive repair and maintenance, including brake hose locks. These brake hydraulic hose lock clips are constructed from quality material for lasting durability against harsh road and weather conditions. They are designed for use in effectively securing brake hose to the vehicle. Drive with confidence with Dorman brake hardware components.
( 13 )
$6.99
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 441 )
$14.99
—
$32.99
Are you tired of having leaks in your transmission lines? The Right Stuff transmission cooler lines are manufactured from quality materials to ensure performance and dependability.
( 347 )
$60.99
Vintage Air offers SureFit reduced barrier modified hose kits that are designed for use with a complete Gen IV or Gen 5 SureFit system in vehicles without a stock engine compartment configuration and core support. The kits contains refrigerant hoses with pre-crimped reduced barrier beadlock fittings on one end, with the other end open to accommodate a custom installation. All necessary fittings, O-rings and mounting hardware are also included, along with detailed installation and crimping instructions.
( 2 )
$194.99
Russell street legal brake line kits will improve your braking performance for competition or everyday driving. Replacing spongy or brittle factory rubber brake lines with Russell hoses will reduce hose expansion for firmer, more responsive braking. These kits feature stainless steel braised hose with zinc-plated fittings—and are factory assembled for convenient bolt-on installation. The components meet strict DOT requirements for street-driven vehicles. Russell brake line kits are available for a wide range of specific domestic, import, truck, and SUV applications.
( 486 )
$70.95
Make your stops shorter with new flex brake lines from The Right Stuff. Their flex lines are quality-made hoses featuring single-crimp/swage fittings. They come available in several front and rear applications, so choose the lines that will get the job done right the first time--flex brake hoses from The Right Stuff.
( 111 )
$22.99
—
$46.99
Russell speed bleeders let you bleed the brake lines on just about any vehicle all by yourself. Just replace the old bleeder screws with speed bleeders. They have an internal check valve that will pump excess air and fluid out for you. A special coating on the speed bleeders' threads keep them from admitting air into the system, and keep expelled air and fluid out. When you're done, just tighten the screws and go on to the next brake cylinder.
( 259 )
$15.95
Are you replacing your brake lines? The Right Stuff has you covered--even on the little things, like brake line clips. If you're in the process of restoring your classic ride, these high-quality steel clips will keep your lines in place. Get the stuff you need to complete your brake job with The Right Stuff brake line clips.
( 30 )
$4.99
Dorman offers a line of brake banjo bolts in a range of thread sizes and lengths for various applications. All of their brake hydraulic hose to caliper bolts are constructed from high-quality materials for long-lasting durability. They're conveniently packaged in a variety of piece counts to assist with both small and large projects. Order the Dorman brake banjo bolts designed to fit your application.
( 29 )
$4.99
The Stop Shop offers CNC-bent front brake lines that are exact factory replacements on specific vehicles, which uses the original proportioning valve and bracket. Simply remove all original rusty lines and put the new tubes in place. The brake lines are available in 304 stainless and Galfan coated steel tubing. Tube nuts are made from steel, plated for corrosion resistance; and the fittings and tube size will match factory tubes. Spring guards to protect the tubing will be in factory positions (if stock tubes had spring guards). Order the front brake lines recommended for your vehicle.
( 6 )
$54.99
—
$64.99
The Right Stuff offers you the best-fitting, most exact reproduction brake lines on the market. They utilize state-of-the-art CNC benders and automated end-forming machines to double-flare lines with remarkable consistency. The Right Stuff brake line sets are available in OEM steel or stainless steel, front or rear, and provide you with more responsive, reliable brakes for the security of an assured stop. All brake line kits feature steel fittings. Over a thousand applications are inventoried--so no matter what you're driving, there should be no problem finding The Right Stuff replacement brake lines!
( 661 )
$33.99
—
$46.99
Radiator hoses can be the Achilles heel of your ride if they aren't serviced and replaced when signs of weakness or wear start to appear. Summit Racing™ radiator hose kits keep the engine-cooling arteries between your powerplant and the radiator secure and functional. They will help keep your vehicle running at optimal temps for many miles to come. Their colored design and application-engineered fit will give your vehicle a custom-plumbed look. Kits are available for various makes and models, so find the best fit for your application and restore your cooling system to peak performance.
( 8 )
$175.99
Continental heater hose E-Z coils make creating your very own molded hoses a breeze. These E-Z coils maintain a consistent I.D. through a 90 degree bend, eliminating the need for a custom-molded hose. When it comes to saving time and money, Continental has you covered with their E-Z coils.
( 5 )
$12.99
Continental heater hoses are original equipment molded heater hoses for popular applications. The tube in Continental's universal or pre-curved molded heater hoses is made with Versigard rubber--a compound that's highly resistant to heat, oil, and weather. The patented knit reinforcement is made with Tylanar fabric--a material that meets or exceeds the requirements of SAE J20R3, D1. Additional features include: * Designed for those vehicles requiring multiple or severe bends * Original configurations to ensure a perfect fit * Fits popular applications * Rugged construction
( 26 )
$23.99
—
$42.99
RESTOPARTS® Supplied brake hose sets are manufactured to high-quality standards and are available in various styles. These kits have been designed for specific applications as terrific replacements for OE rubber hoses.
Not Yet Reviewed
$158.99
These Dorman radiator drain petcocks are designed to empty the coolant from your OEM radiator. They are made of quality materials to ensure reliability and fit. Dorman radiator drain petcocks come in different thread sizes and styles to fit your specific radiator application.
( 29 )
$4.99
These Global West Suspension brake line kits are made from durable braided stainless steel hose and are produced for many popular musclecars. Kits are available for both stock and aftermarket caliper combinations.
( 13 )
$81.94
RESTOPARTS® Supplied overflow radiator hoses are original-style replacements for your classic. Featuring authentic factory markings, the thin-wall black rubber hoses have a 3/8 in. inside diameter and are ready for installation in your engine compartment. They're designed for over a thousand applications from the 1950s and up.
( 4 )
$24.99
These Standard Motor Products ported vacuum switches are designed to open and close the vacuum signal path with changes in coolant temperature. These switches can be used to control vacuum-activated components on your ride.
( 12 )
$26.99
—
$40.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
