Availability
Showing In Stock Items. Show All 264 Items.
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$227.95
—
$652.95
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 16 )
$2,349.95
—
$2,549.95
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 439 )
$374.95
—
$749.95
Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 125 )
$2,375.95
—
$2,534.95
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design improves flow quantity and quality—and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Performer RPM street fuel pumps produce 6 psi and do not require a regulator; and the clockable lower housing can be rotated for the best inlet and outlet alignment. They're designed for use with gasoline only.
( 422 )
$177.95
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 9 )
$1,949.95
—
$2,149.95
Summit Racing™ induction kit Pro Packs start with the Edelbrock EPS Performer intake manifold, which builds horsepower and torque from idle to 5,500 rpm. Summit Racing™ induction kits also include an Edelbrock 600 cfm Performer carburetor and a 14 in. chrome steel Summit Racing™ air cleaner, plus zinc plated Summit Racing™ carb studs, a Summit Racing™ stainless steel intake bolt kit, and a Fel-Pro Printoseal intake manifold gasket set. These kits are compatible with both the 260 hp and 290 hp versions of this engine and are designed for smooth street performance.
( 23 )
$774.86
Street Demon carburetors redefine street carburetors with clean looks and ease of use. They offer enthusiasts a straightforward design to deliver stable idle, amazingly crisp throttle response, and smooth performance. With optimized calibration and a dual mounting pattern, they are ready to run right out of the box. The carburetors feature an integrated fuel bowl/main body design with the gasket above fuel level and have no plugged passages, eliminating all potential leak paths. Additional features include: * Available with either a ball burnished aluminum, polished aluminum, or black aerospace composite fuel bowl * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * Dual mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold. Adapter may be required. * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 388 )
$499.95
—
$549.95
Summit Racing™ mechanical fuel pumps are affordable replacements that deliver superior flow. They're available in two versions; one has 1/4 in. NPT inlets and outlets, provides 5.7 to 8 psi, and can free-flow 80 gph. That's twice what a normal pump delivers. The other has 3/8 in. NPT ports, delivers 6.5 to 8 psi, and can free-flow a hefty 110 gph. These pumps are offered in different finishes; and the lower housings of each unit can be rotated through 360 degrees for easy installation in tight spaces. Order the model recommended for your year/make and engine application.
( 515 )
$60.99
—
$75.99
Quick Fuel Slayer Series carburetors offer affordability, great looks, and impressive adjustability. Economical horsepower performance is not a dream! Quick Fuel Technology has engineered their Slayer Series of 600 cfm and 750 cfm street carburetors with everything you want at a price you need to fit your budget. Their hand-built quality and all-aluminum construction are outstanding—but consider these additional features: changeable idle air and high-speed air bleeds, 3-stage emulsion circuits, changeable primary idle feed and power valve restrictions, vacuum secondary adjustment screw, and unique secondary metering plate with changeable jets. Pursue horsepower and get more dollar power with the carburetors that let you tune "your way" and offer show-quality appeal—Quick Fuel Slayer Series carburetors.
( 220 )
$499.95
—
$549.95
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 566 )
$270.95
—
$595.95
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 23 )
$299.95
—
$484.95
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 221 )
$296.95
—
$607.95
Quick Fuel HR-Series carburetors are packed full of the features that you'd expect from a high performance carb. They're available in your choice of vacuum or mechanical secondary versions, and you can select the cfm that's right for your specific engine combination. The Quick Fuel HR-Series carburetors feature screw-in air bleeds, QuickSet sight windows in the fuel bowls, 4-corner idle circuits, screw-in idle restrictions, and a bright, shiny finish for durability.
( 47 )
$699.95
—
$799.95
Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street applications. Power bands range from 3,500 to 7,000 rpm, on up to 4,500 to 8,000 rpm. There are applications for small block and big block engines, as well as for 2-barrel and 4-barrel carburetors. Some manifolds accept standard restrictor plates and carb adapters.
( 61 )
$425.95
—
$663.95
Edelbrock Pro-Flo 4 XT EFI systems provide you with a high performance Pro-Flo XT-style intake and 90mm throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 XT EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled XT intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2.5-bar TMAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 21 )
$2,754.95
—
$2,888.95
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 352 )
$161.95
$104.95
—
$231.95
AFR Eliminator Series intake manifolds are the perfect way to "eliminate" your competition! These cast aluminum performance intakes have a 23-degree manifold configuration. They're designed for standard location intake port cylinder heads. Additional coolant outlets have been added at the rear of the manifold for custom cooling systems. Eliminator intakes can be run "as cast," right out of the box; however, AFR does recommend having the runner exits be "port matched" to your particular cylinder heads for optimal performance. Additional bungs have been cast into the top of the intake runners for EFI injectors or nitrous nozzles. Multiple heights and rpm ranges are available; order the manifold recommended for your application.
( 23 )
$412.65
—
$669.90
ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more consistent torque loading. These bolts are available with either hex or 12-point heads, and washers are included.
( 395 )
$19.99
—
$29.99
These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.
( 48 )
$949.95
—
$999.95
Summit Racing™ Stage 3 dual-plane intake manifolds are based on our Stage 2 intakes, with the same high-rise design, long separated runners, and 1,500-6,500 rpm powerband. For even more power, we added an open area under the plenum, which provides airflow to keep the fuel/air charge cooler. These intakes are the perfect compliment to your street and strip performance upgrades. The cast-aluminum intakes are CNC-machined for a precise fit, and have a square bore flange and natural finish. Chevrolet intakes will clear HEI ignition systems.
( 70 )
$257.99
Prevent cam damage from fuel pump lobe wear. COMP Cams has a reputation for being a problem solver. When a high-pressure fuel pump is run with a steel roller cam core, the stock fuel pump pushrod is not compatible with the steel core. You can damage an expensive roller cam as a result of wear at the fuel pump lobe. COMP Cams offers several fuel pump pushrods in response to this problem.
( 76 )
$37.95
—
$52.95
Legendary performance offering more value—Quick Fuel Street-Q carburetors deliver the power without the price. How? By retaining what's most important: the function. Street-Qs feature lightweight cast aluminum metering blocks and cast throttle bodies instead of billet components, so they cost less. But, the Q-Series performance remains: 2-circuit metering, down-leg boosters, changeable idle, high-speed air bleeds, and 4-corner idle. Plus, their universal throttle lever design accommodates Ford A/T kickdowns, 700-R4 bracket mounting holes, and the ability to mount brackets for Chrysler vehicles. Quick Fuel Street-Q carburetors fuel your passion and your budget with race-bred performance at no-frills pricing. Order the model designed for fitment on your vehicle application.
( 26 )
$773.95
—
$899.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
