Availability
Buy one of these qualifying items and earn more savings! Similar to gift certificates, Summit Bucks rewards you earn today can be applied to Summit Racing orders in...
Buy one of these qualifying items and earn more savings! Similar to gift certificates, Summit Bucks rewards you earn today can be applied to Summit Racing orders in the future.*
*Not redeemable for cash; cannot be used to buy gift cards.
Buy one of these qualifying items and earn more savings! Similar to gift certificates, Summit Bucks rewards you earn today can be applied to Summit Racing orders in the future.*
*Not redeemable for cash; cannot be used to buy gift cards.
Showing In Stock Items. Show All 51 Items.
Summit Bucks
ACDelco GM Genuine Parts fuel feed lines are GM-recommended replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. These original equipment lines will provide the same performance, durability, and service life you expect from General Motors. Order the model designed to fit your application.
( 5 )
$15.99
—
$236.99
Summit Bucks
Russell stainless steel braided fuel hose kits are quality-engineered to replace stock fuel hoses and come to you complete and ready to run. Their stainless steel outer braid is built tough to resist abrasion and corrosion and the kits are designed with anodized aluminum hose ends. Best of all, they easily connect to OE components for a very professional and reliable installation that lasts!
( 30 )
$21.95
—
$59.95
Summit Bucks
These Russell ProClassic II dual fuel inlet kits feature an all-black, nylon fiber braided outer cover over a chlorinated polyethylene (CPE) synthetic rubber inner line for abrasion resistance. The CPE inner liner incorporates a bonded, multi-braid stainless wire that improves the bend radius with less possibility of collapsing when the routing hoses are in tight areas. They are safe for use with fuel, oil, and antifreeze. To complement this new hose, the ProClassic II dual fuel inlet kits also feature aluminum black anodized hose ends. If a high-quality, traditional looking hose is what you're seeking, Russell ProClassic II dual fuel inlet kits are the answer.
( 9 )
$54.95
Summit Bucks
Russell's dual fuel inlets for Holley and Demon carburetors are fully assembled and ready for installation. They feature stainless steel braided hose construction with anodized AN fittings and fuel bowl washers.
( 35 )
$54.95
—
$103.95
Summit Bucks
Russell dual fuel inlets for Holley and Demon carburetors are fully assembled and ready for installation. They feature lightweight Russel ProClassic hose construction with black anodized AN fittings, and fuel bowl washers.
( 25 )
$63.95
—
$64.95
Summit Bucks
These Russell stainless steel fuel line kits suitable for Honda®/Acura® come complete and ready to run. They feature Russell stainless braided hose and anodized aluminum hose ends. The kits are designed to replace the pressure line between the fuel rail and fuel filter. Their stainless steel outer braid resists abrasion and corrosion, offering maximum protection and reliability. Their CPE synthetic rubber liner with a nylon inner braid is compatible with all hydrocarbon and alcohol-based fuels.
( 1 )
$54.95
Summit Bucks
The feed limit low valve in listed GM transmissions limits line pressure feed to the default disable solenoid and control valves. Feed limit low pressure is also connected to the boost ball system for "A" and "B" clutch control. This feed limit low valve is subject to significant side-load force, resulting in severe wear and pressure loss to the default disable solenoid and connected control valves. Such pressure loss can put the vehicle into default mode at high speeds, resulting in momentary wheel lockup, sudden downshift to 2nd gear, harsh shifts or a P0747 code. The feed limit low valve can wear out in as little as 30,000 miles, with many vehicles requiring service by 35,000 miles. A national recall from GM includes installing updated software that monitors valve performance and wear, then triggers a check engine light and reduced propulsion message 10,000 miles before failure. Vehicles are then limited to 5th gear, commonly referred to as limp mode, until the valve body is serviced to address the failed valve. Sonnax patented this drop-in feed limit low valve kit to overcome bore wear, restoring proper valve function immediately without the need or expense of replacing the entire valve body. The valve reroutes the balance circuit through an internal passage, significantly reducing the side-load force, while upgraded materials prevent future wear. * The kit overcomes drivability issues related to the GM 10-speed wheel lockup recall * Patented valve and sleeve combination overcomes bore wear and significantly reduces future side loading of the valve * Hardcoat anodized aluminum valve and wear-resistant sleeve combat premature wear * Drop-in Zip Valve parts install quickly and easily * Kit contents: -- Valve -- Sleeve -- Spring -- Retainer -- Drill -- Rivet (Note: The OE feed limit low valve is susceptible to premature wear and therefore a critical failure point. Replacing the valve is recommended even if the transmission isn't exhibiting problems and the valve passes a vacuum test.)
Not Yet Reviewed
$26.86
Summit Bucks
ACDelco fuel injector feed and return pipe O-rings are professional, premium aftermarket replacement parts. They are manufactured to meet expectations for fit, form, and function. Get the performance and dependability you expect from ACDelco.
( 3 )
$1.99
Summit Bucks
Bore wear at the compensator feed regulator valve allows critical pressure loss that prevents proper clutch timing and control, resulting in harsh shifts, bind-up, and possibly, burnt clutches. You can recover hydraulic control and renew shift performance by installing a Sonnax compensator feed regulator valve kit. These kits featuring a Sonnax drop-in Zip Valve provide you with valve, spring, sleeve, and retaining clip to restore normal compensator action. Features and benefits: * Hardcoat anodized aluminum valve combats premature wear * Highly wear-resistant aluminum sleeve provides additional valve support * Includes calibrated spring for restoring OE compensator pressure * Drop-in Zip Valve parts install quickly and easily
Not Yet Reviewed
$38.44
Summit Bucks
Sonnax actuator feed limit valve kits eliminates problems with the OE AFL valve design in GM 4L60-E, 4L65-E and 4L70-E units. OE designs have a large reaction area and are highly affected by side loading which wears the valve body bore, resulting in lower oil pressure to the shift solenoid and lower line pressures. Sonnax kits include a redesigned AFL valve and a wear-resistant sleeve to regulate pressure and re-establish proper pressure control. The hardcoat anodized aluminum valve features annular grooves to prevent side loading and has 54 percent more support by operating in the full contact sleeve. Sonnax kits include valve, sleeve, spring, and retaining clip.
( 1 )
$37.81
Summit Bucks
When it's time to change the fuel lines on your vehicle, look to ACDelco for GM-recommended replacements—including fuel feed, vapor, and return hose assemblies. The lines are available in a wide range of sizes, materials, and configurations for fitment on countless vehicles from the 1990s and up. Order the model designed for your application.
( 8 )
$44.99
—
$295.99
Summit Bucks
ACDelco GM Genuine Parts turbocharger oil line gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles. When servicing your GM vehicle, choose the parts that guarantee the correct fit and leak-free performance--ACDelco GM Genuine Parts turbocharger oil line gaskets.
Not Yet Reviewed
$2.99
Summit Bucks
Sonnax heavy-duty remanufactured valve bodies are built to overcome chronic shift and converter clutch apply complaints. It provides firmer shifts and a moderately increased pressure curve to improve performance, especially in truck and towing applications. Numerous Sonnax valve upgrades are included to restore hydraulic clearances that lead to shift complaints, clutch distress, converter complaints and codes, solenoid issues and pressure problems. Line pressure rise has been moderately increased to overcome shift complaints, delayed engagements, and to increase holding power to the clutches. To guarantee the highest level of operational performance, this remanufactured valve body is tested on state-of-the art equipment to verify that solenoid feed, clutch, converter, and line pressures match or exceed OE specifications. Choose your preferred kit packaged for your transmission. The valve body includes the following: * Oversized TCC regulator valve and sleeve, and limit valve spring for firmer TCC application * O-ringed bore plugs and abuse plugs * New accumulator control valve and sleeve with spring * Oversized AFL line up * New forward accumulator piston and seal * New pressure switch manifold * New EPC solenoid * New TCC PWM solenoid Kit contents: * Remanufactured valve body * Separator plate * Upper case gasket plate * Lower valve body gasket plate * 1-2, 3-4 accumulator springs * EPC solenoid harness adapter for 2003 to later units * Sonnax line pressure booster kit
( 3 )
$372.32
—
$582.46
Summit Bucks
GM 6L45, 6L50, 6L80 and 6L90 automatic transmission units may exhibit multiple line pressure and cooler/converter/lube flow problems due to excess wear in the pressure regulator bore. Deterioration at the balance spool end allows critical fluid loss, resulting in high line pressure, harsh shifts, and overheating due to reduced cooler/converter flow. Wear at the outboard spool robs converter feed pressure and lowers line pressure, resulting in soft shifts and burnt clutches. Installing a Sonnax pressure regulator valve kit restores the hydraulic integrity of these circuits for proper line pressure control in all ranges. A new pressure regulator valve outer spring is also included to replace weakened original springs and provide a modest 5 psi increase across the pressure curve. Additional details: * Hardcoat anodized aluminum valve combats premature wear * Lengthened critical spools operate in non-worn portion of bore for added stability and wear prevention * Annular grooves help center valve in bore to reduce future side-load wear * Drop-in Zip Valve parts install quickly and easily Kit contents: * Valve * Spring * Drill bit .040 in. * 2 checkballs (1 extra)
( 2 )
$13.40
—
$62.55
Summit Bucks
Sonnax throttle valve plunger kits address the poor line rise or no detent downshifts that can be common complaints in vehicles with a stock overdrive transmission. The steel plunger continuously reciprocates within the aluminum sleeve, wearing out the sleeve. This wear (plus the weak OE spring) allows throttle valve feed oil to leak past the plunger and exhaust, resulting in the aforementioned issues that can lead to 3-4 clutch failure. Sonnax throttle valve plunger kits include an improved throttle valve spring designed to properly maintain higher line pressure and improved throttle valve performance. Order the kit recommended for your transmission application. Features and items: * High-quality aluminum sleeve prevents wear * Tight-tolerance sleeve and plunger restore hydraulic integrity * Eliminates the part throttle sleeve orifice * Spring * Sleeve * Plunger
( 2 )
$41.99
—
$45.87
Summit Bucks
Continuous oscillation in relay valve and sequence valve bore causes wear that prevents proper hydraulic control. You can recover hydraulic control and renew 2nd and 4th gear operation by reconditioning the entire bore and installing a Sonnax oversized 4-3 sequence valve kit. These kits address wear on the inboard two spools that is increasingly more common in aging valve bodies. Wearing at these spools can allow valuable 4th servo feed leakage, resulting in no 4th and 2-4 band wear, and can also allow leakage of 2nd clutch oil needed to apply the 2-4 band in 2nd gear, resulting in poor 2nd gear shifts. Leaking at the OE end plug also allows oil loss that can leave 4th gear inoperable. Sonnax oversized 4-3 sequence valve kits feature hardcoat anodized aluminum valves to combat premature wear and O-ringed end plugs to help prevent 4th gear oil loss. Kit contents: * 3-4 relay valve * 4-3 sequence valve * Spring * End plug * Two O-rings (1 extra)
Not Yet Reviewed
$51.20
Summit Bucks
Sonnax servo release check valve kits are unique solutions. Since the GM 4L60 (700-R4) and 4L60-E Series transmissions were introduced, they have had inadequate metering of 2nd gear band servo release oil resulting in 3-4 clutch pack failure. The 3-4 clutch pack and 2nd gear band are just not properly synchronized. Sonnax servo release check valve kits combine an orifice with a ball check valve to resolve these issues and successfully extend the life of 3-4 clutches, and improve the 2-3 shift feel. Other benefits: * Provides sufficient exhaust so that 3-2 downshifts are smooth * Calibrates 3-4 clutch feed orifice without creating shift concerns
( 4 )
$10.60
On Sale
Summit Bucks
Boost Products USA silicone air duct hoses can be used for brake ventilation, interior ventilation, suction hose, or for air supply to the air filter. These cold air feed flexible ducting pipe hose/ventilation hoses are equipped with an outer skin of special extremely durable and hard-wearing, orange-colored silicone, complete with outer fiber reinforcement and inner bronze-coated steel spiral spring, for maximum strength but extremely low weight. Boost air duct hoses are 6 ft. in length and offered in several diameters in black or red.
Not Yet Reviewed
$46.06
—
$92.12
$41.45
—
$82.91
Summit Bucks
ACDelco Specialty fuel hoses are low-permeation, premium hoses for your fuel feed and return, PCV and EEC systems. They are approved for use with leaded and unleaded gasoline, diesel, bio-diesel, E-85, methanol, ethanol, and gasohol fuels. They are equipped with a patented 5-layer technology that keeps fuel out of the environment while delivering peak fuel efficiency. ACDelco Specialty fuel hoses have oil, heat, ozone, and abrasion-resistant covers. They are available in multiple sizes and lengths to accommodate any project.
( 1 )
$16.99
On Sale
Summit Bucks
Boost Products USA double wire hose clamps are especially suitable for flexible cold air intake/ventilation hoses with wire inserts. The double wire of the clamp provides a high holding force of the cold air hose and prevents the wire insert from slipping away when tightening. These clamps are made of very high-quality SS304 stainless steel to resist rust and corrosion. They're available in sizes for a wide range of hose diameters. (NOTE: Only suitable for flexible intake hoses / ventilation hoses with wire insert! For example, cold air feed intake hoses for brake cooling.)
Not Yet Reviewed
$1.99
—
$2.96
$1.79
—
$2.66
Summit Bucks
Clearance
ACDelco diesel emission fluid system components help your DEF system to continue operating properly. Available for most applications, ACDelco offers most major components in the system, including modules, level sensors, caps, heaters, feed lines, and tanks. Order the replacement parts recommended for your application.
Not Yet Reviewed
$43.99
$21.50
Summit Bucks
These Pro Pipe exhaust systems are the latest evolution in the Vance & Hines 2-into-1 legacy. These spectacular systems give you the bling and the bang. The Pro Pipe systems combine specially tuned, length-stepped headers with a highly efficient merge collector. They then feed into a stepped megaphone design that provides the perfect amount of sound. Vance & Hines Pro Pipe exhaust systems come complete with header and collector heat shields, as well as a shield over the first step of the megaphone. A beautifully CNC-machined, chrome plated billet end cap rounds out the look. Vance & Hines Pro Pipe exhaust systems will bring your bike into a new millennium.
Not Yet Reviewed
$1,199.99
—
$1,249.99
Summit Bucks
Vance & Hines' Hi-Output RR exhaust systems were inspired by their team that competed in the King of the Baggers class of the MotoAmerica Road Racing Championships. These systems capture every pulse-quickening element of their racing exhaust system into one you can put on your Milwaukee-Eight Road Glide or other Touring model as part of your own performance bagger build. Constructed of lightweight, high-grade 304 stainless steel, the hand TIG-welded headers step from 1.75 in. to 1.875 in. to 2.0 in. and feed into the same oversized collector used on the race system. The collector is even rotated to add extra ground clearance, enabling steeper lean angles through the turns. Finishing each system is a mid-length 4 in. Hi-Output megaphone emblazoned with the same double-layered laser-cut riveted badge from the race system. It features Vance & Hines innovative PCX (Power Chamber Exhaust) technology, which integrates a chambered high-flow catalyst for a bigger boost in torque off the line and roaring out of the corners. Vance & Hines Hi-Output RR exhaust systems are available in Brushed Works finish or matte black. Choose the one your prefer for your motorcycle.
Not Yet Reviewed
$1,549.99
Summit Bucks
ACDelco offers a full line of GM Genuine Parts turbochargers. These stock replacements help to force more air into internal combustion engines, creating more power with each piston stroke. The turbos are crafted from alloy iron to fit each vehicle application. A gasket/seal is included, and no programming is required. Whether you drive a Chevy, Buick, GMC, or Cadillac, there's an OE model ready to restore the power you're missing. Maintain your ride with a GM Genuine Parts turbocharger from ACDelco.
( 2 )
$439.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
