Availability
Showing In Stock Items. Show All 40 Items.
Stromberg E-Fire electronic distributors actually look like they rightfully belong on your traditional flathead motor. They feature a simple, built-in electronic ignition. No points, no condenser, no black or red box, no maintenance--no worries. These crab-style units bolt on like a stocker with a black cap, and they're easy to properly install with just two wires to your regular coil. Order a Stromberg E-Fire electronic distributor for your Ford flathead and bolt it on—it works straight out of the box! Features and specs: * 2- or 3-bolt mounting options available to match your application * Available in your choice of 6 V positive or 12 V negative ground * Designed as short as possible with hot rod builders in mind, so you can use the stock fan * Timing adjuster is on the side, so you don't have to turn the whole body * Static timing, advance rate and max total advance specifically tuned to suit the flathead V8 * Old-school performance tag with a unique ID number * For use with a points-style 1.5 ohms coil only
( 11 )
$435.00
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 901 )
$275.99
—
$365.99
Powermaster PowerGEN alternators feature all of the quality construction and dependability the company is known for. They combine the looks of a generator with the output and reliability of an alternator. PowerGEN units offer one-wire operation, producing up to 90 amps, with a whopping 60 amps at idle—and a regulator is included with all models. Alternators are available in either black powdercoated, chrome, or polished finishes. Order the Powermaster PowerGEN replacement designed for use on your vehicle application.
( 167 )
$374.99
—
$542.99
Clearance
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks in applications set up to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to, be it a street rod, muscle car, classic truck, or that special ride, Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These are standard stock replacement tanks for carbureted engine applications. If you have retrofitted your engine for electronic fuel injection, please see the Tanks Inc. EFI-Ready Fuel Tank options.
( 403 )
$299.99
Bob Drake wiper motor kits are designed to easily replace the original, sluggish vacuum-drive units. Each kit features a super dependable, 2-speed electric wiper motor with switch, Drake's custom engineered mounting brackets, and hardware. These easy-to-install kits use the original motor location and attach to your original wiper linkage. Bob Drake wiper motor kits include detailed installation instructions.
( 2 )
$250.99
Instant Rebate
Patent-pending centering technology for Fluidampr CT gold harmonic dampers is targeted for superior control of crankshaft torsional vibration experienced during Circle Track and drag racing applications--specifically aimed toward vibrations above 6,000 rpm. These dampers allow your crankshaft to be balanced with the Fluidampr installed and also allow the inertia ring to remain centered in the housing cavity when the damper is at rest. CT gold harmonic dampers are available in internal or external applications.
( 1 )
$470.06
Bob Drake reproduction trunk handle and base kits are works of art—no detail is overlooked. Every component perfectly matches the factory original. They are ready to install with stainless key cover and keys; handle, base, glass lens, lens gaskets, 12 V bulb, wiring, special socket, extension nuts, inner base, shaft seal, rubber pad, key cylinder with 2 keys. All mounting hardware is included with these complete kits. The replacement units are designed for a variety of Ford vehicles from the 1940s.
( 1 )
$357.99
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 353 )
$321.99
Edelbrock cylinder head gaskets provide the best sealing solution for your engine. Edelbrock relies on industry-leading manufacturers to ensure their head gaskets will provide optimum fit and sealing properties when used with Edelbrock cylinder heads. These replacement gaskets are machined from high-density materials to precise specs--for applications from the 1940s and up.
( 58 )
$261.95
Helix stock height spindles provide precision forged construction for the ultimate in strength and dependability. They meet or exceed OEM specifications, retaining stock factory geometry with precision digital engineering processes, and Helix's updated manufacturing methods ensure spindles can handle stress better than the originals. Choose a pair of spindles designed for your vehicle.
Not Yet Reviewed
$299.95
On Sale
Clearance
RJays ladder bar kits are a perfect addition to any street rod. They fit 1928-48 Fords and many other universal applications, including rat rods or drag racers. Built from heavy-wall 7/8 in. DOM steel tubing and TIG-welded with 1/4 in. thick gussets, these ladder bars can handle any horsepower you throw at them—while maintaining a very traditional look. Complete kits are available with dropped or straight crossmembers. All mounting hardware, bushings, clevis, and rear-end brackets are included. Order the model recommended for your vehicle.
( 4 )
$479.99
—
$499.99
$259.50
—
$290.50
On Sale
RAM HDX clutch kits are ideal for vehicles that will see mild street and occasional track use. These performance minded clutch kits will provide more clamping pressure over a stock unit and can handle power levels up to 450 hp. All HDX kits feature an increased clamp load pressure plate while providing smooth clutch engagement with only a slight increase in pedal effort. The HDX clutch disc features RAM's premium organic facing material for optimum performance. Most RAM clutch discs utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 64 )
$523.02
$470.72
Cast flywheels are not explosion-proof and can be dangerous when used in high performance applications at higher rpm. RAM billet steel flywheels are recommended as replacements for factory-cast flywheels in high performance and racing vehicles. Made in America and produced in-house, all RAM flywheels are computer balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. They're better for launching heavier drag race cars and provide better drivability in street vehicles. SFI-approved, RAM billet steel flywheels are CNC-machined from certified materials. Order the model recommended for your year/make and engine application. Technical note: As they spin, heavy flywheels store more energy than lighter ones. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. When choosing a flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Insufficient gearing will cause an engine with too light of a flywheel to "bog" on launch.
( 135 )
$369.00
SafeTBoy 3-point retractable airplane buckle lap belts offer safety every time your buckle up. These modern over-the-shoulder belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-operate, aviation-style flip buckle. SafeTBoy retractable buckle belts are CAD-designed and engineered to fit comfortably across your waist, and then smoothly return to their place when unbuckled. SafeTBoy belts are FMV-approved, and provide the security and protection you need in your vehicle.
( 13 )
$259.50
—
$399.50
For budget or stock-style rebuilds, it's hard to beat the value of Sealed Power cast pistons. They're made from high-quality aluminum alloys and feature a carefully controlled casting, heat-treating, and CNC-machining process. And, because they're designed and manufactured to exceed OEM specs, these pistons provide improved reliability, performance, and a long service life. Hundreds of models are available—find the size and style designed for your engine application.
( 46 )
$259.99
SafeTBoy 3-point retractable push button buckle lap belts offer safety every time your buckle up. These modern over-the-shoulder belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-operate, push button-style buckle. SafeTBoy retractable buckle belts are CAD-designed and engineered to fit comfortably across your waist, and then smoothly return to their place when unbuckled. SafeTBoy belts are FMV-approved, and provide the security and protection you need in your vehicle.
( 78 )
$259.50
—
$399.50
Instant Rebate
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
( 143 )
$524.68
AFCO has made it easier than ever to complete your radiator installation with their electric fan and aluminum shroud kits. These kits are engineered to be efficient and easy to install. They are available with either a single or dual electric fan in a variety of cfm ratings to better suit your application needs. The shrouds are made of aluminum, and come in natural or polished finishes, and include stainless steel mounting hardware for installation. If you desire the absolute best—you want AFCO Racing performance parts.
( 4 )
$388.99
If you're building an all-out competition car, then you need a lightweight flywheel that will allow the engine to rev quicker and not eat up a lot of power. RAM billet aluminum flywheels greatly reduce rotating weight to permit quicker revving and higher power output, but still retain enough mass to resist heat distortion that could adversely affect clutch performance. RAM billet aluminum flywheels are made in America and produced in house. All RAM flywheels are computer-balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. SFI-approved, these flywheels are CNC-machined from certified materials and have rugged steel friction-surface inserts. RAM's billet aluminum flywheels feature a 1/4 in. thick friction insert to dissipate heat away without distortion. Technical note: As it spins, a heavy flywheel stores more energy than a lighter one. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. To effectively use a lighter flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Too little gear will cause the engine to 'bog' on launch.
( 31 )
$489.00
SafeTBoy 2-point retractable airplane buckle lap belts offer safety every time your buckle up. These lap belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-operate aviation-style flip buckle. SafeTBoy retractable buckle belts are CAD-designed and engineered to fit comfortably across your waist, and then smoothly return to their place when unbuckled. SafeTBoy belts are FMV-approved, and provide the security and protection you need in your vehicle.
( 4 )
$369.96
Instant Rebate
Heidts has stabilizer bars for the front and rear of your hot rod and muscle car applications. Constructed from heat-treated steel, these anti-sway bars will help make your ride more stable and combat body roll. You'll feel more in control and enjoy your drive more. Keep the contact between your tires and the winding roads more level with Heidts stabilizer bars.
( 23 )
$255.60
—
$270.90
AutoLoc Flat-Glass power window conversion kits allow you to convert your old flat-glass windows into a completely new power system. AutoLoc's revolutionary Super Glide window design ensures an easy installation and smooth operation. Each kit comes with high-torque worm-gear driven Bosch motors, reinforced guide tracks, and adjustable window bases, all of which facilitate quick, quiet, and dependable performance for the life of your vehicle. Select the model with the switch and wiring harness options preferred.
( 18 )
$349.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
