Availability
Moroso Perm-Align valve cover gaskets are manufactured from 30-durometer rubber, which is molded over and vulcanized to a rigid steel frame. They won't leak, blow out, or get sucked in, the way stock or inferior-quality aftermarket gaskets can. These gaskets feature superior-quality rubber and steel, which outlast cork-and-rubber composite designs to provide years of dependable service, especially if you frequently have to remove and reinstall the valve covers.
( 194 )
$52.99
—
$85.99
Moroso oil pan gaskets offers race-quality, reinforced, and available for many popular engine applications. So, if you're tired of your car marking its territory in your garage or driveway, give one of these Moroso oil pan gaskets a try!
( 140 )
$53.99
—
$85.99
The new standard in ignition wires for racers on a budget! Moroso Ultra 40 unsleeved custom-fit ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection. Features: * Kevlar® core that's four times stronger than Aramid cores * Class-leading 40 ohms of resistance per foot * Nickel copper alloy conductors for superior spark energy transfer * Extra-thick EPDM layer for greater dielectric strength * High-temperature silicone boots that can withstand heat up to 600 degrees * Locking stainless steel plug terminals
( 136 )
$86.90
—
$112.99
Moroso extended oil pump pickups are engineered to be "where the oil is" under the most demanding racing conditions. Designed for use with Moroso oil pans and constructed of steel, they are precision-bent and heliarc welded. A wire mesh steel screen, which is welded to the pickup box, traps debris without restricting oil flow.
( 130 )
$60.99
—
$110.99
Moroso harmonic balancer tools use a pilot stud, which keeps the harmonic balancer perpendicular to the crankshaft's centerline, for a bind-free installation. Using a thrust bearing and protective washer, the drive nut can rotate freely, allowing the balancer to be pressed on easily.
( 95 )
$66.99
Moroso offers manifold filler necks in a variety of styles, materials, and finishes—for applications from 1955 and up. These replacements locate the filler at the highest point to bleed off air on cars with low-mount radiators. The filler necks can be located on either the left or right side of the vehicle. They include 1/2 in. NPT fittings for the installation of a water temperature sending unit, and two 1/4 in. NPT fittings for return lines on popular aftermarket cylinder heads.
( 20 )
$57.99
—
$93.99
Moroso vacuum pump mounting brackets are a great way to eliminate the difficulties of vacuum pump installation. Designed to fit Moroso original or enhanced design vacuum pumps, they come available for a variety of engines and mounting locations.
( 3 )
$79.33
These mounts are made for racing. Moroso solid steel motor mounts replace stock, OEM-style rubber mounts to prevent torque loss and binding linkages, a common result of excessive engine movement. These solid steel mounts eliminate the need for bulky torque straps and chains and are covered with a protective zinc coating.
( 133 )
$51.99
—
$77.99
These oil pan bolts are made from Grade 8 steel. They have an integral serrated washer face, which gives them a self-locking effect.
( 35 )
$52.99
Moroso distributor hold-down clamps are extra-thick and heavy duty to ensure adequate retention of distributor housing, and are stud-mounted to eliminate thread wear in the intake manifold. They are slotted for quick distributor removal and include a stud, washer, and nut.
( 25 )
$99.99
These stamped steel valve covers from Moroso are available in your choice of short or tall designs with a variety of breather locations. They are designed to fit everything from stock to Circle Track-oriented configurations. They're manufactured from high-quality steel with either a durable zinc plated finish or a 3-step chroming process, which guarantees the highest and longest-lasting shine possible. Most applications include two breather/filler cap grommets and one PCV grommet. Circle Track and other racing versions feature welded-on breather tubes in a variety of locations, with most including breathers.
( 38 )
$81.99
—
$109.99
Moroso Blue Max Spiral Core custom-fit wire sets have a special strategically-wound 304 stainless steel conductor and Kevlar core that reduces the ohms of resistance per foot, while delivering more spark energy, better EMI suppression, and a higher dielectric strength. A tough synthetic silicone jacket resists high temperatures and oils, and the extra-thick EPDM layer adds greater electrical insulation. Compact silicone plug boots provide extra header clearance and feature fold-over crimped terminals for a secure connection.
( 49 )
$91.99
—
$110.99
True racing parts from Moroso! Oil filter aluminum bypass plates replace the engine-mounted oil filter in wet sump oiling systems and direct the oil to a remote oil filter or oil cooler. They're drilled and tapped for -10 AN O-ring inlet and outlet fittings, and include all mounting hardware, gaskets, and an O-ring.
( 3 )
$96.99
Moroso Brodix SR20/Dart Pro-1 valve covers gaskets will help to protect cylinder head hardware from the elements and prevent oil from escaping the engine. These engine components are sold in pairs and are made of thick silicone-coated paper with a steel core. They are specifically designed to fit Big Block Chevy engines with Brodix SR20 or Dart Pro 1 20-degree heads.
Not Yet Reviewed
$71.99
The nation's top engine builders rely on Moroso racing oil pumps because of their superior design and ability to provide consistent oil flow. They're designed to handle the extra demand required from higher engine speeds. Special anti-cavitation slots, feeder grooves, and an enlarged bypass area are machined into the housing to bleed oil back to the inlet side of the pump. They feature proprietary cast housings fitted with precision-machined gears and a precision-ground shaft for outstanding oil delivery. Each pump is 100 percent pressure-tested to stringent quality control specifications to ensure that the pump you receive will perform flawlessly.
( 8 )
$95.99
—
$100.99
Moroso billet aluminum filler necks allow you to install a variety of bolt-on style filler necks or block-off plates, offering cooling system flexibility for both race and street applications. The base locates the filler neck at the highest point, to bleed off air on cars with low-mount radiators. They include a machined port for installing a water temperature sending unit, and two ports to plumb return lines on popular aftermarket heads. And, to give you versatile mounting options--these filler necks can be flipped 180 degrees for either a left or right water hose outlet location.
( 9 )
$50.99
—
$97.99
Moroso fuel pump block-off plates are designed to block-off the fuel pump mounting boss when a mechanical fuel pump is not being used. These plates are made of anodized blue aluminum or high-luster triple chrome plated steel.
( 60 )
$56.99
Moroso louvered windage trays are designed to allow oil thrown from the rotating assembly to drain into the sump, without splashing back and creating power-robbing drag. Made from heavy-gauge steel, they are PTFE coated for quick drainage.
( 26 )
$53.99
—
$99.99
These Moroso water neck bleeder kits allow you to remove air pockets from your cooling system. They include a filler neck housing with a 90 degree outlet for the upper radiator hose, an aluminum bleeder plate with a petcock valve, two mounting gaskets, and mounting hardware. The Moroso water neck bleeder kits can also be used with Moroso's expansion tanks for maximum cooling performance.
( 4 )
$79.99
These Moroso Mag-Tune spark plug wires are fully tested to ensure secure termination, electrical conductivity, and dielectric strength. They feature moisture-resistant 100 percent silicone boots and snap-lock spark plug terminals. The Moroso Mag-Tune spark plug wires start with a conductive latex-coated, heavy-duty fiberglass core and then add a spiral-wound stainless nickel alloy conductor over the top. Added to that is a fiberglass reinforcing braid, and they finish the construction with a high-temperature EPDM jacketing.
( 125 )
$50.79
—
$61.99
Moroso degree wheel crankshaft sockets easily turn over your engine and degree-in the camshaft. These sockets have a 1/2 in. drive and make it easier to locate TDC and BDC. They feature a knurled jam nut that is used to position a degree wheel, and can be loosened and turned separately from the socket. A broached keyway allows the socket to slide over the crankshaft snout for positive engagement.
( 8 )
$96.99
—
$97.99
Moroso cast aluminum crankshaft pulleys have a small diameter that slows fan, water pump, and alternator speeds to reduce horsepower-robbing drag. They also have extra-deep grooves to provide added belt retention during rapid changes in engine rpm. They are precision-machined from high-grade, lightweight, aluminum castings.
( 17 )
$82.99
—
$89.99
Designed to shield your intake manifold from hot oil splash to maintain a cooler intake charge for more power, Moroso Lifter Valley oil baffles also help keep excess oil out of your valve covers and maintain oil pressure in the event of pushrod or rocker arm failure by keeping the lifters in their bores. Due to slight variations in blocks, the baffle may need slight trimming before they will "snap" into place.
( 3 )
$54.99
Moroso water pump spacer kits convert Chevrolet short water pumps to the later long-style pump design. They include gaskets, special heat-treated bolts, and spacers.
( 3 )
$61.99
—
$62.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
