Availability
1969 FORD THUNDERBIRD Parts and Accessories
Showing In Stock Items. Show All 366 Items.
On Sale
MSD 8.5mm Super Conductor Spark Plug Wire Sets
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1994 )
$143.95
—
$176.95
$129.55
—
$159.25
PerTronix Ignitor® Solid-State Ignition Systems
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1005 )
$112.16
—
$145.85
Tuff Stuff Performance High-Amp Output Factory Cast-Plus Alternators
A Tuff Stuff Performance high-amp output factory cast-plus alternator is just what every ride needs. These units produce the most power at idle to keep your battery fully charged at all times. Tuff Stuff products are hand-built with the best bearings, diodes, and copper windings available; and the cast-plus finish is applied in the company's Cleveland, Ohio factories. This leaves a natural cast look but offers extreme durability from pitting. The alternators are available in a variety of amperages, case and pulley styles for fitment on thousands of specific vehicle applications.
( 735 )
$113.99
—
$163.99
Powermaster Mastertorque Starters
With their gear-reduction drives, heavy-duty PowerMaster Mastertorque starters really crank out the power--180 lb.-ft. of torque. So they can handle engines with compression ratios as high as 14.0:1. If your stock starter clears your oil pan, they will, too. Some will also clear kicked-out pans. A selection of Mastertorque starters can be mounted in multiple orientations, and some will work inverted with the solenoid down. They feature a black wrinkle finish and select models are available in a chrome plated finish.
( 627 )
$193.99
—
$199.99
Summit Racing™ Blueprinted HEI Distributors
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1249 )
$247.99
Summit Racing™ Alternators
Whether you're looking to add amperage to your electrical system, or style to your engine compartment, we've got a Summit Racing™ alternator to help you accomplish your mission. Depend on Summit Racing™ to get the power you need and the space you crave.
( 921 )
$136.99
—
$189.99
U.S. Wheel 510 Series Smoothie Midnight Black Wheels
Ever find yourself wishing someone made a Smoothie-style wheel in midnight black so you didn't have to paint it yourself? Wish granted! U.S. Wheel 510 Series Smoothie midnight black wheels feature all steel construction and a midnight black powdercoated finish. Grab some baby moons or other center hubcaps to pair with these for a knockout nostalgic look. U.S. Wheel 510 Series Smoothie midnight black wheels are available in a variety of sizes and bolt patterns. Order the style recommended for your vehicle.
( 21 )
$124.99
—
$132.99
Powermaster XS Torque Starters
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 910 )
$223.99
—
$225.99
Powermaster Street Alternators
Powermaster street alternators feature all of the quality construction and dependability the company is famous for. The "electrical generators" are available in a variety of amperages and styles, allowing you to choose the best model for your specific ride and the accessories you run. So whether you need an alternator for your truck, hot rod, musclecar, sport compact, or audio competition vehicle, Powermaster gives you the power you need to get it started and keep it going.
( 1821 )
$149.99
—
$244.99
American Racing VN105D Torq-Thrust D Gray Wheels
American Racing Torq-Thrust D wheels are classics. These are the wheels that most people think about when you say "American Racing wheels." They feature their popular 5-spoke design and one-piece alloy construction. The center section has a gray finish and is circled with a satin finish outer rim.
( 292 )
$192.00
—
$223.00
PerTronix Ignitor II® Solid-State Ignition Systems
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 295 )
$183.50
—
$201.55
Lokar Hi-Tech Kickdown Kits
Lokar Hi-Tech kickdown kits are made with an extruded liner for extended life--and are available in either stainless steel braided housing, black stainless steel braided housing, or black housing. They feature matching aluminum fittings and ferrules to help eliminate frayed ends and are adaptable to all types of manifolds, including tunnel ram, blower manifolds, and multiple-carburetor systems. Order the Lokar Hi-Tech kickdown kit designed for your transmission application.
( 467 )
$129.95
Spicer Drivetrain Products Differential Cover Kits
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 101 )
$185.99
Cragar Chrome Smoothie Wheels
These Chrome Smoothie wheels will turn heads at the cruise-in and on the road with their classic good looks. Their smooth, nostalgic style is a perfect choice for your hot rod.
( 214 )
$190.14
—
$209.13
Powermaster PowerMax Starters
With their gear-reduction drives, heavy-duty Powermaster PowerMax starters really crank out the power--180 lb.-ft. of torque. So, they can handle engines with moderate compression ratios. If your stock starter clears your oil pan, the Powermaster PowerMax starters will, too. Some will also clear kicked-out pans. Powermaster PowerMax starters can be mounted in multiple orientations to fit your needs. Starter dyno reports are included.
( 1162 )
$172.99
—
$190.99
American Racing VN501 Gloss Black Machined Wheels
American Racing VN501 gloss black machined wheels feature one-piece cast aluminum construction and a 5-spoke heritage design that's perfect for your muscle car, cruiser, or street rod. The machined spokes and wheel face are offset by black inserts for a classic performance look.
( 64 )
$196.99
Gabriel HiJackers Air Shocks
Gabriel HiJackers air shocks are the original air-adjustable shocks designed to provide customizable performance and support. They can be adjusted and readjusted to maintain proper ride height—and handle any of your temporary towing or hauling needs, including boats and campers. Hijackers feature chrome plated piston rod construction and deluxe wiper seals that provide optimum sealing. Dozens of models are available, covering thousands of applications.
( 617 )
$151.99
Powermaster Retro Alternators
Replace the alternator in your early GM, Ford, or Chrysler, while retaining its original look, with a Powermaster retro alternator. All of the alternators conform to the proper size and appearance of yesterday—while incorporating the technology of today. Plus, they all utilize OEM finishes and wiring hookups for a trouble-free installation. Retro alternators are available in a variety of case and pulley styles, amperage outputs, and wiring capabilities. Order the model designed for use on your vehicle.
( 352 )
$134.99
Summit Racing Equipment® Fast-Five Wheels
Add the race look to your vehicle without the high price. Our high-quality, cast-aluminum one-piece Summit Racing Equipment® Fast-Five wheels include a center cap, 5-spoke star-style design, and are available in multiple bolt patterns to suit your performance needs.
( 54 )
$152.99
—
$176.99
Ford Performance Parts Oil Filter Adapters
Have you ever wondered where you were going to put your oil filter? Doesn't it always seem to be in the way of other accessories? Not anymore with these handy Ford Performance Parts oil filter adapters. They simply screw into the block and rotate the filter toward the front of the engine to provide clearance for engine swaps and chassis modifications. The adapters are available in different models for use with over a thousand applications.
( 21 )
$154.99
Summit Racing™ Venom Black Milled Polished Lip Wheels
Summit Racing™ Venom black milled polished lip wheels add lethal looks to your vehicle. Offered in a long list of sizes, our cast aluminum Venom wheels provide a wide split 5-spoke pattern perfect for allowing everyone to get a good look at your high performance brakes. The spokes have a durable black finish with milled edges surrounded by a gleaming polished lip. Choose the ideal size to fit your vehicle.
( 42 )
$202.99
—
$208.99
Ford Performance Parts High-Volume Oil Pumps
Ford Performance Parts high-volume oil pumps are high-quality, pressure-tested, and hand-turned to deliver more oil than stock pumps. They are offered for most popular Ford V8s. Additional information: * Most are high-volume with standard pressure * Also available for select applications requiring higher volume and pressure * May require bolt-on style pickup (not included) * Some are not recommended for use with stock-capacity oil pans due to their higher pumping capacity * Because of their larger size, some pumps will not fit stock rear sump oil pans * Where applicable, includes a steel backing plate to reduce internal leakage and cavitation erosion
( 46 )
$115.99
Lokar Midnight Series Billet Window Cranks
These Lokar Midnight Series billet window cranks are machined from billet aluminum and come available in beautiful black anodized finish. They feature a full 360 degree fine spline adjustment system, so there are no screws or visible attachment hardware.
( 6 )
$134.95
Proform Street/Strip HEI Distributors
Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.
( 171 )
$181.99
—
$212.99
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster