Availability
Showing In Stock Items. Show All 96 Items.
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 42 )
$38.99
—
$49.99
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 60 )
$13.99
—
$63.99
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 438 )
$19.99
—
$31.99
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$52.99
—
$66.99
Maintain proper braking with Dorman power brake booster check valves. They are built to OEM specifications and install easily in seconds. The valves are designed to ensure proper vacuum in power boosters for positive braking.
( 28 )
$4.99
The Stop Shop PCV valve hoses are the correct molded pieces to restore and repair your classic. They have the proper bends and include hose clamps to provide the fit and function that matches that of the originals they are replacing.
( 2 )
$32.79
RESTOPARTS® Supplied offers a variety of new heater and bypass hoses for your restoration project. These replacement rubber hoses have factory-correct color, shape, and markings, so your muscle car can retain the same look it had when it rolled off the assembly line. Find the hoses recommended for your application, then upgrade your leaking, worn, or period-incorrect lines with quality replacements from RESTOPARTS®.
( 1 )
$34.99
Mishimoto silicone radiator hoses combine factory fit with modern finish and performance. These trimmable hoses are constructed from 5-layer silicone with heat-resistant fibers for strength and longevity. The hoses are available for many vehicle-specific applications, manual and automatic. Finish your project with these high-quality radiator hoses from Mishimoto.
( 18 )
$57.95
—
$82.95
Make your stops shorter with new flex brake lines from The Right Stuff. Their flex lines are quality-made hoses featuring single-crimp/swage fittings. They come available in several front and rear applications, so choose the lines that will get the job done right the first time--flex brake hoses from The Right Stuff.
( 111 )
$16.99
—
$46.99
Russell speed bleeders let you bleed the brake lines on just about any vehicle all by yourself. Just replace the old bleeder screws with speed bleeders. They have an internal check valve that will pump excess air and fluid out for you. A special coating on the speed bleeders' threads keep them from admitting air into the system, and keep expelled air and fluid out. When you're done, just tighten the screws and go on to the next brake cylinder.
( 259 )
$15.95
Are you tired of having leaks in your transmission lines? The Right Stuff transmission cooler lines are manufactured from quality materials to ensure performance and dependability.
( 347 )
$60.99
—
$100.99
Dorman offers a broad spectrum of parts for automotive repair and maintenance, including brake hose locks. These brake hydraulic hose lock clips are constructed from quality material for lasting durability against harsh road and weather conditions. They are designed for use in effectively securing brake hose to the vehicle. Drive with confidence with Dorman brake hardware components.
( 13 )
$6.99
Hayden Automotive offers a full line of accessories for your transmission coolers. These rubber transmission cooler hoses are available in a variety of sizes to suit your needs.
( 30 )
$36.99
Keep your heating and cooling hoses properly supported and in order with these radiator hose clamps from RESTOPARTS® Supplied. They are available for a variety of hoses and in your needed clamp styles.
( 15 )
$5.99
—
$9.99
The Stop Shop offers complete brake line sets for a wide range of vehicles—including models from Chevy, Buick, Pontiac, and Oldsmobile. These pre-bent copper, steel or stainless steel sets are exact reproductions of your stock originals, with the correct size fittings and spring guard in all the places it came from the factory. You'll receive all brake lines needed throughout the entire vehicle; this means from the master cylinder down to any blocks, out to the two front wheels, the long line that runs to the rear-end, and the two over the rear axle. Order the set recommended for your application.
( 34 )
$118.99
—
$248.99
These Global West Suspension brake line kits are made from durable braided stainless steel hose and are produced for many popular musclecars. Kits are available for both stock and aftermarket caliper combinations.
( 13 )
$81.94
Continental OE technology series flexible radiator hoses can be shaped for specific applications and are constructed to original equipment manufacturers' specifications. Their tough EPDM rubber tube and cover resist heat, ozone, and chemical coolants, and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or exceed SAE J20R4, D1 specifications. Continental OE technology series flexible radiator hoses are available for all your custom needs.
( 54 )
$14.99
—
$26.99
Clearance
Vintage Air SureFit modified refrigeration line kits are designed for use with your SureFit system. These kits include high-quality rubber hoses and fittings. The modified line leaves one end of the hosing open for proper routing and fitment in your application. They have many kits available for common modified applications. You can find your best fit here for your refrigeration restoration.
( 14 )
$173.99
—
$194.99
The Right Stuff offers you the best-fitting, most exact reproduction brake lines on the market. They utilize state-of-the-art CNC benders and automated end-forming machines to double-flare lines with remarkable consistency. The Right Stuff brake line sets are available in OEM steel or stainless steel, front or rear, and provide you with more responsive, reliable brakes for the security of an assured stop. All brake line kits feature steel fittings. Over a thousand applications are inventoried--so no matter what you're driving, there should be no problem finding The Right Stuff replacement brake lines!
( 657 )
$33.99
—
$297.99
The Right Stuff offers you the best-fitting, most exact reproduction fuel lines on the market. They utilize state-of-the-art CNC benders and automated end-forming machines that double-flare lines with remarkable consistency. The Right Stuff front to rear fuel lines are available in OEM steel or stainless steel, as well as various diameters and configurations for direct-fit replacement on hundreds of vehicles.
( 160 )
$133.99
Continental heater hoses are original equipment molded heater hoses for popular applications. The tube in Continental's universal or pre-curved molded heater hoses is made with Versigard rubber--a compound that's highly resistant to heat, oil, and weather. The patented knit reinforcement is made with Tylanar fabric--a material that meets or exceeds the requirements of SAE J20R3, D1. Additional features include: * Designed for those vehicles requiring multiple or severe bends * Original configurations to ensure a perfect fit * Fits popular applications * Rugged construction
( 26 )
$9.99
OER heater hose clamps can be used to hold the two heater hoses to the inner fender well on various vehicle models. These stainless steel replacements are a perfect upgrade for worn or unsightly OE-style clamps—or just to add a custom touch to your engine compartment. The clamps are especially useful on classic cars and trucks from the 1950s, '60s, and '70s.
( 1 )
$8.99
—
$30.79
The Right Stuff offers you the best fitting, most exact reproduction fuel lines on the market. They utilize state-of-the-art CNC benders and automated end-forming machines that double flare lines with remarkable consistency. The Right Stuff fuel pump to carburetor lines are available in OEM steel or stainless steel.
( 281 )
$24.99
—
$33.99
Keep your ride cool and running efficiently with Dayco molded radiator hoses. These OE-style replacements feature knitted reinforcement and all-synthetic EPDM rubber construction—which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 to 257 degrees F. The inner base tube of these hoses is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hoses. Dayco molded radiator hoses are available in more than a thousand configurations, with dozens of length and diameter options, to achieve fitment on most any vehicle.
( 170 )
$14.99
—
$24.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
