Availability
Showing In Stock Items. Show All 34 Items.
Are you tired of fighting cooling problems? Get Be Cool factory fit aluminum radiators to fix the issue. They feature a crossflow design, two 1 in. diameter cooling row tubes, all-aluminum construction, and a billet filler neck. These radiators are perfect bolt-in replacements for your stock radiator. No modifications are required for installation, so there's no cutting, fitting, or welding required. Available for manual or automatic transmissions, Be Cool factory fit aluminum radiators will provide the extra cooling capacity that you've been looking for.
( 24 )
$599.99
—
$829.99
"The cooling is in the copper." Johnson's Radiator Works engine swap radiators feature a 4-row, 2 3/4 in. thick, high-flow copper core, ideal for the best cooling efficiency possible. They are made with heavy-gauge steel side brackets and mounting holes pre-stamped where needed. Antique, vintage, or classic, Johnson's has a radiator guaranteed to cool your vehicle and engine setup. Additional features: * Copper core with one-piece brass tanks * Brass tubes made in-house--125 in. x 0.5 in. * Top tanks stamped from .040 deep draw brass * Quality control start to finish from raw material to finished product * Made with original tooling, equipment, and techniques from Walker * Designed to operate with a 15 to 18 lb. radiator cap (except Flathead application 7 lb. cap recommended) * Brass drain cock
( 3 )
$1,290.00
—
$1,350.00
Clearance
Wise Guys Seats' split-bench seat frame and foam with individual center fold-down arm rest is purposely designed to fit into your vintage vehicle. The assembly features split, center fold-out arm rests, four recliner release points, and no-sag springs. These seat frames are powdercoated for durability, and they include Flexalator spring system backs. You'll enjoy a retro look, modern amenities, and comfort in the right spot! Additional details: * Two 12 V power receptacles * 16-gauge steel construction * Multiple density foam types
Not Yet Reviewed
$1,400.99
$1,022.50
Leaf spring suspension systems have been around for ages and have been used in many different brands and models. Even today, you can find plenty of cars equipped with them because they're affordable, work well controlling the roll of the vehicle and absorbing the imperfections of the road, as well as acceleration and brake forces. Equip your classic with a great ride using Chassis Engineering leaf springs. They can be found in their suspension kits, and are also offered individually for replacements. Rear leaf springs and slider springs are available for early model Chevy, Ford, and Dodge vehicles. Choose the pair made for your vintage truck or car.
( 1 )
$575.00
On Sale
Clearance
RJays ladder bar kits are a perfect addition to any street rod. They fit 1928-48 Fords and many other universal applications, including rat rods or drag racers. Built from heavy-wall 7/8 in. DOM steel tubing and TIG-welded with 1/4 in. thick gussets, these ladder bars can handle any horsepower you throw at them—while maintaining a very traditional look. Complete kits are available with dropped or straight crossmembers. All mounting hardware, bushings, clevis, and rear-end brackets are included. Order the model recommended for your vehicle.
( 4 )
$479.99
—
$499.99
$259.50
—
$290.50
Chassis Engineering bolt-on IFS mounting kits eliminate bump steer and other unpleasant surprises, resulting in a safe and enjoyable ride. These custom-made, fully bolt-on crossmember kits are based on the Pinto-Mustang II independent front suspension system and will provide the best method available to get the correct height geometry. They will lower your car about 2 to 4 in. when compared to stock. Plus, with the adjustable upper coil spring pods, there is about 2 1/2 in. of additional adjustment possible to further fine-tune your setup. Chassis Engineering bolt-on IFS mounting kits features include: * Exclusive adjustment system * Interlocking design * Superior strength * Easy and accurate installation
( 4 )
$1,012.00
Upgrade your vehicle's stopping power with Classic Performance front disc brake kits. They include a pair of vented brake rotors and calipers, brake hoses, a bearing kit, seals, banjo bolts, and spindle nut kits. These kits are available with your choice of standard solid brake rotors or high performance cross-drilled and slotted rotors. Order the model designed for fitment with your vehicle and bolt pattern application.
( 41 )
$549.99
Clearance
Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options
( 4 )
$4,099.99
—
$4,596.99
$2,549.50
—
$3,372.50
Baer Brakes Baer Claw Pro+ disc brake systems are built to please the most demanding users. They include Baer 6P compact 6-piston calipers machined from 2618 forgings, resulting in the stiffest possible design, even at extreme operating temperatures. They use radial mounting configurations to disperse loads evenly, and internal fluid transfer tube passages for an ultra-clean look. Baer Claw Pro+ disc brake systems include brake rotors with zinc coated surfaces and a matched set of brake pads. The unique 2-piece rotors use an aluminum hat to reduce overall weight, allow for differential expansion of the rotor plates, and lower thermal transfer to the hub. Nearly 700 models are available for specific vehicle, bolt pattern, and axle applications.
( 8 )
$2,794.95
—
$2,994.95
Baer Brakes Baer Claw Extreme+ disc brake systems are Baer's flagship offerings, featuring their forged Monoblock calipers mounted to 2-piece rotors. The Extreme+ systems employ current state-of-the-art race technology usually only found in very expensive race calipers. Baer now brings that technology to the road-going market. The 6S line of calipers represent Baer's most aggressive road offering and are suitable for virtually any level of track use. Optional R-Spec 6R calipers are a race version of 6S calipers; available for any Extreme+ system. The R-Spec calipers feature additional machining to the 6S calipers to save close to 2 lbs. per caliper and allow for top-loaded pads. Over 400 models are available for specific vehicle, bolt pattern, and axle applications. Features include: * MonoBlock calipers machined from a single piece of 2618 forged aluminum * The only 6-piston, forged, mono-block calipers offered to the road-going/street market * Stainless steel pistons, abutments, and noise-suppression springs * Staggered piston sizes to minimize pad wear * Uses the common D1247 (DR11) race pad backing plate, shared by many competition calipers * Dual seals (dust/weather and pressure) to meet D.O.T specifications * Caliper can accept 13.5 in. to 16 in. rotors * Machined, hand-painted logos * Available in a variety of powdercoat finishes * Uses correct banjo-style fittings; Baer does not use any pipe thread * Available for front or rear * Offers the exact same look front and rear—the only brake manufacturer that offers this! * Rear systems incorporate a drum-in-hat parking brake * Rear systems for C-clip axles include Baer's Verislide self-centering brackets * Systems include everything needed for each corner, including hoses and fittings (except for general fit applications)
Not Yet Reviewed
$4,094.95
—
$4,099.95
Helix Mustang II IFS suspension packages and kits will give your car or truck the excellent handling of independent suspension with added stopping power! IFS kits come in many different configurations with the necessary components and hardware. And with over a thousand kits to choose from, they are sure to have what you need to fit your wants and budget. From complete systems with chrome columns to their Stage 1 kits that allow you to use off-the-shelf components to complete your setup, and everything in between, Helix has the Mustang II IFS systems and kits to revolutionize your vehicle's suspension.
( 17 )
$2,199.95
—
$3,499.95
AFCO has made it easier than ever to complete your radiator installation with their electric fan and aluminum shroud kits. These kits are engineered to be efficient and easy to install. They are available with either a single or dual electric fan in a variety of cfm ratings to better suit your application needs. The shrouds are made of aluminum, and come in natural or polished finishes, and include stainless steel mounting hardware for installation. If you desire the absolute best—you want AFCO Racing performance parts.
( 4 )
$388.99
On Sale
Griffin exact fit radiators feature an OEM-style stamped tank and are made of high-quality lightweight aluminum. They provide seamless installation with no modifications required—and will deliver optimum cooling performance for your auto, truck, musclecar, or hot rod. The radiators are available in downflow and crossflow styles, with many size options for specific vehicles.
( 177 )
$1,239.00
$1,115.10
Helix CornerKiller IFS front suspension will revolutionize your suspension and give your car or truck the ride and handling it deserves. Each front suspension is specially designed to give your classic ride modern handling and stopping power by updating all of the critical parts. Helix starts with precision-made components that are designed to work together. Tubular control arms provide the adjustability you need to setup the suspension for your car, while your choice of standard to 2 in. drop spindles help you customize the stance. Topping off the spindles is a set of 11 in. disc brakes to provide extra stopping power. Rack and pinion steering is provided by either power assist or manual racks. Finally choose between coilovers for maximum handling and a static stance or air struts for the ultimate in ride height control and ride quality. Bring your classic ride into modern days with a Helix CornerKiller IFS front suspension package.
( 3 )
$2,849.95
—
$4,099.95
Do you want cooling improvement and performance? During a test, a Be Cool aluminum radiator was installed in a 1955 Chevy in about an hour and lowered its operating temperature from 220 degrees to 180 degrees F--even with the air conditioning going full-blast. Be Cool custom-fit aluminum radiators are designed to be an exact fit, and they feature 15 percent more cooling capacity than factory 4-core models. What's more, they can be used with all brands of antifreeze and are available in both standard and polished finishes.
( 122 )
$749.99
—
$829.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
