Summit Bucks

DRP Performance Hub Defenders Bearing Spacers

Bearing spacers are used in virtually every application in professional motorsports, and they make the most difference of any low drag hub upgrade. Reduce friction and roll faster with DRP Performance Hub Defenders. These bearing spacers increase wheel speed by over 1,200 percent, allow the bearings to run cooler, and reduce hub maintenance. Simple to install, DRP Hub Defenders have a threaded adjustment, allowing the user to quickly set bearing end play or preload, and a setscrew locks the spacer at the desired adjustment. Once installed, they do not need to be readjusted unless you replace the hub or bearings. Select the Hub Defenders with the proper specs for your application.

Not Yet Reviewed

$28.19

—

$68.25

Summit Bucks

DRP Performance Premium Low Drag Bearing Kits

DRP Performance offers premium low drag bearing kits for a wide range of applications, including many Ford, Chevy, and Pontiac cars from the 1960s, '70s, '80s, and '90s. Low drag hub components reduce friction and lower temperatures, making your wheels spin easier, delivering more horsepower to the track—all while reducing maintenance and making your race car faster. Enhance your performance on oval track asphalt, oval track dirt, drag racing, road racing, and street applications. Kits include a DPR bearing spacer, DRP Premium Super finished Bearing Kit, and DRP Ultra low drag seal. Here are details on each component: * DRP Bearing Spacer: A difference you can feel—in the pits and on the track. Bearing spacers make the most difference of any low drag hub upgrade. Properly installed, these spacers will provide an immediate increase in hub free spin, an improvement large enough to feel just by pushing the car around. And the benefit doesn't stop there. Bearing spacers make the most difference when a side load (cornering force) is applied. Drivers have commented on how much faster a car with bearing spacers free rolls when entering and through the center of the corner. Bearing spacers simplify and reduce hub maintenance. Spindle nut torque is no longer sensitive. In fact, with spacers installed, you can tighten the spindle nut as much as you want without overtightening the bearings. (DPR recommends 20-40 lbs.-ft.) Bearings will run cooler and do not need to be repacked as often. Bearing spacers are simple to install. DRP bearing spacers have a threaded adjustment, allowing the user to quickly set bearing end play or preload. A set-screw locks the spacer at the desired adjustment. Once installed, they do not need to be readjusted unless you replace the hub or bearings. Bearing spacers are used in virtually every application in professional motorsports. * DRP Premium Super finished Bearing Kit: Reduce bearing temperature by over 100 degrees F verses stock bearings! Increase free spin by over 250 percent! DPR starts with premium quality bearings and puts them through a super finishing process. This process removes the grind marks and greatly smooths the surface of the bearing roller, while leaving a "hatch" pattern to retain grease. Quality wheel bearings will last the life of most racing applications. * DRP Ultra Low Drag Seal: …billet aluminum, full PTFE sealing lip, reusable, great for any application: dirt, asphalt, road race, street Decrease seal drag by over 1,000 percent! Air gap seals create an "air curtain" to keep debris out and eliminate drag completely! DRP Ultra Low Drag hub seals are true, purpose-built, high performance seals. The housing is made from lightweight aluminum. The sealing element is a special PTFE blend, giving it natural low friction qualities. Seals are reusable. Order the kit recommended for your vehicle.

Not Yet Reviewed

$49.87

—

$271.00

Summit Bucks

DRP Performance Bearing Spacer Installation Kits

Speed up the process of bearing and bearing spacer setup with DRP Performance bearing spacer installation kits. These dial calipers allow your install to be more precise. Increased accuracy and faster installation, what could be better? DRP Performance bearing spacer tools are available to fit the many different spacer sizes. Select the correct size needed.

Not Yet Reviewed

$83.84

Summit Bucks

DRP Performance Ultra Low Drag Hub Seals

DRP Performance ultra low drag hub seals are premium quality, full-PTFE lip seals. They offer less than 1 in.-lb. of resistance per seal. The lightweight aluminum house provides a true seal to prevent debris from getting to the hub bearings. Seals increase hub free spin and reduce drag and rotating weight. Reusable when removed properly. Order the size designed for your application.

5.0 out of 5 stars ( 1 )

$25.04

—

$35.70

Summit Bucks

DRP Performance Bearing Packers

DRP Performance offers the right tools for the job! These bearing packers are available in mini and full-size versions. They are used to efficiently and cleanly repack wheel bearings with grease, flushing out old grease and injecting new grease. These tools feature a universal design to pack any bearing properly. No overpacking and no mess!

Not Yet Reviewed

$93.50

Summit Bucks

DRP Performance Premium Low Drag Bearing Race Kits

DRP Performance Premium low drag bearing race kits are specialized steel wheel bearing races for high performance automotive racing. They're designed to reduce friction and drag at the wheel hub, making race cars faster. Key features: * Performance enhancement: By lowering temperatures, reducing friction, and decreasing drag, the races increase the "free spin" of the hub. This allows a race car to carry more speed through turns * Specialized finishing process: DRP uses a proprietary, hours-long finishing process to treat the races. This includes smoothing the surfaces and micro-etching a pattern to better retain grease. The result is a much cooler and smoother-running hub compared to standard bearings * Material and fitment: The kit includes inner and outer steel wheel bearing races specifically manufactured for "Wide 5" style hubs, or 5x5 hubs with 2 in. pin spindles

Not Yet Reviewed

$57.77

—

$58.14

Summit Bucks

DRP Performance Ultra-Low Drag Bearing Grease

Working with Kluber engineers, DRP developed a very impressive wheel bearing grease. A good quality grease for short track applications, DRP Performance Ultra-Low Drag wheel bearing grease was found to offer a 70+ percent increase in free spin, per DRP. Available in syringe or cartridge sizes, select the amount needed. DRP Performance Ultra-Low Drag bearing grease advantages: * Reduces grease drag * Increases wheel spin * Reduces maintenance

Not Yet Reviewed

$45.65

—

$78.59

Summit Bucks

Denso Air Conditioning Compressors

Denso air conditioning compressors are all-new units built to meet Denso's unsurpassed reputation for technological superiority. As one of the world's largest OE suppliers of A/C compressors, Denso units are specified by most major vehicle manufacturers. They're manufactured and tested to the strictest OE standards for unparalleled performance. Denso brings together everything they know as an air conditioning systems manufacturer to deliver the highest quality line of factory-new compressors available. When it comes to new compressors, you can't do better than going with a unit manufactured by the OE supplier. Denso knows these units better than anyone because they originally designed them. Hundreds of models are available—for applications from the 1980s and up. Order the model recommended for your vehicle. Additional features of Denso air conditioning compressors include: * Denso First Time Fit provides the right part and the right fit ... the first time, every time * Snap rings improve performance under extreme heat * Thrust bearings built to withstand tension and stress for maximum durability * Valves and shafts designed with lightweight aluminum alloy for added strength * OE-specified O-rings and seals compatible with both R12 and R134a refrigerants * Factory O-ring installation kits prevent leakage and ensure proper installation * PTFE surface-treated pistons for smooth, efficient operation * Lightweight aluminum alloy swash plates for added strength * Includes the proper OE specified oil

4.3 out of 5 stars ( 30 )

$168.99

—

$862.99

Summit Bucks

Mobil Delvac Xtreme Grease

Mobil Delvac Xtreme Grease is an extra-high performance extreme-pressure lube. It's an NLGI 2 grade and is manufactured with a proprietary, high-temperature lithium complex thickener system. This grease exhibits excellent resistance to softening under severe working and provides good adhesion and cohesion. An extreme-pressure additive provides exceptional protection against wear and shock loads, while additional additives enhance resistance to rust and high-temperature oxidation. Other formulation features provide very good resistance to water wash, and long service in bearings operating at high temperatures. This heavy-duty, severe-service grease has outstanding structural stability and chemical stability—it will not corrode steel or copper bearing alloys, and is compatible with conventional seal materials. Mobil Delvac Xtreme Grease is recommended for use in heavy-duty trucks, especially hinge and bucket pins, U-joints, and fifth wheels. It is also recommended for construction and mining sector applications—particularly for the lubrication of plain and antifriction bearings in contractor and mining vehicles working under severe operating and weather conditions. Mobil Delvac Xtreme Grease is also ideal for use in heavily loaded industrial bearings.

5.0 out of 5 stars ( 3 )

$5.99

Summit Bucks

Denso Remanufactured Starters

Denso remanufactured starters are subjected to a rigorous test and replacement routine that produces the lowest return rates in the replacement aftermarket. And every starter is exactingly bench-tested to ensure factory-original performance. Remanufactured components offer tremendous value, and by recycling valuable parts and precious raw materials, they're the environmentally responsible choice as well. Denso First Time Fit remanufactured starters are the ideal choice. Key features and benefits of Denso remanufactured starters include: * Solenoid coil 100 percent voltage tested. * All terminal bolts replated or replaced with copper to ensure a clean source of electrical current * Commutator polished, gauged, and performance tested * Housing re-tapped to OE standards and damage-checked for heat warping, corrosion, or improper surface alignment; then refinished * Pinion gear inspected and replaced as needed to meet engineering specifications * Field coil inspected and high-voltage tested * Armature cleaned and high-voltage tested to ensure reliable performance * All-new bearings, brushes, and seals * Maximum cranking torque under all conditions * Designed to start in extreme cold and hot weather conditions

4.71 out of 5 stars ( 21 )

$93.99

—

$410.99

Summit Bucks

Denso Remanufactured Alternators

Denso alternators are not only original equipment on many of the world's top production cars; they are a favorite in motorsports as well, where their light weight, high-efficiency, and durability make them the natural choice. Denso remanufactured alternators go through a grueling process; stators and rectifiers are tested to 300 V, while rotors are submitted to 600 V, to ensure reliable performance. Rotor slip rings are buffed to an 8 micron surface finish, with run out limited to 20 microns, minimizing brush wear and abrasion. Bearings are validated to OE standards and loaded with premium OE-specification lubricants. Offered in wide range of amp ratings for hundreds of specific vehicle applications, all alternators meet Denso's rigorous First Time Fit standards. Contemporary vehicles employ dozens of sophisticated electronic systems, placing heavy demands on the charging system. The alternator is no place to cut corners. Additional features of Denso remanufactured alternators include: * Meet or exceed all manufacturer standards, and provide years of reliable service * First Time Fit provides perfect mounting with no belt/pulley alignment issues * Housings re-tapped and damage-checked for heat warping, corrosion, or improper surface alignment * Voltage regulators 100 percent tested to OE standards * All hardware stripped and replated * Premium cores and precise OE-assembly benchmarks * Designed to meet grueling heat and electrical requirements * OE-quality fit and appearance * Full compatibility with sensitive electronics systems

4.53 out of 5 stars ( 43 )

$96.50

—

$508.99

Summit Bucks

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a polished pulley kit and TKX manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 5-speed TKX Transmission Package: * McLeod Super Street Pro twin-disc clutch * Hydraulic throwout bearing * Bellhousing * Non-weighted billet flywheel * Starter * Gear ratios are 2.87:1 (first), 1.89:1 (second), 1.28:1 (third), 1.00:1 (fourth), and 0.68:1 (fifth) * Torque converter with 2,200–plus rpm stall Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plug wires * Champion 3015 spark plugs (0.040 in. gap) * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys. Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

Not Yet Reviewed

$22,449.00

Summit Bucks

BluePrint Builder Series 427W/541HP Cobra Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Cobra Edition Builder Series combos pair engine and transmission, eliminating guesswork, making it easier to gain the performance you desire. These combos match a fuel injected Ford small block-compatible 427 c.i.d. engine with a TKX manual transmission enabling the production of 541 hp and 519 lb.-ft. of torque with a compression ratio of 10:1. BluePrint high-strength cast iron engine block: * 4.125 in. bore * 4-bolt main * One-piece rear main seal * 9.500 deck height Rotating assembly: * Forged crankshaft * Stroke: 4.000 in. * Forged 6.250 in. connecting rods * Forged pistons * Internally balanced Aluminum cylinder heads: * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 205cc intake/70cc exhaust runners Hydraulic roller camshaft: * .608 in. intake/.608 in. exhaust valve lift * 248 intake/258 exhaust duration at .050 in. of lift * 114 degrees lobe separation angle (LSA) TKX transmission package: * Mcleod Super Street Pro single disc clutch * Hydraulic throwout bearing * Steel bellhousing * Billet flywheel * Starter -- First gear ratio: 2.87:1 -- Second gear ratio: 1.89:1 -- Third gear ratio: 1.28:1 -- Fourth gear ratio: 1.00:1 -- Fifth gear ratio: 0.81:1 Also included: * Ribbed Cobra-style aluminum valve covers * Holley Sniper 2 EFI system * Aluminum oval air cleaner with Cobra Script * Harmonic balancer * Thermostat and thermostat housing * EFI fuel pump kit * Timing cover * Oil filter * Powdercoated oil pan * Spark plugs and wires * Plug wire separators * Polished front accessory drive: -- Driver side standard rotation water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut air conditioning compressor

Not Yet Reviewed

$28,499.00

On Sale

Summit Bucks

Mishimoto Oil Cooler Kits

Enthusiasts who push their high performance cars to the limit understand the importance of keeping their oil temperatures low to prevent damage, or even seizure of the engine. Mishimoto oil cooler kits are designed to extend the life of your engine by ensuring that your essential high-wear engine components, such as piston rings, skirts, and cam bearings, are sufficiently lubricated with cooler oil. The kits include a durable aluminum oil cooler, stainless steel braided hose lines, fittings, and all necessary adapters. Models are also available to cool transmission oil/fluid. Order the universal or vehicle-specific cooler that's best suited for your application.

4.59 out of 5 stars ( 49 )

$809.95

$43.16

—

$747.55

Summit Bucks

Arroyo Tamarock M/T Tires

The Arroyo Tamarock M/T tires offer several benefits, particularly for off-road and mud-terrain performance. They feature aggressive tread blocks for enhanced grip in wet, muddy, or snowy conditions, and self-cleaning grooves to eject debris, ensuring consistent traction. The Arroyo Tamarock M/T tires also boast a silica compound for flexibility and all-weather traction, along with a rigid center block for damage resistance. Key features: * The rugged tread blocks and aggressive silica compound provide excellent grip in various conditions, including mud, rain, and snow * Solid square shoulder increases the contact area between tread and ground greatly, improves the grip and bearing capacity of wet and dry road, making more stable driving * Aggressive sidewall design helps protect the casing from damage caused by stones and impacts and enhances grip when in deep mud or rock climbing * Despite this tires aggressive tread pattern, they are designed for a quiet and comfortable ride on paved roads * Excellent driving performance, the optimum ratio of rubber and void on the tread and the special stepped edge treatment removal of dirty under extreme off-road conditions effectively * The flat footprint and ideal tread design allow for consistent contact with the road surface, improving steering responsiveness and handling * Water and snow drainage performance—the wide and deep pattern groove design enhances the anti-skip performance of tires under rainy and snowy road greatly

Not Yet Reviewed

$232.99

—

$276.99

Summit Bucks

Dunlop K81/TT100 Tires

In 1969, the K81s became the first tires to lap the Isle of Man TT course at over 100 mph on a production bike ... and the rest is history. Dunlop K81/TT100 tires are specially designed tires that are popular for the restoration of older British bikes and others to original specs. They bear the same unmistakable Dunlop style, but benefit from ever-evolving tire development to bring lightweight and classic bikes a traditional tire with cutting-edge performance and durability. The KK81/TT100 tires are H-speed rated and feature an aggressive tread pattern with a continuous center groove to ensure straight-line drivability. Plus, perfectly angled deep grooves offer excellent dry and wet road traction.

5.0 out of 5 stars ( 1 )

$152.99

—

$161.99

Summit Bucks

DRP Performance Seal Drivers

DRP Performance seal drivers are specialized, high-quality tools used in racing to install wheel hub seals perfectly straight and without damage. This ensures low-friction, low-drag operation for maximum speed, and they often feature interchangeable heads for different seal sizes, saving money on wasted seals and improving performance. DRP Performance products focus on racing components that reduce friction, like these drivers and their low-drag PTFE hub seals, to help cars roll easier and go faster on the track. * What they are: -- Billet aluminum tools with interchangeable heads designed to drive (install) various types of hub seals. -- Used in Circle Track, short track, and other racing series for installing low-drag seals and bearings. Key features and benefits: * Damage prevention: Prevents bent or damaged seals, saving money and time * Precision installation: Ensures seals are driven in perfectly straight for optimal performance * Low friction: Used with DRP's ultra-low drag seals (often PTFE) to minimize rotational drag, putting more horsepower to the track * Reusable: Made as durable, lifetime tools * How the seal drivers work with DRP seals: -- DRP Performance also makes special hub seals with lightweight aluminum housings and full PTFE lips that create very low resistance -- Using the Seal Driver ensures low-drag seals are installed correctly to maintain their performance advantage over standard seals, which is crucial for reducing heat and drag in high-RPM racing bearings

Not Yet Reviewed

$62.84

Summit Bucks

Denso Remanufactured Air Conditioning Compressors

Denso remanufactured air conditioning compressors are built to meet their unsurpassed reputation for technological superiority. Each unit goes through a rigorous remanufacturing process to meet Denso's strict quality standards. If a part does not meet their stringent specifications, it is replaced with a factory-new component. Plus, almost all Denso remanufactured compressors are coreless, so you don't have to worry about handling cores and added costs. As always, these units are built right the first time, so they last longer and perform better. Additional features of Denso remanufactured air conditioning compressors include: * Denso First Time Fit provides the right part and the right fit ... the first time, every time * Snap rings improve performance under extreme heat * Thrust bearings built to withstand tension and stress for maximum durability * Valves and shafts designed with lightweight aluminum alloy for added strength * OE-specified O-rings and seals compatible with both R12 and R134a refrigerants * Factory O-ring installation kits prevent leakage and ensure proper installation * PTFE surface-treated pistons for smooth, efficient operation * Lightweight aluminum alloy swash plates for added strength

Not Yet Reviewed

$340.99

Summit Bucks

Valair Performance Quiet Street Dual Disc Clutch Kits

Diesel trucks are designed for towing heavy loads. If your rig is running 500 to 650 hp, then Valair Performance Quiet Street Dual Disc clutch kits are the way to tow. They feature tough heavy-duty parts, strong pressure plates, and a nodular iron flywheel. These kits are not intended for racing or competition use. Quiet clutch kits eliminate floater plate rattle when the clutch is pressed in, but gear rollover noise is inevitable when changing to a solid mass flywheel. It's often heard when the vehicle is under load at low rpm or idling, and it sounds like marbles in the transmission. Please educate yourself before purchase. Towing is tough on your vehicle—keep the pressure high and the shifts solid with a Valair Performance Quiet Street Dual Disc clutch kit, available for a variety of specific transmission applications.

4.56 out of 5 stars ( 9 )

$1,345.03

—

$1,631.58

Summit Bucks

Ridetech Strongarms Tubular Control Arms

Ridetech Strongarm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of Ridetech Strongarm tubular control arms; order the kit recommended for your vehicle.

4.61 out of 5 stars ( 18 )

$295.00