Availability
Showing In Stock Items. Show All 32 Items.
Edelbrock Performer intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer aluminum intake manifold, an intake gasket set, intake manifold bolts, a carburetor stud kit—and an Edelbrock Performer Series 600 cfm electric choke; a Thunder AVS 650 cfm electric choke; or a Thunder AVS 800 cfm electric choke (depending on your engine C.I.D.). The EnduraShine bright silver chrome finish is optional and resists discoloration from heat; it features a top clearcoat to enhance abrasion and chemical resistance. Edelbrock Performer intakes are designed to deliver improved throttle response over stock intakes. Are you ready for a change? Edelbrock Performer intake manifold and carburetor kits are available for small block and big block muscle car, hot rod, truck, and street vehicle applications.
( 34 )
$971.95
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 161 )
$1,022.50
—
$1,087.50
Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 83 )
$825.00
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 46 )
$995.00
Richmond Gear Pro Gear ring and pinion sets take it a step further. The gear sets are designed for race use only where hard launches and severe heat cycling occurs. They're made from a softer, more malleable 9310 steel alloy to be more resistant to breakage under harsh racing conditions. These gears feature an outstanding rotating weight loss of up to 6 pounds, ground pinion threads for trouble-free installation, and a special heat treatment for improved strength.
( 42 )
$751.99
—
$907.99
Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM Air-Gap aluminum intake manifold that is available in a variety of finishes, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The Edelbrock Performer RPM Air-Gap intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try these Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 2 )
$1,149.95
Eaton Detroit lockers are designed to maximize traction by delivering 100 percent of the torque and power to both drive wheels. They are engineered to keep both wheels in a constant drive mode and have the ability to automatically allow wheel speed differentiation when required.
( 80 )
$884.99
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 80 )
$823.95
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,087.50
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$769.99
McLeod Street Twin clutch kits are designed to be high performance replacements for your OEM clutch. They include everything you need--a new disc, pressure plate, and your choice of a billet steel or billet aluminum flywheel. McLeod Street Twin clutch kits are pre-balanced to fit specific applications and include the correct alignment tool for installation.
( 4 )
$1,095.00
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$999.95
Powertrax Grip Pro traction systems are the latest design in differential technology. They combine the smooth operation of a limited-slip differential, with the strength of a fully machined, forged steel case. Using 3x2 spiral gear engineering, the Powertrax Grip Pro delivers progressive and variable traction. Based on throttle input, you are in control of how much traction is applied. These differential systems are great for use where finesse is just as important as brutal traction. On the road or track, in the rain or snow, Grip Pro is a winner! The systems come fully assembled and there are no friction plates—so you can use any gear oil you like, including full synthetic and racing lube.
( 21 )
$781.99
If you are looking for the ultimate in traction, the Powertrax Grip Lok traction system can handle the torque of engines producing up to 550 hp. It combines the fully automatic locking action of the Powertrax traditional locker, with the strength of a fully machined case. Using automatic locking technology, the Powertrax Grip Lok traction system delivers automatic mechanically actuated traction. This system is the ultimate in competition for street, strip, and off-road capabilities.
( 1 )
$768.99
Yukon Gear & Axle differential housing spreader tools are built to work on the Dana 30, 44, 60, 61, 70, and 80 differentials. They are designed to allow you to safely and easily set carrier bearing preload, saving time and money. The tools are made from quality materials and feature full adjustability for simple installation and use.
Not Yet Reviewed
$756.99
Spartan lockers are affordable, reliable traction. These USA Standard Gear Spartan lockers are mechanical lockers that fit into a standard differential carrier, replacing the open spider gears. They do not use thrust washers and have a revolutionary spring and pin design to make installation a snap! Spartan lockers feature high-nickel 9310 chromoly drivers and couplers for added strength. Give your vehicle great traction and save some cash. Drop in Spartan lockers for improved traction. They're available for a variety of makes and models spanning more than a half-century.
( 31 )
$760.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
