Availability
Shop limited-time discounts on parts, tools, and accessories from your favorite brands!
Shop limited-time discounts on parts, tools, and accessories from your favorite brands!
Shop limited-time discounts on parts, tools, and accessories from your favorite brands!
Showing In Stock Items. Show All Items.
On Sale
Edelbrock's Performer carburetors feature 2-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves—and the primary venturi booster is a bottom-feed design for smoother acceleration and better drivability. An Owner's Manual is included with every Edelbrock carburetor. The manuals consist of two sections: Section 1, Theory of Operation and tuning procedures which will help you be prepared to develop your own individualized calibration. Section 2, Tuning procedures will take you through a step-by-step procedure that will enable you to achieve a desirable calibration. For added ease of tuning, a Calibration reference chart for your model of carburetor is also included. Performer carburetors are available with a variety of options; select the model that best suits your needs.
( 1471 )
$414.95
—
$590.95
$373.46
—
$531.86
On Sale
Edelbrock AVS2 Series carburetors are the next generation of carburetors. Featuring annular flow primary boosters, adjustable secondary air valves, and a new calibration, these AVS2 carburetors offer improved idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered when the carburetor transitions from idle to full throttle. Each annular booster features eight, equally spaced orifices to improve fuel metering. The improved flow metering makes this carburetor ideal for use with a wide variety of small-block and big-block engines with either dual- or single-plane intake manifolds.
( 831 )
$428.95
—
$619.95
$386.06
—
$557.96
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 29 )
$1,249.95
—
$1,499.95
$1,123.95
—
$1,348.95
On Sale
Summit Racing™ Performance LS7 hydraulic roller lifters are a definite upgrade over stock originals. Designed for high horsepower engines that demand increased oiling and higher-rpm capabilities, these replacement lifters will fit in SBC roller engines, as well as LS-based engines without active fuel management (AFM/DOD). Beat the competition to the finish line with Summit Racing™ Performance LS7 hydraulic lifters!
( 19 )
$207.99
$204.99
On Sale
Advance with the digital power of your popular favorite--MSD 6AL ignitions. With less power draw and higher output, MSD moves you with "the fire to drive" in a digital powerhouse! Inside microprocessors, updated circuits and efficient components monitor and handle every firing and rev limit to produce more power while pulling less current. Don't worry; features that made their 6AL boxes your first choice remain but with improved output--more than135mJ of spark energy for every firing with 530+ volts to the coil! And, to go with the new power, a new look. These digital 6AL ignition controllers are sleek with a lower profile. Wiring is routed out one end through a sealed and locked connector and two rotary dials to set rpm limit are positioned right on top--easier installation, super easy access and a clean, neat appearance under the hood. Controllers are supplied with wiring harness and components you need for install plus, vibration mounts. Increased output and proven multiple-spark power--MSD digital 6AL ignition controllers are a definite win-win!
( 428 )
$339.95
—
$344.95
$305.95
—
$310.45
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 104 )
$1,599.95
—
$4,599.95
$879.95
—
$4,138.95
On Sale
Summit Racing™ LS lifter and guide kits offer top-quality, precision-made pieces at an excellent value! These kits include a set of roller lifters, lifter guide bolts, and LS2 lifter guides.
( 41 )
$244.98
$241.98
On Sale
The Street Warrior uses the latest technology and quality products that Holley is known for. Constructed from aluminum, the Street Warrior is a great replacement carburetor for your daily driver or your weekend cruiser. Perfect replacement carburetor when your original style is no longer available.
( 404 )
$480.95
—
$499.95
$431.95
—
$448.95
On Sale
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 89 )
$1,789.95
—
$2,499.95
$1,609.95
—
$2,248.95
On Sale
When your expensive engine, sponsorship, and reputation are on the line, trust your engine monitoring to Holley EFI 12.3 in. Pro Dash touch screens. Completely customizable for use in a variety of motorsports applications, they feature 12.3 in. 1280 x 480 resolution low-glare, high-brightness, high-contrast, full-color capacitive touch screens that are easy to view--even in full sun. They offer plug-and-play connection to most Holley EFI systems, and weather-resistant aluminum housings featuring flexible mounting options. Monitor the power of your Holley EFI system at a glance with Pro Dash touch screens. Features: * Real-time ECU tuning allows you to make quick tune changes, without needing to hook up a laptop * Capable of monitoring up to 238 real-time values such as rpm/TPS/boost * 16 default background skins pre-loaded with unlimited options for importing custom layouts * Quickly swipe between multiple active screens (tune, warm-up, race, drive, etc.) * Virtual switch panel eliminates the need for external toggle switches * Manual or auto-brightness features for easy viewing day or night * Built-in GPS with odometer function (antenna included) * On-screen datalog playback features allows you to review vital run information * Expandable storage via USB * No stylus required, capacitive touch, just like your smart phone * User definable channel alarms and warnings * Six 1/4 in.-28 mounting holes for surface or flush mounting with high-quality hardware * USB keyboard and mouse functionality makes it quick and easy to setup new layouts * 34-pin wiring harness contains power, ground, and CANbus connections * Input and output functionality for 13 multi-configurable inputs, and 4 ground switched outputs * User defined alarms for any input * Upgradable with future software enhancements * Viewing area is 12.3 in. on the diagonal, 11.5 in. wide by 4.25 in. tall * Dash weight is 3.29 lbs. * Plug-and-play programmable shift light
( 8 )
$2,049.95
$1,843.95
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 17 )
$1,749.95
—
$2,549.95
$1,573.95
—
$2,293.95
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 24 )
$1,649.95
—
$1,899.95
$1,483.95
—
$1,708.95
On Sale
For fast response times, AEM X-Series wideband UEGO air/fuel sensor controller gauges are a great option! Built on the unique, patent-pending X-Digital technology, they report accurate information quickly— enabling you to tune your engine more efficiently. These gauges have modern, visually striking faceplates with 7-segment center displays that are 87 percent larger. They're ultra-slim and come with black bezels and black dual-faced faceplates for air/fuel and Lambda. The displays are user-configurable and feature auto-dimming. Additional features: * Bosch 4.9LSU wideband UEGO sensor * Factory-calibrated resistor does not require free-air calibration—but technology allows for free-air calibration as sensor ages, if user desires * Compatible with vehicle/system voltages up to 16 V * 0-5 V and RS232 output for data-logging and feedback control * AEMnet (CANbus) for data-logging and daisy-chaining multiple controllers up to 16 cylinders * Can display AFR values in hundredths of a percent * 52mm gauge diameter and slim 0.825 in. gauge depth * Gauge cup depth only .200 in. deep * Locking connectors
( 210 )
$160.95
—
$279.95
$144.85
—
$251.95
On Sale
Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential
( 6 )
$2,349.95
—
$3,399.95
$2,113.95
—
$3,058.95
On Sale
XS Power AGM batteries are some of the lightest racing batteries on the market. Independent test results have proven that they outperform other battery models that outweigh these power providers by up to 20 lbs. Cutting-edge lead acid battery technology produces more energy in a smaller space because each cell is compressed before case insertion, resulting in efficient power-producing packages that are completely sealed with no need to ever add water. This design is ideal for the abuse of racing, making these the batteries of choice for demanding racers and Monster Truck drivers who need top performance and reliability. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power AGM batteries best suited for your application. Product features include: * Designed to be an inch shorter than what the competition offers for fitting in places where space is at a premium * Deep-cycling ability and ultra-low internal resistance results in high cranking amps and excellent vibration resistance * Variable position mounting (except upside-down) thanks to the no-spill design * Offered in 6 V, 12 V, 14 V, and 16 V models
( 272 )
$119.99
—
$699.99
$110.39
—
$629.99
On Sale
Everyone loves the look of classic sealed beam headlights, but the dim halogen light output makes nighttime driving a potentially risky endeavor for you and your beloved classic. Holley's new RetroBright LED headlights offer a number of advantages over traditional sealed beam headlights, such as plug-and-play compatibility, better visibility, and 6x longer life. Not only that, but because they are LED, the lights take up less space, create far less heat, and use less power than other headlights. The low-profile housing design fits most shallow headlight buckets found on classic cars without the hassle of cutting or drilling. Holley worked closely with Morimoto, a leader in lighting design, to develop its lineup of lighting solutions that boast a classic look with modern lighting technology. A special PWM LED driver resides inside of the headlight to keep the LEDs running at their peak intensity, even during prolonged periods of use. For example, the 7 in. round LED produces 32,000 Candela for low beam, and 53,000 Candela for high beam, which is nearly three times more light output than your original headlights. RetroBright has offerings to fit most classic and modern vehicles that utilize the popular 5.75 in. round, 7 in. round, 4 in. x 6 in. rectangular, and 5 in. x 7 in. rectangular headlight housings. They're available in 3000 Kelvin and 5700 Kelvin color temperatures, depending on whether you're looking for that classic lighting hue or want an even brighter, more modern look. And if your vehicle feels more at home across the pond, Holley also offer headlights with yellow lenses for that European flair. Additional details: * Plug-and-Play: Plugs into factory headlight harness for easy installation * Classic Styling: Retro styled headlight for period correct appearance * Superior: Over 2x the light output of halogens to keep you and your classic safe * Low Draw/Extended Life: Less current draw and 6x the life of halogen sealed beams * Compliant: No-glare beam pattern meets or exceeds SAE and DOT requirements * Serviceable: Replaceable LED cartridges for easy serviceability * Proper Fitment: Engineered to fit most shallow light buckets found on classic vehicles * Stronger: UV-treated polycarbonate lens won't shatter and is 10x stronger than glass or standard plastic * Compatible: Sealed Beam Trade Numbers: H5054, H6052, H6054 * Color Choice: Available in "Classic White" (3000K bulb) for a warm classic hue, "Modern White" (5700K bulb) for a cleaner modern look, or a Yellow Lens (utilizes 5700K bulb inside)
( 152 )
$149.95
—
$249.95
$82.95
—
$224.95
On Sale
Holley EFI 6.86 in. Pro Dash touch screens deliver over 200 monitoring channels of reliable real-time data in a more compact, full HD package suitable for nearly any motorsports application. Be assured that they will deliver the vitals you need! Pro Dash units are completely customizable for use in a variety of motorsports applications with a 6.86 in. 1280 x 480 resolution, low-glare, high-brightness, high-contrast, full-color capacitive touch screen that's easy to view--even in sun. They offer plug-and-play connection to most Holley EFI systems, as well as weather-resistant aluminum housings featuring flexible mounting options. Monitor the power of your Holley EFI system at a glance with Pro Dash touch screens. Features: * Plug-and-play display support for Dominator, HP, Terminator X, and generation 1 Sniper EFI * Integrated a 10 LED programmable shift light with 4 LED warning indicators for other sensor inputs. * Capable of monitoring up to 238 real-time values such as rpm/TPS/boost * 10 default background skins pre-loaded with unlimited options for importing custom layouts * Quickly swipe between multiple active screens (tune, warm-up, race, drive, etc.) * Virtual switch panel eliminates the need for external toggle switches * Manual or auto-brightness features for easy viewing day or night * Built-in GPS with odometer function (antenna included) * On-screen datalog playback features allow you to review vital run information * Expandable storage via USB * No stylus required, capacitive touch, just like your smart phone * User definable channel alarms and warnings * Four 10-32 mounting holes for surface or flush mounting with high-quality hardware * USB keyboard and mouse functionality makes it quick and easy to setup new layouts * Includes 34-pin wiring harness contains power, ground, and CANbus connections * Input and output functionality for 13 multi-configurable inputs, and four ground switched outputs * User defined alarms for any input * Upgradable with future software enhancements * Viewing area is 6.86 in. on the diagonal * Dash weight is 1.2 lbs. * Real-time ECU tuning--HP/Dominator ECUs only
( 18 )
$1,249.95
$1,123.95
On Sale
Airflow Research developed these 185cc SBF Enforcer cylinder heads for maximum small block Ford performance. They're manufactured from tough but lightweight A356 aluminum and feature 185cc intake runners and 64cc combustion chambers. Enforcer heads feature a 0.325 in. deck, stock valve locations, and are designed for blocks with a minimum bore of 4.000 in. The heads are available bare or fully assembled with stud mount rocker mounting.
( 21 )
$767.55
$690.80
On Sale
MSD ignition controls are the most successful aftermarket ignitions ever made. The multiple spark design has won races and championships in every type of motorsport. MSD ignitions are consistent, reliable and durable, even under extremely harsh conditions. The results speak for themselves--more power, easier starting, quicker throttle response, smooth idle, and improved fuel consumption.
( 37 )
$549.95
$493.95
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 57 )
$204.99
—
$379.99
$199.99
—
$339.99
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$227.95
—
$652.95
$205.16
—
$522.36
On Sale
Help your fuel injection system keep up on measured pressures with these Holley replacement pressure transducers. They include a wiring pigtail, are available for all Holley EFI fuel injection systems, and come in different pressure ranges to suit your engine application requirements.
( 48 )
$149.95
—
$212.95
$134.95
—
$191.65
On Sale
SCT X4 Power Flash programmers arrive to you pre-loaded with dyno-proven tune files for select vehicles, to unlock your vehicle's hidden potential! Programming your vehicle with one of SCT's pre-loaded tune files is as easy as 1-2-3. Simply plug the OBD-II connector into vehicle's OBD-II port, select the pre-loaded tune files using the simple to navigate menu and in minutes the X4 programs your vehicle for your particular driving style. Additional features and facts about SCT X4 Power Flash programmers include: * Stores up to 10 custom tune files * Full color LCD display * High-speed data logging/monitoring * Reads/clears DTC trouble codes * Dual analog inputs * Most popular vehicles supported * Installs quickly and easily * Easy restoration back to stock * User adjustable vehicle parameters * USB Interface cable included
( 98 )
$399.00
—
$699.00
$314.99
—
$539.10
On Sale
Holley Model 4150 aluminum Double Pumper carburetors offer an improved fuel design and efficient construction features for huge 38 percent weight savings over standard carbs. Optimized for street and strip calibration, they provide great performance right out of the box. Holley carburetors include dual accelerator pumps, mechanical secondaries, and dual-feed inlets for constant high-volume fuel delivery. Plus, with power-valve blowout protection and a 100 percent wet-flow test, these units set a standard for performance and reliability that's hard to beat. An attractive tumble polished finish is icing on the cake. Choose the Holley Model 4150 aluminum carburetor for your particular make and model.
( 36 )
$699.95
—
$749.95
$628.95
—
$673.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
