Availability
Showing In Stock Items. Show All 27 Items.
Clearance
RAM Concept 9.5 dual disc clutch/billet flywheel kits are the perfect entry level dual disc clutch systems. Each kit features an increased clamp load pressure plate, 9.5 in. premium-faced organic or metallic clutch discs, and a RAM surface-ground and balanced billet steel flywheel. The pressure plate provides a silky-smooth clutch pedal feel, while the dual disc provides additional holding capacity when compared to single disc systems. RAM Concept 9.5 units also utilize a sprung hub top disc that helps dampen and quiet the initial clutch engagement, plus a strap driven floater plate eliminates any floater plate rattle concerns. They make excellent choices for LS/LT and Coyote engine swaps, as well as Tremec transmission swaps. So, for an outstanding driving experience, choose a RAM Concept 9.5 clutch kit with flywheel designed for your vehicle's needs. Features and benefits: * A higher clamp-load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform--no flimsy stamped steel mounting provisions * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration-free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Available with either: -- 300 Series organic friction material for applications up to about 650 hp -- 900 Series metallic friction material for use up to about 800 hp
Not Yet Reviewed
$1,480.00
$1,299.50
Clearance
These Flaming River Mustang power rack and pinions are perfect for street rods, musclecars, and as stock replacements in Ford products that use the Mustang II front steer design. They offer over 6 in. of rack travel, which provides the maximum turning radius for classic and street rod applications. Inside, the pinion gear set is improved over the OE factory design and is engineered to provide ultimate strength characteristics. Outside, they are significantly different from previous designs. The Flaming River Mustang II power rack and pinions use a billet aluminum spool valve housing with a heat sink design for lower operating temperatures. They also feature a longer rack piston tube for added strength and increased rack stability. Their low-profile pressure hose design reduces most installation obstacles. They are light, yet strong, weighing 12 lbs. less than the original stock cast racks. Available with a matched, speed-sensitive power steering pump with V-belt or serpentine pulleys, the Flaming River Mustang II power rack and pinions make an excellent steering choice for your ride.
( 10 )
$1,139.99
$887.50
Clearance
Flaming River manual rack and pinions are built from lightweight aluminum castings—and feature chrome plated center tubes and two mounting holes. Designed to meet the standards of professional street rod and race car chassis builders, they weigh less than 15 lbs. each. These rack and pinions are a great way to streamline the engine compartment while maintaining smooth, responsive steering.
( 54 )
$858.99
$606.50
Clearance
ACL direct replacement main bearing sets include their Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. ACL Aluglide bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds. Affordable, high-quality engine bearings expertly made from premium materials and engineered to match your exact requirements, ACL main bearing sets. Select the set designed for your engine.
( 1 )
$24.99
$12.50
Clearance
MustangSteve offers many automotive parts and accessories, including brake caliper mounting brackets and kits for retrofit onto your classic Ford Mustang to help you restore, modify, or repair your vehicle. These caliper mounting brackets are designed to keep your brake calipers in the correct position for your aftermarket brake kit. The mounting brackets are precision crafted from high-quality steel and are available for both front and rear axle model applications. Find just the parts you need to upgrade your Ford Mustang from MustangSteve—and drive your dream! Select the brake caliper mounting brackets recommended for your brake kit application.
Not Yet Reviewed
$298.99
$209.50
Clearance
Delphi control arm bushings are designed, engineered, and manufactured to OE-quality standards. With safety and cost-effectiveness in mind, they use only the highest quality materials, balancing precise quantities of steel and rubber for optimum strength, flexibility, and noise reduction tailored to the application they are to fit. Through a rigorous cleaning process, a strong chemical bonding, and extensive fatigue testing, Delphi control arm bushings will supply your vehicle with a comfortable, quiet ride, as well as improved stability and safety.
Not Yet Reviewed
$9.99
$7.50
Clearance
Sunsong offers replacement brake hoses for thousands of vehicles from the 1940s and up. Nearly all are assembled with various hose end attachment options. These rubber brake lines are available in countless lengths for dozens of positions on your vehicle. Order the configuration recommended for your application.
( 28 )
$23.99
$20.50
Clearance
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 139 )
$29.99
—
$179.99
$19.50
—
$119.50
Clearance
ANCO 14-Series wiper blades are conventional replacements equipped with a natural rubber element, providing streak-free wipes. Their all-metal structure offers dependable durability, and the vented symmetrical bridge prevents wind lift. They are available in sizes from 11 to 28 in. and with either a 9mm x 3mm J-hook connection or a 7mm bayonet connection, depending on application. Get the right blade at the right price with the ANCO 14-Series wiper blades designed to fit your windshield.
( 7 )
$6.99
$2.50
Clearance
Classic Tube fuel return lines are a great way to replace the stock hoses on your vehicle. These accurately bent lines are manufactured to OE specifications in steel, stainless steel, and aluminum for improved looks under the hood, a perfect fit and exceptional corrosion resistance. Lines come pre-installed with all the necessary fittings and flares to provide an easy and direct installation. Order the fuel line model for your application.
( 6 )
$106.99
$75.50
Clearance
Get the chill factor for better engine performance with Four Seasons electric fan kits. These drop-in replacements have original equipment quality and connectors for a perfect fit that you do yourself, saving yourself time and money. These fans are made of durable, heavy-duty plastic to provide quiet operation and dependable service. Keep your engine cool to perform as it should with Four Seasons electric fan kits.
( 19 )
$110.99
$69.50
Clearance
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 101 )
$66.99
$40.50
Clearance
These TRICO NeoForm wiper blades give you the original factory quality that you can depend on, with the value-added performance of a PTFE surface protector for a smoother wipe and longer life. They feature a memory-curved steel beam that provides uniform pressure for the clearest possible wipe and a dual point coupler that helps to eliminate streaking. TRICO NeoForm wiper blades offer extreme-weather durability for everything from sunlight and rain to snow and mud.
Not Yet Reviewed
$15.99
$6.50
Clearance
Dorman spindle nut washers are coated for high corrosion resistance and a long service life. Depending on the application, they are also available in kits that include the nut, washer, and retainer. Features include: * Direct replacement for a proper fit every time * Conveniently available in packs of different quantities * Durable steel construction * Designed and constructed to strict engineering quality standards
( 4 )
$10.99
$6.50
Clearance
Agility Auto Parts offers a complete line of fuel tank sending units covering a wide variety of North American vehicles. These sending units are engineered to meet or exceed all OEM specifications. They're corrosion-resistant, leak-resistant, and made of durable materials for long-lasting use. Agility Auto Parts fuel tank sending units are available in a range of sizes and attachment styles. Order the model recommended for your applications.
( 2 )
$101.99
$65.50
Clearance
The Right Stuff offers you the best-fitting, most exact reproduction brake lines on the market. They utilize state-of-the-art CNC benders and automated end-forming machines to double-flare lines with remarkable consistency. The Right Stuff brake line sets are available in OEM steel or stainless steel, front or rear, and provide you with more responsive, reliable brakes for the security of an assured stop. All brake line kits feature steel fittings. Over a thousand applications are inventoried--so no matter what you're driving, there should be no problem finding The Right Stuff replacement brake lines!
( 668 )
$52.99
$25.50
Clearance
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 118 )
$63.99
$41.50
Clearance
OER Authorized air conditioning compressors are available for a wide range of applications. For instance, their universal Sanden SD508/SD5H14 style unit (P/N AC4510C) is universal—and new, not rebuilt. The Sanden/Sankyo 508 is one of the most popular aftermarket compressors available. It robs less horsepower, resulting in improved fuel economy and increased performance. The A/C compressors feature modern rotary internals that reduce noise and vibration. Their compact design is half the weight and bulk of most OE units. Other replacement models are in stock, as well; order the compressor recommended for your vehicle.
( 1 )
$302.99
$218.50
Clearance
Out-Pace Racing Products offers Mustang II spindles for a wide range of 1970s muscle car applications. These forged steel replacements are available for the left and right side of your vehicle.
Not Yet Reviewed
$113.99
$82.50
Clearance
Dorman expansion plugs are conveniently designed aftermarket replacements for stripped plugs. A leak-proof fit and long service life are assured every time, due to high-quality standards and materials used in the manufacturing process. Dorman engine and camshaft expansion plugs are offered in multiple sizes, styles, and materials for precise fitment on countless makes and models. They're easy to install and available individually or in multi-pack sets.
( 75 )
$13.99
$8.50
Clearance
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 38 )
$14.99
$5.50
Clearance
Dorman LED light bulbs are constructed from quality materials to deliver truer color, increased light output, and better visibility. The bulbs feature corrosion-resistant bulb bases and are available for a broad range of applications. Dorman LED bulbs are direct replacements, making your install easier to restore appearance and safety.
( 31 )
$39.99
$22.50
Clearance
Hastings Claimer Series Performance piston ring sets are for builders wanting value without sacrificing precision and performance. They start with top rings made from proprietary shell-mold cast iron with plasma moly impact-resistant alloy, providing a hard, yet lubricating, low-friction structure. The plasma moly coating improves wear resistance, reduces scuffing, traps lubricating oil, and is compatible with a wide range of cylinder bore materials. The 2nd rings are manganese phosphate coated. Claimer moly top rings are torsional positive twist and the 2nd rings are torsional reverse-twist taper face. Completing the set of Moly Claimer Performance rings are Hastings Flex-Vent oil rings that minimize friction, improve flexibility, and provide high-rpm oil control.
( 13 )
$107.99
$87.50
Clearance
Wagner miniature bulbs are manufactured with a continuous coil that resists shock and vibration, extending service life. This design also improves candlepower consistency. In addition, Wagner uses high-temperature gas so that the bulbs are functional in even the hottest-running applications. The incandescent bulbs are available as OEM replacements for dozens of lights throughout your vehicle. Choose the style and color needed for your applications.
( 14 )
$16.99
$6.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
