Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
1964 CHEVROLET IMPALA Parts and Accessories
Showing In Stock Items. Show All 76 Items.
Holley Sniper EFI HyperSpark Distributor Kits
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$1,024.95
Edelbrock E-Street Cylinder Heads
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 119 )
$1,291.95
—
$1,332.95
RideTech HQ Coilover Upgrade Kits
RideTech HQ coilover upgrade kits include everything needed to provide a lowered stance with dramatically improved handling and ride quality. The system contains HQ Series coilovers and StrongArms rear tubular lower trailing arms. Features: * HQ Series coilovers utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine tuning via a rebound adjustment knob and come standard with a 1,000,0001 Mile Warranty. Hyperco springs are used to provide a consistent spring rate that will last a lifetime. * Rear StrongArms provide added strength to help get the power to the pavement. They utilize R-Joint Technology to provide smooth operation and reduce roll bind. The lower arms feature a double sheer mount for the coilovers locating them in place of the stock springs, keeping the load where it belongs.
Not Yet Reviewed
$1,410.00
Quick Fuel SS-Series Carburetors
These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.
( 48 )
$1,024.95
MagnaFlow Street Series Performance Exhaust Systems
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 613 )
$1,039.00
OER Authorized Complete Floor Pans
OER Authorized complete floor pans are manufactured to original factory specifications. Each floor pan features original style contours that match the OE design and are finished with a rust prevention that is ready to paint. A great choice for the serious builder!
( 6 )
$1,148.99
Edelbrock Performer RPM Cylinder Heads
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 168 )
$1,040.50
—
$1,252.50
McLeod RXT 1200 Clutch Kits
Intended for the high horsepower street/strip fan, McLeod RXT 1200 twin disc clutch kits are able to handle 1,200 crank horsepower. With a higher clamp load than standard RXT twin disc clutch kits, RXT 1200 clutch kits can handle almost any horsepower you can throw at them and still remain streetable. Ceramic-lined clutch discs provide smooth engagement with a stock-like pedal feel to make them ideal for the street performance enthusiast. A flat-style flywheel with a crank relief of 6.250 in. diameter or less is required for proper fitment.
( 12 )
$1,295.00
Quick Fuel Q-Series 4-Barrel Carburetors
Get big-time performance with Quick Fuel Q-Series 4-barrel carburetors with high-flow main bodies, which include either down-leg or annular boosters, screw-in idle and high-speed air bleeds, accelerator pump discharge nozzles, and a blended venturi area. These carburetors have CNC-machined billet metering blocks with 4-stage emulsion to provide more precise fuel metering, improve throttle response, and give a more uniform fuel performance curve. With so many great benefits and their blend of performance and drivability, it's no wonder that these Quick Fuel Q-Series carburetors are the popular choice. So, go ahead--throttle it up with Quick Fuel!
( 46 )
$1,126.95
—
$1,499.95
The Right Stuff 4-Wheel Disc Brake Conversion Kits
The Right Stuff 4-wheel disc brake conversion kits offer everything that you need for your application in one kit without "braking" the bank. If you're experiencing brake fade or need more stopping power, The Right Stuff kits are manufactured from top-quality materials, including Timken bearings to ensure performance and dependability. These 4-wheel disc brake conversion kits are the most complete packages available, so do the job right with The Right Stuff kits.
( 54 )
$1,299.45
Summit Racing™ MSD Complete Ignition Combos
It's time to outfit your vehicle with a high-quality, high performance ignition system—and these MSD combos from Summit Racing™ make it a breeze! The kits start with a 6A digital CD ignition box, then add a high-efficiency Blaster coil and a Pro-Billet distributor. We finished the combos with a complete set of Street Fire wires to deliver all of that powerful spark! Wake up your street and strip engine with a powerful Summit Racing™ MSD complete ignition combo, available for applications as far back as the 1950s.
Not Yet Reviewed
$1,055.40
Classic Performance Tubular Control Arms
Classic Performance tubular control arms are designed to add up to five degrees of caster in certain applications, while providing full wheel travel. They're manufactured from 1.250 in., 0.120 in. thick wall DOM tubing, with pivot barrels made from 1.500 in., 0.188 in. thick wall DOM tubing to help eliminate distortion. These control arms use bushings made from self-lubricating, non-squeak patented material that will outlast any rubber or polyurethane bushing. The control arms are designed as bolt-in replacements for your factory originals. Classic Performance tubular control arms will tighten up your front suspension and give you that performance ride through the corners and on straight roads. Select the model and options recommended for your vehicle.
( 125 )
$1,034.99
Wilwood Forged Dynalite Rear Parking Brake Kits
Wilwood forged Dynalite rear parking brake kits provide the best solution for many rear axles requiring a parking brake. The forged billet Dynalite 4-piston calipers, one-piece drum/rotors, and high-friction pads provide balanced braking for all types of performance street, strip, and show machines. Their internal shoe parking brake design stays hidden, but has excellent static holding power for parking. Wilwood offers optional caliper finishes and rotor designs to enable the builder to personalize the style and optimize brake performance for every individual application.
( 122 )
$1,125.84
—
$1,263.34
Wilwood Forged Dynalite Pro Series Front Disc Brake Kits
Wilwood's Forged Dynalite Pro series front disc brake kits are designed to provide unmatched performance with classic, high-tech styling for a wide variety of street rods, musclecars, hot rods, and heavy drag cars. The kits combine the powerful clamping force of Dynalite calipers with the added performance and cooling capacity of competition-style vented rotors. Other features include hubs, brake pads, caliper brackets, mounting hardware, and detailed instructions for an easy bolt-on installation. In addition to everything else, these kits can also cut as much as 35 lbs. off of your front-end.
( 201 )
$1,307.37
—
$1,307.40
ididit Retrofit Column Shift Steering Columns
The hot rod experts at ididit put a lot of time and research into these retrofit steering columns, ensuring a perfect fit for your specific vehicle. They are designed to fit in the factory location and, in many cases, will put the steering wheel back in its original location. They include self-canceling turn signals, 4-way flashers, and knobs and handles. The columns are designed for use with aftermarket steering wheels.
( 57 )
$1,014.00
—
$1,279.00
Classic Performance Show Stopper Hydraulic Brake Assist Kits
Classic Performance Show-Stopper hydraulic brake assist kits provide you a beautiful upgrade for your manual or vacuum-assisted brakes. They're designed to work off your standard power steering pump. The Show-Stopper kits include a chrome aluminum master cylinder, billet aluminum firewall mounting bracket, chrome accumulator cover, stainless pressure hoses, rubber return hoses, and all necessary fittings and mounting hardware. CPP also offers the hydraulic brake assist unit separately. Stop quicker with one of these Classic Performance Show-Stopper hydraulic brake assist kits.
( 16 )
$1,128.99
Edelbrock Performer Cylinder Heads
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,059.50
—
$1,065.50
McLeod Street Twin Clutch Kits
McLeod Street Twin clutch kits are designed to be high performance replacements for your OEM clutch. They include everything you need--a new disc, pressure plate, and your choice of a billet steel or billet aluminum flywheel. McLeod Street Twin clutch kits are pre-balanced to fit specific applications and include the correct alignment tool for installation.
( 4 )
$1,125.00
—
$1,399.00
LEED Brakes Front Disc Brake Conversion Kits
LEED front disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on and precision-machined.
( 72 )
$1,029.99
—
$1,272.99
Aldan American Road Comp Suspension Packages
Aldan American Road Comp suspension packages are available for a variety of applications, including many GM muscle cars and 1990s era GM trucks. Their coilovers are machined from lightweight, high-strength 6061 T-6 billet aluminum. They are fully ride-height adjustable, allowing a stock height to 2.0 in. of lowering, for maximum performance and on-road comfort. The coilover kits are designed for an OEM-like fitment using factory shock and spring mounting locations. These coilovers can be used with factory or aftermarket tubular control arms. Dial in your suspension with the Aldan Road Comp package recommended for your vehicle.
( 6 )
$1,249.95
On Sale
Hays Street 650 Clutch Conversion Kits
Hays Street 650 clutch conversion kits are designed to handle highly modified engines up to 650 hp naturally aspirated (600 hp for forced induction and nitrous combinations). The new 26-spline versions work in conjunction with a modern 5- or 6-speed transmission swap. These are true street/strip clutches for spirited high performance driving or frequent track use. The high performance dual-friction disc utilized in the Street 650 has an upgraded spring hub with heavy-duty damper springs to handle greater shock loads versus a standard damper spring. The disc features a sintered metallic friction surface and an organic friction surface. It does a great job at dissipating heat and fighting the slippage found in ordinary discs, along with providing the smooth engagement characteristics of a street-style clutch. These conversion kits also provide an upgraded heavy-duty pressure plate to round out the performance clutch. The Street 650 is a great choice if you visit the track often. Order the model recommended for your vehicle application. Features and benefits: * Upgraded damper springs deliver up to 30 percent more clamping pressure than stock OE clutch * Dual-friction disc offers the best of both worlds—smooth engagement and excellent holding capacity * All Street 650 clutch kits come complete with pressure plate, disc, throwout bearing, and alignment tool
( 6 )
$1,075.95
Be Cool Show & Go Modules
It's show time! Be Cool Show & Go modules will wow the judges with their mirror-like finish. Not only do these modules look show-car great, but their cooling performance will receive top honors as well! These power-cooling modules come with all you need to add stunning performance and appeal to your custom engine compartment. Pop your hood and let everyone appreciate the ultimate expression of cooling technology--the brilliance of American-made Be Cool Show & Go modules! Be Cool Show & Go cooling modules feature: * Polished performance-grade dual 1 in. core radiator * Black fans with billet Be Cool logo motor covers * Fan mounting brackets and hardware * Polished aluminum vented recovery tank * Polished billet aluminum radiator cap with Be Cool logo * Wiring harness with temperature control sending unit and relays
( 8 )
$1,499.99
McLeod Magnum Force Clutch Kits
McLeod Magnum Force clutch kits are the perfect choice for racers looking for lightweight, high-torque capacity units. They are specifically designed for oval track, road race, and dry lake applications. The McLeod Magnum Force clutch kits are offered in single, double, and triple-disc combinations. Available for most input shaft splines, the McLeod Magnum Force clutch kits feature optional pin or strap floaters to rattle and have bolt-on counterweights for balanced engines.
Not Yet Reviewed
$1,295.00
Doug's Headers Stainless Steel Headers
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 29 )
$1,126.75
