Availability
Shop limited-time discounts on parts, tools, and accessories from your favorite brands!
Shop limited-time discounts on parts, tools, and accessories from your favorite brands!
Shop limited-time discounts on parts, tools, and accessories from your favorite brands!
On Sale
Vortech supercharger systems for GM LS-Swaps operate at an even higher level of sophistication than any original equipment system. They're currently one of the most popular engine swap power plants in the world. In every application, the LS systems have established themselves to be fantastic platforms to swap into just about anything. They operate at an even higher level of sophistication, with a boost curve generated by Vortech's superchargers that are ideally matched with today's highly evolved engines and give you power when you need it. The supercharger and the technologically advanced subsystems fully integrate into the vehicle's existing platform, yielding a smooth continuity of power and performance.
( 3 )
$3,915.99
—
$6,935.99
$3,524.39
—
$6,242.39
On Sale
Hooker LS swap exhaust system intermediate pipes provide bolt-in compatibility with Hooker LS swap exhaust manifolds (2nd Gens only), headers, engine mounting brackets, and transmission crossmembers specifically designed for this vehicle application. They are manufactured from highly durable stainless steel and include the necessary mounting gaskets and hardware to complete the installation. The pipes will help to decrease your total swap installation effort and cost, while increasing the engineered quality of your vehicle.
( 17 )
$102.95
$66.95
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$99.95
—
$603.95
$87.95
—
$448.95
On Sale
Doug's Headers offers LS Swap exhaust systems for a wide range of vehicles, including many Chevy, Buick, Oldsmobile, Pontiac, and GMC models from the 1960s and '70s. They feature mandrel-bent 304 stainless steel for maximum flow and long-lasting durability. Each system contains a stainless muffler and H-pipe or X-pipe design for a true muscle car sound. These exhausts tuck up tight with the Doug's transmission crossmember for maximum ground clearance. All brackets and hardware are included for a true bolt-on installation; and the exhausts are compatible with Doug's LS Swap headers. Order the system recommended for fitment on your vehicle.
( 1 )
$1,071.60
—
$1,209.00
$964.44
—
$1,088.10
On Sale
At the "heart" of any performance vehicle is the exhaust system. Hooker Blackheart LS swap exhaust systems are engineered to provide maximum exhaust velocity, ground clearance, style, performance, and quality. These Blackheart LS systems are offered in three different configurations, and bolt-up directly to existing Hooker Blackheart mid-length headers (sold separately) for a hassle-free installation with an impressive sound sure to turn heads! Features and benefits include: * Constructed from lightweight, 18-gauge, mandrel-bent 409 stainless steel for maximum strength and durability * Dual 409 stainless steel high-flow, straight-through muffler design * Available in three different configurations: Dual 3 in. inlet/single 3 in. out, dual 3 in. with turndowns, or dual 3 in. inlet/dual 2.5 in. out (rear exit) * 100 percent quality hand-welded construction for strength, longevity, and good looks * Designed for use with other Blackheart S10/Sonoma LS swap products * Utilizes OEM mounting points for factory-like fitment * Tube geometry designed for maximum clearance and hassle-free installation * All hardware included
( 1 )
$628.95
—
$699.95
$565.95
—
$628.95
On Sale
Holley offers LS swap 4WD truck off-road oil pan baffles for a variety of trucks, including many Chevy and GMC models from the 1970s and '80s. They take Holley's popular cast aluminum oil pans (P/N 302-4 and 302-4BK) designed to swap LS engines into K10s and other trucks to a whole new level. Vehicles that endure prolonged sessions of climbing, crawling, braking, turning, and accelerating need extra protection from oil starvation. That's where these baffle kits come in. They improve upon the baffle included with those pans, maintain proper oil level at the oil pump pick-up during vehicle elevation and grade changes, accelerations, both lateral and linear, and braking. This prevents loss of engine oil pressure during off-road excursions as well as during hard acceleration. Each baffle is fabricated from sheet aluminum joined by TIG-welded joints. Directionally positioned one-way trap doors allow oil flow toward the oil pump pick-up but not away. These direct bolt-in baffles are designed to be used in the Holley P/N 302-4 and 302-4BK LS Swap oil pan with the standard pickup, and are a drop-in replacement for the standard tray baffle. They're great for street, race, and off-road applications.
Not Yet Reviewed
$217.95
$141.95
On Sale
Holley offers LS swap 4WD truck off-road oil pan rock shields for a variety of trucks, including many Chevrolet and GMC models from the 1970s and '80s. They take Holley's popular cast aluminum oil pans (P/Ns 302-4, 302-4BK, 302-24, and 302-24BK) designed to swap LS and LT engines into K10s and other trucks to the next level. Vehicles that are actually going to be taken off-road need additional protection. That's where these rock shields come in. This extra protection is for those wanting to go above and beyond the already tougher cast pan and protect the most important system in the engine bay. Additional product notes: * Couple with a 302-33 (LS) or 302-34 (LT) hinged-door baffle kit to make your vehicle's oiling system as bulletproof as possible * Direct bolt-on to 302-4 / 302-4BK Holley LS and 302-24 / 302-24BK Holley LT Swap off-road oil pans * Great for street, race, and off-road applications * Protects oil pan and filter from debris, rocks, and other potential hazards * Does not require dropping the pan to install
Not Yet Reviewed
$143.95
$79.95
On Sale
Generation III and IV small blocks are perhaps the most popular LSx engines for swapping--and the powerful GM V8s require equally effective fuel delivery. Summit Racing™ universal LS-style fuel systems incorporate both the fuel filter and regulator into one efficient, affordable unit. These 255 lph fuel pumps channel a precise 58 psi of juice to the "dead head" fuel rails inlet, returning any excess from the filter back to your tank. It's a system very similar to those used in factory LS performance cars, a simple fuel solution for car and truck owners who jettison their stock powerplant for a coveted LS. Summit Racing™ universal LS-style fuel systems also include 20 ft. of braided fuel line, as well as -6 AN inlet and outlet fittings in a black or blue anodized finish. (The kits are intended for use with a fuel cell or modified/aftermarket tank with AN outlets and returns.) Summit Racing™ also offers the filter and fittings in a smaller kit for those who don't need the entire system.
( 6 )
$312.37
—
$340.81
$311.25
—
$338.61
On Sale
Hooker Super Competition engine swap transmission mount kits are available for Chevy, Chrysler, and Ford small block and big block engines. These strong mounts are designed from steel and are engineered to provide you with an exact fit and a simple installation. Hooker Super Competition engine swap mount kits are the mounts of choice when matched with the appropriate engine swap.
( 11 )
$449.95
$403.95
On Sale
Now available from Holley are LS engine swap accessory drive systems. Included are accessories and pulleys that are manufactured by OEM part suppliers for durability and direct bolt-on installation. Order the kit that's best suited for your vehicle and engine application. Features and facts: * Universal brackets fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets--thus reducing cost and complexity compared with competitive products * Simple, dedicated installation kits allow easy fitment to Corvette, F-Body, or truck drive offsets * Accessories, tensioner, and pulleys are manufactured by OEM suppliers and many of the parts are used on production vehicles today
( 34 )
$849.95
—
$2,749.95
$763.95
—
$2,023.95
On Sale
Vehicles that endure prolonged sessions of braking, turning, and accelerating need extra protection from oil starvation. That's where Holley retrofit oil pan baffle kits for the GM LS engines come in handy. They are designed to maintain proper oil level at the oil pump pickup during vehicle accelerations, both lateral and linear. The baffle maintains the oil at the oil pump pickup preventing loss of engine oil pressure during maximum cornering in a high performance touring or road racing, as well as under hard acceleration in drag racing vehicles. The baffle is fabricated from sheet aluminum joined by TIG-welded joints. Directionally positioned one-way trap doors allow oil flow towards the oil pump pickup but not away.
( 4 )
$349.95
—
$380.95
$314.95
—
$342.85
On Sale
Add more cubic inches and power to your vehicle with the help of Hooker Blackheart engine swap mount kits. The kits are available for most popular models of cars and trucks with a variety of popular engine sizes. They include all of the components you'll need, at a cost that won't break your budget.
( 69 )
$159.95
—
$330.95
$87.95
—
$269.95
On Sale
FiTech Plus LS Swap oil pans are for use in common stroker LS swapped applications where chassis clearance concerns are not a critical issue. These pans will fit most GM rear wheel drive vehicles that were originally equipped with a small block or big block Chevy engine and traditional rear sump pan. The units feature high-quality cast aluminum construction with clean exterior styling in three finish options. They're offered in standard, medium, and ultra-low profile models. Each complete kit also includes a sump baffle, pick-up tube, sump plug, oil filter stud, and oil passage cover. FiTech Plus LS Swap oil pans are available for a wide range of cars and trucks, including many Chevrolet, Buick, GMC, Oldsmobile, Pontiac, Ford, and Mercury models from 1960 and up. Select the size and style recommended for your ride.
Not Yet Reviewed
$419.00
—
$479.00
$356.15
—
$407.15
On Sale
Summit Racing™ Pro LS camshaft and spring kits are designed for GM LS engines. Each cam kit offers a budget-friendly option without sacrificing quality and performance. They're available in Stage 1 or 2 performance configurations. Stage 1 kits include the cam and matching drop in beehive springs with seals or optional upgraded dual spring and retainer kit. Stage 2 kits give you an additional cam change gasket kit and a crank bolt. Order the Summit Racing™ Pro LS camshaft kit recommended for your year/make and engine application.
( 37 )
$584.96
—
$766.95
$534.96
—
$716.95
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$367.95
—
$399.95
$208.95
—
$342.85
On Sale
Now you don't have to run a cumbersome roots-style supercharger on your vintage muscle. Vortech's carbureted centrifugal supercharger kits are designed to bring the performance and compact fit associated with late model fuel injected kits to vehicles equipped with carbureted engines. In most cases, these kits will fit under your stock hood without modifications. The heart of each kit is either a gear-driven V-1 S-Trim head unit or a gear-driven V-7 YSi-Trim head unit, unless otherwise noted. The cast aluminum carburetor enclosure assembly pressurizes the float bowls and throttle shafts for seamless response, and is designed for use with Holley 4150 or Demon 750 MD carburetors. The enclosure features front and rear -8 AN fuel inlet ports as well as provisions for pressure and vacuum connections. Linkage arms, a splined shaft, left/right hand spherical rod ends, and carburetor studs are included for simple throttle connection and adjustment. The included oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger. They also feature a 6061-T6 billet aluminum supercharger crank pulley, pulley spacer, and an automatic belt tensioner.
( 1 )
$4,319.99
$3,887.99
On Sale
Make your GM LS engine "swap ready" with an Intellitronix engine swap kit that comes with the required brass gauge adapter fittings needed for doing it. Kit components: * One bushing 1/8 in. NPT to 12mm for water temperature sender * One bushing 1/8 in. NPT to 16mm for oil pressure sender * One resistor for tachometer connection
( 7 )
$20.69
$18.62
On Sale
Vortech has a wide variety of supercharger kits available for many electronic fuel injected cars, trucks, and SUVs. Vortech kits come complete with everything that you need to install some serious horsepower. All systems come with the required fuel management components and a fuel pump, depending on the application. Also, all required hardware comes with the kits, including hoses, OEM connectors, ducts, fasteners, and tie wraps. Of course, the kits include complete instructions with plenty of diagrams, graphics, and photos to make your installation easy.
Not Yet Reviewed
$5,561.99
—
$7,282.99
$5,005.79
—
$6,554.69
On Sale
UMI's LS to LT conversion engine swap mount brackets adapt the modern GM LT direct injection engine to UMI's popular GM LS (Gen III / IV) engine mount system. The brackets are designed to maintain factory crankshaft and bellhousing location. This bracket kit includes driver and passenger side adapters, as well as high-quality installation hardware. Product features: * CNC-machined 6061 T6 billet aluminum construction * Anodized for protection * Pairs nicely with UMI 2328, 2329 or GM 22179268 mounts * Installation hardware included
Not Yet Reviewed
$59.99
$53.99
On Sale
Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 190 )
$642.54
—
$816.54
$592.54
—
$766.54
On Sale
Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.
( 237 )
$840.00
—
$997.00
$756.00
—
$897.30
On Sale
Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 750 hp EFI short LS3 port intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 750 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 55 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 340 or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.
Not Yet Reviewed
$2,293.99
—
$3,033.99
$1,835.19
—
$2,427.19
On Sale
Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 500 hp EFI short LS7 port intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 500 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 92mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 36 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 255, 340, or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.
Not Yet Reviewed
$2,093.99
—
$2,745.99
$1,675.19
—
$2,196.79
On Sale
Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 750 hp EFI short LS7 port intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 750 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 55 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 340 or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.
Not Yet Reviewed
$2,293.99
—
$2,745.99
$1,835.19
—
$2,196.79
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
