Availability
Showing In Stock Items. Show All 14 Items.
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 139 )
$334.95
—
$534.95
On Sale
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 8-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including sport compacts and models from AMC, Chrysler, Dodge, GM, and Ford. Competition Engineering 8-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 8-Point Roll Bar Main Hoop Kit, which includes the main roll bar hoop * 8-Point Roll Bar Strut Kit, which includes a main hoop crossbrace, two front door bars, two rear struts, two diagonal hoop supports, six weld joint gussets, and eight 6 in. by 6 in. by 1/8 in. thick steel mounting plates * Complete instructions for a hassle-free installation
( 37 )
$379.98
$341.98
On Sale
Competition Engineering 10-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including models from GM, Chrysler, Dodge, and Ford. Competition Engineering 10-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 10-Point Roll Bar Main Hoop Kit, which includes the main hoop, top hoop, main hoop crossbrace, two diagonal hoop supports, and two front downstruts * 10-Point Roll Bar Strut Kit, which includes two rear struts, two door bars, weld joint gussets, and steel mounting pads (6 in. by 6 in. by 1/8 in thick) * Complete instructions for a hassle-free installation
( 21 )
$488.98
$440.08
On Sale
Wrap yourself up in 10 points of protection, these Competition Engineering 10-Point roll bar main hoop kits give you that extra protection required when you truly get competitive and head out to the circuit races. These 10-point roll bar main hoop kits come with the main loop, one top loop, two front down struts, one main hoop crossbrace, and two diagonal hoop supports. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding definitely. Working with the interior out also makes it much easier to get proper fitment, and assure proper welds are achieved. These main hoop kits will require the appropriate strut kits to complete the cage install. These main hoop kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 14 )
$316.99
—
$318.99
$285.29
—
$287.09
Rhodes Race Cars roll cage conversion kits are designed to convert your existing roll bar into a 10, 12 or even 14-point roll cage. RRC conversion kits meet or exceed the NHRA and IHRA requirement for roll cage tubing. These kits include roof tubes, windshield post runners, and dash crossmember. Conversion kits may be available in any of the following materials: * 1-5/8 in. x .134 in. wall mild steel tubing * 1-5/8 in. x .120 in. wall DOM tubing * 1-5/8 in. x .083 in. wall 4130 chromoly tubing Note, because of differing driver sizes and main hoop locations, these kits are not notched!
( 6 )
$294.95
—
$414.95
On Sale
Drag racers want their cars to be as safe as possible, and Competition Engineering 12-point roll bar main hoop kits offer superior strength and chassis rigidity for 360 degree driver protection. This design links the cage to the front frame, essentially making it one solid unit--you'll notice better control and vehicle reaction time. These packages furnish you with the main hoop, one top hoop, two front downstruts, one main hoop crossbrace, and two forward struts. This type of modification is required on most racing circuits for increased cabin safety and side impact security. The units require only minor modifications and welding for solid installation; they're tailored for specific types of cars, so check the applications for matching specs. Competition Engineering 12-pt roll bar main hoop kits require also ordering the appropriate strut kit if you desire a complete roll cage install. Both kits are available in mild steel and chromoly.
Not Yet Reviewed
$358.99
—
$363.99
$323.09
—
$327.59
Allstar Performance offers main hoop assemblies for your standard or deluxe roll cage kits. Solidly built and reasonably priced, these high-quality steel assemblies are your foundation to protection. Allstar knows that your roll cage is serious equipment. When you need to replace it, make the right choice with Allstar main hoop assemblies.
( 4 )
$259.99
On Sale
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$408.99
$368.09
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
