Summit Racing SpeedCard - learn how to get 10% back up to $100

Summit Racing SpeedCard - learn how to get 10% back up to $100

Haul in the Savings - Shop the Truck Savings Event Today!

1966 DODGE DART Parts and Accessories

Part Groups

Results 1 - 24 of 204

Optima RedTop Starting 12-Volt Batteries

Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.

4.81 out of 5 stars ( 1512 )

$249.99

$279.99

On Sale

MSD 8.5mm Super Conductor Spark Plug Wire Sets

MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.

4.66 out of 5 stars ( 1946 )

$140.95

$190.95

Powermaster PowerMax Plus Starters

Powermaster PowerMax Plus starters are rated with high cranking torque and feature an offset gear reduction for increased performance. Their mounting blocks are made from durable billet aluminum and can be rotated in four positions to fit multiple locations. PowerMax Plus starters are available in either a natural or chrome finish and contain a tested dyno report in every box!

4.39 out of 5 stars ( 184 )

$187.99

$207.99

Proform Mopar Licensed High-Torque Starters

Proform Mopar licensed high-torque starters spin your engine over faster than stock models. These high-output motors deliver 40 to 50 percent more cranking power, and they're made entirely from new—not rebuilt—components. They feature the retro-style Mopar logo and fit all Mopar V6, small block and big block engines applications from the 1950s thru early '90s. Proform Mopar licensed high-torque starters feature: • 4.41 to 1 sealed gear-reduction drive and full ball bearing construction • Gear reduction-type lightweight-style with natural finish • Cast aluminum mount • For 14.0:1 maximum compression ratio engines • 100 percent new component • Offset design for more oil pan clearance

4.7 out of 5 stars ( 33 )

$211.95

QA1 Stocker Star Shocks

Want to improve the performance of your ride, without a major hassle? QA1 Stocker Star shocks could be your answer. They're lightweight, fully adjustable, and bolt right in. They rely on deflective-disc valving and have 18 levels of damping, which you can select at the twist of a knob—with the shocks in place on the vehicle. Stocker Stars have 5/8 in. hard-chromed centerless-ground piston rods, double-lip wiper seals, and one-piece, forged, machined-aluminum bodies that are bright-anodized for great looks and durability. Each shock is dyno-tested for consistency and comes with chrome or zinc plated mounting hardware. Order the model recommended for your vehicle application.

4.78 out of 5 stars ( 339 )

$202.95

Edelbrock Performer RPM Street Fuel Pumps

Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design improves flow quantity and quality—and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Performer RPM street fuel pumps produce 6 psi and do not require a regulator; and the clockable lower housing can be rotated for the best inlet and outlet alignment. They're designed for use with gasoline only.

4.32 out of 5 stars ( 419 )

$220.95

Summit Racing™ Protorque Starters

Summit Racing™ Protorque Starters are 100 percent new! Our lightweight Nippondenso-type starters offer a 4.0:1 gear-reduction ratio and a whopping 1.9 HP. That's 222 ft.-lbs of racecar cranking power. If that's not enough cranking power to suit you, there are even more powerful 3.1 hp monsters, which are a pound lighter! They have a 4.44:1 reduction ratio and churn out an awesome 342 ft.-lbs. of torque. Both of our Summit Racing™ powerhouses are suitable for engines up to 502 c.i.d., and compression ratios of up to 18.0:1. GM versions are adjustable for five mounting positions; Ford types, for 18. And, to prevent corrosion and electrical shorts, both starters wear a gold dichromate finish.

4.34 out of 5 stars ( 599 )

$215.99

Summit Racing™ OE-Style Harmonic Dampers

Summit Racing™ OE-style harmonic dampers are ideal for those mild street rebuilds that don't require the expense of a high-buck race damper. They feature durable nodular construction with bonded elastomer between the inner and outer rings. The balancers also have engraved timing marks, which means no timing tape! Summit dampers are available in a variety of sizes for many engine balance applications. Models are available for hundreds of vehicles; order the OE replacement recommended for your ride.

4.51 out of 5 stars ( 660 )

$116.99

Proform Street/Strip HEI Distributors

Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.

4.05 out of 5 stars ( 164 )

$234.99

Borgeson Universal Steering U-Joints

Top-quality Borgeson universal steering U-joints are machined on state-of-the-art CNC equipment from solid billet steel, stainless steel, or aluminum. They're available in a variety of styles and shaft end configurations. Ongoing engineering and testing ensure that Borgeson universal components meet or exceed current automotive production vehicle requirements.

4.8 out of 5 stars ( 709 )

$128.99

Powermaster Retro Alternators

Replace the alternator in your early GM, Ford, or Chrysler, while retaining its original look, with a Powermaster retro alternator. All of the alternators conform to the proper size and appearance of yesterday—while incorporating the technology of today. Plus, they all utilize OEM finishes and wiring hookups for a trouble-free installation. Retro alternators are available in a variety of case and pulley styles, amperage outputs, and wiring capabilities. Order the model designed for use on your vehicle.

4.71 out of 5 stars ( 331 )

$164.99

$194.99

The Right Stuff Brake Boosters

The Right Stuff brake boosters offer more power-assist. If you're pushing your brake to the floor, or you've lost that vacuum feeling, may need to replace your brake booster. The Right Stuff brake boosters are made from quality materials to help you stop your vehicle with minimal pressure to your brakes. A brake pedal rod extension is included with some models. Order the universal or vehicle-specific brake boosters designed for your application.

4.14 out of 5 stars ( 261 )

$231.99

PerTronix Ignitor® Solid-State Ignition Systems

PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.

4.64 out of 5 stars ( 997 )

$108.86

$118.31

Proform Stamped Steel Mopar Valve Covers

Proform stamped steel Mopar valve covers offer a heavy dose of visual appeal under the hood. The vintage Mopar emblem has been embossed into each steel valve cover, then hand-painted with a shade of blue that matches engine blocks of that era. Oil-restricting baffles are pre-installed, and the valve covers come equipped with air breather and PCV grommets (unless otherwise specified). Sold in pairs, the covers are offered in chrome plate or black crinkle finishes, and will make a great addition to any Chrysler engine. Order the valve covers in application and finish to make your Mopar stand out!

4.15 out of 5 stars ( 40 )

$116.95

$127.95

On Sale

Flowmaster 40 Series Delta Flow Mufflers

Flowmaster Super 40 Series Delta Flow mufflers go a step beyond their original 40 Series product. By precisely placing three internal baffles in the case, and welding them to exacting specifications, the 40 Series Delta Flow mufflers not only out-scavenge the originals, but they also provide superior reductions in exterior sound levels and resonance, which are transmitted through the exhaust system and into the vehicle. You get all this, plus improved torque and horsepower—and that famous Flowmaster sound!

4.72 out of 5 stars ( 144 )

$149.95

Prothane Leaf Spring and Shackle Bushings

In leaf spring type suspensions, there are significant forces focused on the pivot points and shackles. For this reason, it is imperative to replace the soft, blown-out OEM rubber bushings. Why not replace them with a set of these Prothane leaf spring and shackle bushings? They're made of premium-grade polyurethane and are precision-fabricated for a perfect fit. Plus, they won't wear out or deteriorate like the stock set. Who could ask for more?

4.5 out of 5 stars ( 94 )

$108.88

Powermaster XS Torque Starters

Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.

4.56 out of 5 stars ( 894 )

$235.99

TCI Transmission Pans

Investing in TCI transmission pans ensures the longevity of your transmission. They offer a selection of designs, depths, materials, and finishes to keep your transmission cooler and your undercarriage looking good. Skip the pans of lesser quality doomed to warp and leak; choose the policy of lasting performance from TCI transmission pans. TCI cast aluminum pans feature: * Exterior cooling fins wick away and dissipate heat * Provides additional strength and rigidity to transmission case * Ensures long transmission service-life * Include all required accessories and hardware necessary for installation TCI Max-Cool aluminum pans feature: * Black powdercoated finish * Large fluid capacity reduces internal transmission temperature * Exterior cooling fins wick away and dissipate heat * Aircraft-quality aluminum construction for strength and durability * Magnetic drain plug TCI polished die-cast aluminum pans feature: * Thicker than stock pans * Finned and polished to a high luster * Stock depth to avoid ground clearance issues * Includes drain plug for simpler fluid and filter changes * Includes necessary gaskets, filters, and installation hardware TCI chrome-plated steel pans feature: * Stock depth is easy to install * Includes drain plugs * Thicker than stock for added durability * Chrome prevents rust and adds show quality looks

4.21 out of 5 stars ( 183 )

$231.95

$245.95

Powermaster OEM-Style High-Torque Replacement Starters

Powermaster OEM-style high-torque replacement starters look like your OE starter, but pack a hidden surprise of high-torque cranking power! How do they do it? Easy--they combine an electric motor that is much stronger than a stock starter, high temp solenoid, and direct drive for serious torque. Hardware is provided for some applications, and some models also come available in a chrome plated finish.

4.42 out of 5 stars ( 524 )

$248.99

Cragar Chrome Smoothie Wheels

These Chrome Smoothie wheels will turn heads at the cruise-in and on the road with their classic good looks. Their smooth, nostalgic style is a perfect choice for your hot rod.

4.63 out of 5 stars ( 210 )

$178.25

Trans-Dapt Performance Remote Oil Filter Relocation Kits

Trans-Dapt Performance remote oil filter relocation kits allow you to move your oil filter to a more accessible location, making filter changes quick and easy. They're available in single or dual filter kits. Dual filter kits double the filtration of your oil system to keep oil cleaner and add an extra quart of oil capacity.

3.51 out of 5 stars ( 79 )

$112.99

$151.99

Addco Performance Anti-Sway Bar Kits

Reduce body roll, understeer, and generally sloppy handling with Addco Performance anti-sway bar kits. The bar is made from high-carbon steel—and is hardened and stress-relieved to give your suspension superior support during sudden or sharp turns. Most kits include 12-gauge zinc chromate plated brackets with fully enclosed bushings, along with heat-treated end link bolts for added strength. Order the model designed for your vehicle application.

4.29 out of 5 stars ( 262 )

$198.60

$235.33

Derale Engine Oil Filter Relocation Kits

Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.

3.84 out of 5 stars ( 38 )

$104.38

$112.40

QA1 Mopar Torsion Bar Adjusters

QA1 Mopar torsion bar adjusters are stock replacements for the originals for 1962-74 Mopar A/B/E-bodies and are designed to work well with factory or QA1 lower control arms. They are made from high-strength alloy steel and then zinc plated for durability. They feature a 3/4 in. hex head for easy alignment with a standard socket.

3.92 out of 5 stars ( 12 )

$126.95

Modal Header