Availability
Crown Automotive spindle nut sockets for your spindle drive wrench are constructed from steel with a black finish. Crown Automotive has more than just the quality parts you need to keep your Jeep tip-top. They also have the right tools to get the job done easily, while keeping your fingers and screwdrivers out of the grease. These sockets are well-built and tough.
( 6 )
$10.99
Crown Automotive spindle nuts allow you to replace your stock nuts easily. Spindle hardware should be replaced if it shows signs of wear or during a rebuild. These OE replacement parts are an exact fit for your Jeep. They're available individually or in kits with the washers included. Check the attributes for the right parts for your application.
( 2 )
$11.99
Crown Automotive steering knuckle seals install between the steering knuckle and axle housing. Kits may include retaining plates and seals and are application-specific. Check attributes for proper fitment. Crown Automotive is renowned for manufacturing the highest quality OE replacement parts.
( 5 )
$13.99
—
$24.99
Soften the blows with Crown Automotive frame bump stops. These simple, but very effective, low-cost stops are available in sizes, shapes, and materials to cushion your suspension, keep metal parts from hitting together, and improve the quality of your ride. Crown Automotive offers a great selection of frame bump stops to match your rig's performance.
( 40 )
$10.99
—
$11.99
Shock absorbers that bottom out or aren't long enough put excessive stress on mounts, causing cracks, and sometimes even breakage. Crown Automotive shock mounts are designed and built to OEM specs for excellent fit and reliable performance. These steel, weld-on brackets are excellent choices for replacing older or damaged units when stock shock lengths will do.
( 4 )
$19.99
Crown Automotive headlight bezels are available to replace cracked or broken bezels. Whether you're doing a restoration or a repair, you need to keep your headlights shining in the right direction. These direct fit parts make the job easier. Crown headlight bezels are offered in various materials and finishes to complement most Jeep applications.
( 12 )
$11.99
When you see oil leaking from your Jeep's rear axle, it's time to order new Crown Automotive axle seals. These seals are designed for oil bath axles and are built identically to the originals for excellent fit and finish. Whether your brakes end up coated in oil or the lube simply runs onto the ground, these economical Crown Automotive axle seals will solve messy problems that could lead to more serious issues. Dozens of styles are available to service numerous vehicle applications.
( 13 )
$11.99
Crown Automotive transfer case gaskets sets consist of seals and gaskets for rebuilding your transfer case. Keep it up-to-date and running sharp with quality replacement components from Crown.
( 6 )
$17.99
Steering systems on 4WD vehicles take a great deal of abuse, whether driving through a snow storm or a rock garden. When the steering gets a bit sloppy, count on Crown Automotive tie rod ends to get your vehicle back on the straight and narrow. Constructed of strong metal materials, these OE-style ends are correctly threaded to match the originals, with a rubber boot to hold in grease. The failure of even one tie rod end can cause a dangerous driving situation. Consider quality replacements from Crown Automotive.
( 4 )
$10.99
—
$25.99
Replacement hood latches from Crown Automotive are recommended for Jeep owners who want to top stop hood fluttering, especially at high speeds. They are sold individually or in pairs. Keep your hood in place with Crown latches.
( 8 )
$13.99
For those who insist on proper brake line maintenance, Crown Automotive replacement brake hoses are designed to the same specifications as the OE units. They feature zinc plated metal ends for corrosion protection, rubber tubing for flexibility, and factory-style end attachments for easy installation without adapters. A pinhole leak in a brake line can ruin your day; a blown line could end it. Stay ahead of any stopping issues with Crown Automotive brake hoses.
( 20 )
$10.99
—
$19.99
Keep your fender flares attached to your Jeep with a nice, tight fit. Crown Automotive fender flare retainers are made to OE-style for your application. When you're replacing your fender flares and your old retainers are rusted out, you'll find that Crown aftermarket parts are made for direct-fit ease of installation on your vehicle.
( 15 )
$25.99
Quiet the chatter in your rear axle. Crown Automotive limited slip additive enables the clutch and plate to glide smoothly over each other, by modifying the behavior of the gear oil to reduce friction and quiet noise. Give your limited slip differential Crown additive for a smooth, peaceful ride.
( 1 )
$13.99
Crown Automotive replacement brake hub dust caps seal out moisture and dirt. They are made from quality steel and are zinc plated.
Not Yet Reviewed
$11.99
Crown Automotive leaf spring hangers are engineered for an exact fit and ultimate durability. They provide your leaf springs with superior support, while offering a hassle-free installation. Replace your damaged or broken hangers with new Crown Automotive hangers for ultra-stable performance and a long-lasting service life.
( 1 )
$12.99
Make sure you have a leak-free seal at the gas tank. Crown Automotive fuel tank grommets are made from durable rubber and fit right in your fuel tank. They are built to OEM specifications so they'll slide right in place and accept your factory gas tank filler neck.
( 23 )
$10.99
Crown Automotive crankshaft seals are one of the most important parts of your car. These rear main seals are made from durable materials and are designed to handle extreme pressure and temperatures, as well as the caustic chemicals in your engine oil. They're located at either end of the crankshaft and allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear, and replacement is the only cure when one malfunctions. Crown offers a large line of replacement seals, packing, and kits for your vehicle.
( 5 )
$11.99
Crown Automotive rear view mounting bracket kits will allow you to re-mount a rear view mirror in your Jeep, Chrysler, or Dodge vehicle. The kits include cleaning solution, button and adhesive. Order the model designed for your application.
Not Yet Reviewed
$11.99
Crown Automotive spindle bushings will keep your vintage or newer Mopar on the road. They are made from quality materials to look, fit, and function just like the originals. Keep your Mopar moving with Crown.
( 2 )
$11.99
Whether your vehicle's gearbox has sprung a few leaks or it's time for a complete rebuild, look to Crown Automotive for their manual transmission gasket kits. They are designed and built to OEM specs for excellent fit and reliable performance. Refer to the notes for included pieces. Crown Automotive manual transmission gasket kits can help keep trails open and your garage floor clean.
( 4 )
$14.99
The right amount of illumination is an important factor when it comes to road safety. Crown Automotive dimmer switches ensure that you're always in control of the brightness of your vehicle's headlights. They are manufactured out of top-quality materials that meet or exceed the OE design. Additionally, they provide you with a direct fit for the correct specifications of your vehicle. Crown Automotive dimmer switches put you in control of having the proper amount of lighting for a safer drive.
( 6 )
$16.99
Suspension flex, rough terrain, and time all play havoc with hard rubber parts. Crown Automotive transfer case mount kits provide the components necessary to safely hold your vehicle's transfer case. They are designed and built to OEM specs for excellent fit and reliable performance.
Not Yet Reviewed
$14.99
It's not always easy finding replacement parts for a Jeep or Willys vehicle from the 1950s or '60s—but Crown Automotive caters to Jeep and Mopar enthusiasts! These brake shoe hold-down hardware kits are versatile for the left or right, front or rear drum brake applications. The inexpensive components can save you a lot of headaches and help restore performance to a key part of your braking system.
( 1 )
$11.99
Improve the performance and durability of your suspension with Crown Automotive leaf spring mounting plates. They are constructed of sturdy steel with a black finish and most attach using your existing hardware. Crown leaf spring plates are available in front and rear positions for vintage and classic Jeep models. Order the model designed for fitment on your specific ride.
( 7 )
$14.99
Modal Header