Availability
Showing In Stock Items. Show All 64 Items.
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 161 )
$1,022.50
—
$1,087.50
Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 83 )
$825.00
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$799.95
These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.
( 46 )
$949.95
—
$999.95
Manufacturer Rebate
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 21 )
$981.40
—
$1,006.85
McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 46 )
$995.00
Richmond Gear Pro Gear ring and pinion sets take it a step further. The gear sets are designed for race use only where hard launches and severe heat cycling occurs. They're made from a softer, more malleable 9310 steel alloy to be more resistant to breakage under harsh racing conditions. These gears feature an outstanding rotating weight loss of up to 6 pounds, ground pinion threads for trouble-free installation, and a special heat treatment for improved strength.
( 42 )
$649.58
—
$907.99
Legendary performance offering more value—Quick Fuel Street-Q carburetors deliver the power without the price. How? By retaining what's most important: the function. Street-Qs feature lightweight cast aluminum metering blocks and cast throttle bodies instead of billet components, so they cost less. But, the Q-Series performance remains: 2-circuit metering, down-leg boosters, changeable idle, high-speed air bleeds, and 4-corner idle. Plus, their universal throttle lever design accommodates Ford A/T kickdowns, 700-R4 bracket mounting holes, and the ability to mount brackets for Chrysler vehicles. Quick Fuel Street-Q carburetors fuel your passion and your budget with race-bred performance at no-frills pricing. Order the model designed for fitment on your vehicle application.
( 26 )
$773.95
—
$899.95
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 493 )
$790.99
Manufacturer Rebate
Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.
( 513 )
$787.45
—
$1,052.45
Quick Fuel HR-Series carburetors are packed full of the features that you'd expect from a high performance carb. They're available in your choice of vacuum or mechanical secondary versions, and you can select the cfm that's right for your specific engine combination. The Quick Fuel HR-Series carburetors feature screw-in air bleeds, QuickSet sight windows in the fuel bowls, 4-corner idle circuits, screw-in idle restrictions, and a bright, shiny finish for durability.
( 47 )
$799.95
RideTech HQ 7000 Series Shockwave air shocks feature a completely redesigned internal area, single-adjustable shock valving, and an impact forged body and monotube design for superior ride quality and durability. They also have easy and precise valve adjustment with 24 rebound clicks. So, if you're looking for some high-quality suspension parts for your ride, RideTech HQ 7000 Series Shockwave air shocks have you covered.
( 5 )
$945.00
RideTech HQ coilover kits are designed with handling performance and ride quality in mind. They feature impact-forged aluminum threaded body monotube, gas-pressurized shocks that have been clear anodized for corrosion protection. Other features include: oversized rod guides for maximum strength and durability; Delrin coilover spring washers for easy spring retainer adjustments; stainless steel mounting brackets; and CNC-machined billet hardware. The shocks include Hyperco springs (made with high-tensile premium cold-wound steel) that have a durable powdercoat finish. The unique pinch-clamp height adjusters offer finer threads for easy height adjustment. Order the kit designed for your specific vehicle.
( 14 )
$840.00
—
$990.00
RideTech StrongArm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of RideTech StrongArm tubular control arms; order the kit recommended for your vehicle.
( 17 )
$895.00
—
$995.00
Ringbrothers helps you customize your ride with their billet hood hinges. Making your ride show-quality means thinking about the little things--the details--and these beautiful hood hinges open up top-show possibilities! Ringbrothers invented the first billet hood hinges. They have a superior product line because of years of perfecting the machining process. For example, their special cutting fluid is mixed to a specific concentration and the water is treated to the proper ph levels before machining begins. Additionally, all of the cutters are put into a sequence during machining to eliminate as many unwanted scratches as possible. These billet hood hinges are precision-machined from 6061-T6 aluminum and include your mounting hardware. Rest assured that their quality components and materials will provide you with years of hassle-free operation. It's time to upgrade those stock hinges with quality-driven Ringbrothers billet hood hinges! Features include: * Machined from 6061-T6 billet aluminum * Direct replacement fitment * No modifications necessary * Hinges place your hood in the same position every time * Installation hardware and instructions included * Available for fiberglass or steel hoods * Available in two styles and three finishes
( 8 )
$800.00
—
$850.00
Manufacturer Rebate
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 700 )
$750.10
—
$1,051.95
You have asked, and Baer has answered! Baer is bringing back the original Baer Claw brake system that started it all, with the introduction of their Classic Series disc brake kits. They are direct bolt-ons for early GM, Ford, and Mopar applications. Front kits feature aluminum 2-piston, pad-guided calipers and vented 11 in. rotors, while the rear kits feature cast iron single-piston calipers and solid 10.5 in. rotors for maximum clearance on small wheel applications. You want to modernize your early muscle car, fit stock wheels, have easy access to replacement parts, and not break the bank. Baer Classic Series brake kits are your answer! Features include: * Red powdercoated calipers * Braided brake hoses * Slotted and drilled rotors
( 35 )
$869.95
—
$1,049.95
High performance Quick Fuel Black Diamond Q-Series 2-barrel carburetors have been engineered for circle track applications. They feature a high-flow aluminum main body with centered venturi for improved fuel distribution and efficiency. An anti-siphon check valve in the main body helps to reduce pump pullover, and the straight leg boosters enable higher airflow. Q-Series carbs have changeable emulsion bleeds and power valve channel restrictions for better tuning capabilities, as well as adjustable idle mixture screws, power valve blowout protection, and built-in dual sight glass windows for easy float adjustment. The unique PTFE coating provides a highly durable black satin finish; it's impact- and scratch-resistant, and impervious to underhood chemicals. This PTFE coating also offers a 6 percent reduction in fuel temperature, further enhancing your vehicle's performance.
Not Yet Reviewed
$949.95
On Sale
These Summit Racing™ manual transmission shifter and installation kit Pro Packs have been put together to provide your vehicle with quick, precise shifts every time. They feature a Hurst Competition Plus shifter, a shifter ball, and an installation kit for your specific transmission model. If you're ready to upgrade your shifter, then pick up one of these Summit Racing™ manual transmission shifter and installation kit Pro Packs and make smooth, accurate gear changes, shift after shift.
( 33 )
$972.90
LEED rear disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on with no cutting, drilling, or welding required. All components are new, high-quality, and precision-machined. The heavy-duty parking brake caliper will allow you to use your stock parking brake cables to actuate the parking brake.
( 19 )
$889.99
—
$1,002.99
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 80 )
$823.95
Many vehicles use rack and pinion steering, where the steering wheel turns the pinion gear, the pinion moves the rack, converting circular motion into linear motion along the transverse axis of the car. Heidts is an industry leader in hot rod and muscle car parts that you can trust for quality. They offer several choices of manual and power rack and pinions (rack only), as well as kits (may include hardware, tie rod ends, spacers, etc.). Constructed from premium materials, they allow you to replace or upgrade the units that are included with Heidts front suspension systems. Choose a rack and pinion or kit designed for your vehicle's application.
( 1 )
$756.00
Are you tired of having brake fade or not enough stopping power? The Right Stuff designed rear disc brake conversion kits give you a complete brake kit without breaking the bank. They manufacture these kits from quality materials to ensure performance and dependability.
( 365 )
$865.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
