Availability
Showing In Stock Items. Show All 15 Items.
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$759.58
—
$1,025.54
It's time to outfit your vehicle with a high-quality, high performance ignition system—and these MSD combos from Summit Racing™ make it a breeze! The kits start with a 6A digital CD ignition box, then add a high-efficiency Blaster coil and a Pro-Billet distributor. We finished the combos with a complete set of Street Fire wires to deliver all of that powerful spark! Wake up your street and strip engine with a powerful Summit Racing™ MSD complete ignition combo, available for applications as far back as the 1950s.
Not Yet Reviewed
$1,030.54
These MSD Chevy crate engine ignition kits make it easy to add MSD performance to your new crate engine. They come available with MSD's Pro-Billet HEI distributor for applications that have enough room to take advantage of an internal coil and large distributor cap. For applications with limited firewall clearance, MSD offers a kit with their Pro-Billet Ready-To-Run distributor and powerful Blaster SS coil. Both kits include a set of universal 8.5mm Super Conductor wires, Pro-Clamp wire separators, and a billet hold-down clamp. They have everything you need to light the fire in your new crate engine!
( 18 )
$799.95
—
$999.95
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 327 )
$777.95
—
$825.95
MSD Pro-Billet Ready-to-Run marine distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These distributors feature a powerful ignition module built into the billet aluminum housing. That means no extra ignition box is needed! This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down injection-molded cap, a maintenance-free magnetic pickup produces accurate trigger signals, while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom-tailor a timing curve to match your application. Their Ready-to-Run design makes installation a breeze. Simply drop one in the engine, connect three wires—and you're ready-to-run across the lake! All distributors are equipped with flame arrestor holes in their CNC-machined aluminum housings, and are supplied with a cap, rotor, gear, and weathertight wiring harness.
( 16 )
$799.95
Jesel Pro Series distributor drive kits are ideal for naturally aspirated engines. They feature Gates PowerGrip HTD belts and use Moroso Ultra Series distributor components. The balanced brass rotor tip and form-staked carbon ball on the coil lug have been designed to eliminate grounding paths and crossfiring. Jesel belt-driven distributor systems are direct bolt-on accessories to their camshaft belt drives, eliminating timing inaccuracies due to camshaft deflection and cam walk. By driving the distributor drive directly off the camshaft pulley, ignition timing stays constant and will not deviate from the initial settings. Plus, Jesel Pro distributor drives provide the ability to set the engine back further in the chassis without worrying about firewall or windshield interference.
( 1 )
$815.00
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 401 )
$825.95
Manufacturer Rebate
PerTronix Digital HP ignition system bundles make matching up the proper components for your application a snap. And you get everything you need at a value-added bundled price. Each of these bundles will include a PerTronix Digital HP ignition box, an HP 50,000 V coil, and a plug-and-play billet magnetic trigger distributor. PerTronix Digital HP bundles are available for the most popular Chevrolet and Ford engines, with black caps and your choice of black or silver anodized boxes. Choose the PerTronix Digital HP Ignition System Bundles design best suited for your application.
Not Yet Reviewed
$784.60
A great way to get all of the power that you can out of your Ford crate engine is with MSD ignition kits. These ignition kits have everything that you need for your engine to reach its full potential--an easy-to-install, ready-to-run distributor featuring a high-output module that produces a vigorous jolt across the plug gap, a Blaster SS coil that's small but mighty and features efficient E-core windings, brass terminals and Rynite housing, and 8.5mm spark plug wires with separators--"the" performance wires for incredibly low resistance without electronic interference. Ford crate engine ignition kits also include a billet hold-down clamp, and a steel gear is installed on the distributor for compatibility with hydraulic roller camshafts. Power up your Ford crate engine with MSD ignition kits.
( 10 )
$999.95
On Sale
Are you running an aftermarket fuel injection system and looking for a top-notch distributor that actually works? If so, these MSD Pro-Billet Cam Sync distributors are just what you need. They're designed to work with EFI management systems that fire the fuel injectors in the same order as the engine's firing order. They require a sync signal to know when the number one cylinder is firing and feature an adjustable sync pickup so you can set it to match your ECU's requirements (up to 60 degrees BTDC). This sync pickup uses a powerful, rare-earth magnet for strong trigger signals, and the wiring is routed through a weathertight connector for a positive-locking sealed connection. Each distributor housing is CNC-machined from billet 6061-T6 aluminum, creating a strong, precise housing. The rotor features thick vanes to stir up the air and is injection-molded from Rynite for high dielectric strength. A 0.500 in. polished steel shaft spins the rotor and is guided by a sealed ball bearing at the top and an extra-long sintered bushing at the bottom for added stability. These distributors are ready to drop in your race engine, from the bronze gear to the brass terminals of the cap. Chevrolet models have an adjustable slip collar that allows you to accurately set the distributor's installation depth in the engine. An MSD crank trigger, ignition control, and MSD 6, 7, 8, or 10 Series ignition must be used.
Not Yet Reviewed
$899.95
—
$949.95
Jesel Extreme Series distributor drive kits were introduced in 2011, and are designed to handle the high cylinder pressures experienced in Pro Stock and Pro-Mod type engines. They feature MSD 5 in. Pro-Caps to ensure accurate spark delivery, as well as to reduce spark scatter frequently experienced in high cylinder pressure applications. Jesel belt-driven distributor systems are direct bolt-on accessories to their camshaft belt drives, eliminating timing inaccuracies due to camshaft deflection and cam walk. By driving the distributor drive directly off the camshaft pulley, ignition timing stays constant and will not deviate from the initial settings. Plus, Jesel Extreme distributor drives provide the ability to set the engine back further in the chassis without worrying about firewall or windshield interference.
( 2 )
$890.00
—
$910.00
MSD Digital E-Curve distributors will drop right into your engine and fire up with three simple connections! Not only are there no external controls or boxes to mount and connect, but you can set a timing curve with the twist of a rotary dial! That's right, no more springs or stop bushings to fumble with. A new digital module lets you select from 20 different "centrifugal" curves and five vacuum curves--that's 100 combinations! Simply remove the cap to access the rotary dials and select a curve to match your application. You can also set an rpm limit that will protect your engine from over-rev damage caused by a missed shift or driveline failure.
( 35 )
$849.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
