Availability
On Sale
Continuing the line of Trail-Link kits is the Trail-Gear Trail-Link 3-link Series of Tacoma Solid Axle Swap (SAS) kits that are strong, user friendly, and affordable. They offer several different kits to allow you to pick the kit that is best suited and priced for your unique build. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners, for Tacoma owners, if you have any questions, you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Trail-Link Tacoma Solid Axle Swap SAS "C" kits: * Trail-Gear shock mount kit * Lower link mount--2 in. x .250 in. wall DOM tubing * Upper axle link bracket--1/4in. steel, formed and welded * Panhard brackets--3/16 in. thick * Driver-side front frame bracket--1/4in. steel, formed and welded * Passenger-side front frame bracket--1/4in. steel, formed and welded * Panhard bar--1.25 in. x .250 in. thick wall DOM material * Three RH and LH 1.25 in. Creeper Joints with bungs * Two rod ends with bungs * Misalignment spacers * Shock straps * Link * 3-hole gussets * Front frame reinforcement plates (with IFS box mount kit) * Steering shaft * Steering couplers * Firewall plate * Front extended brake line * Fully loaded calipers * Caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * Tacoma high-steer kit * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
$6,799.99
On Sale
Spicer Drivetrain Ultimate Dana 60 crate axle assemblies upgrade your axles for even better performance over rocks, across sand, and through mud. They incorporate many innovations to deliver optimal performance for your Jeep right from the start. Stronger axle shafts, higher torque loads, and rock-solid seals for peak protection, give you the Dana advantage to tackle the extreme punishment of off-roading. Spicer Dana 60 advantages: * Spicer 35 spline SAE-4340 nickel chromoly steel axle shafts * High-strength, heavy-gauge brackets * Available with either an Eaton ELocker or ARB AirLocker * Heavy-duty 8 x 6.5 in. wheel bolt pattern * Nodular iron diff cover with protective ribbing * Spicer 1350 strap-style/half-round end yoke * Upgraded heavy-duty brakes with plug-and-play ABS system Front axle assemblies: * Massive Spicer SPL-70 U-joints—exclusive to Dana * Warn 35-spline hub locks * Spicer 10 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.370 in. wall thickness Rear axle assemblies: * Spicer 9.75 in. ring and pinion gear inside * Axle tubes: 3.5 in. tube diameter/.390 in. wall thickness
Not Yet Reviewed
$8,499.99
—
$9,979.99
$7,649.99
—
$9,480.99
On Sale
Bell Racing HP77 High Performance Series helmets are based on Bell's highly successful and multiple F1 World Champion-proven HP7 design. Chosen by most top professional open cockpit racers, the HP77 provides advanced protection, featuring a very narrow eye port on top of which high-strength ballistic materials have been incorporated. Following a long tradition of innovation, the HP77s were the first helmets to meet the latest FIA8860-2018-ABP standard, the most rigorous sport helmet standard on the planet designed for professional Formula racers competing at the highest levels of the sport. Bell's HP77 High Performance helmets are known for their lightweight, aerodynamic qualities, superior cooling, and amazing defogging system that meets the intense demands of open cockpit racing in all types of weather. Available in several sizes, select your ideal fit. Features: * Full face helmet featuring high-strength and high-modulus carbon fibers creating an ultra-lightweight FIA8860-2018 ABP shell * Very narrow eye port * Frontal area with integrated ballistic materials for added protection from flying debris * Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance * Optical grade injected Double Screen Anti-Fog (DSAF) shield for anti-fog control and superior visibility * Powerful and effective top and chin bar ventilation system with 12 air intake and extraction channels for maximum ventilation * Air intake system includes 2-part center and low profile on sides (installed) * Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities * Integrated channels in face piece offering multiple options to install drink tube and communication systems * Factory installed Hans anchors as original equipment * Synthetic rubber gasket seal to prevent dirt and water from entering the helmet * HP helmet bag included * Shield and pivot kit
Not Yet Reviewed
$5,599.95
$5,039.96
On Sale
BendPak's HDS-Truck Series 4-post lifts are a whole new breed of rugged lifts. They're newly engineered super-duty truck lifts that make light work out of heavy lifting. They work better, are built to last, and feature upgrades that increase safety, durability, and productivity. Each BendPak HDS-Truck Series 4-post lift is equipped with a single hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements. The hydraulic cylinder features high-Durometer rod seals, pressure-loaded U-cup piston seals, backups, and wear bands that virtually eliminate any fluid bypass. The welded cylinder body is made from high-strength steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures straight, smooth cylinders that will provide years and years of dependable, trouble-free service. Additional features include the following: * 40,000 lb. lifting capacity * Super-sized 12 in. diameter cable sheaves * Stainless steel lifting cables * Extended length runways * Grease nipples * Single hydraulic under-runway cylinder * Durable powder coat * Spring-loaded safety locks * Second lock system on constant guard * Fully enclosed lifting cables * Multiple adjustable height-locking positions * Maintenance-free electric hydraulic power system * Conveniently positioned operator controls * 12 in. x 12 in. base plates * Non-skid runways
Not Yet Reviewed
$35,995.00
$34,295.00
On Sale
BendPak 10APX Pro Series 2-post lifts are designed for mechanics who constantly deal with working in uncomfortable positions on the job. They offer a lifting height of 79.5 in. and an overhead beam of 157 in., providing ample room to work comfortably with top-tier equipment. Like the rest of the Pro Series, these powerful units feature a 10,000 lb. lifting capacity, Low-Pro arms, Bi-Metric arms, and more. Pro Series two-post lifts boast a revolutionary design that combines the finest qualities of today's lifts into a new car lift engineering concept. The result is a lift unlike any other, purposefully designed for extreme use, high loads, and unmatched operator safety and efficiency. * Experience the ultimate convenience with the Pro Series, offering both wide and narrow installation options in one customizable package. * Built to last, these versatile lifts ensure durability, safety, and reliability for all your automotive needs. * Improved under-car access thanks to the low-profile arms and extra-wide column spacing. Critical load-holding components are crafted from high tensile-strength steels, allowing greater telescoping movement in swing arms and tube profiles tailored for low ground clearance vehicles and outer-positioned EV lifting points. * Electric vehicles require specialized lifts to safely manage their increased weight from added batteries, reinforced frameworks, suspension systems, and protective metal armor. The Pro Series is designed to meet these demands with reinforced construction and purposefully engineered features, making it the perfect solution for EV service. * The Pro Series boasts a revolutionary Automatic Swing Arm Restraint System (ASARS), designed specifically for heavy vehicle service, setting a new standard in the industry. Engineered to withstand the rigorous pushing and pulling forces encountered during servicing, this system features a complete 360-degree load-holding grip. Its heavily forged-steel design delivers over 2,000 pounds of load-holding force, ensuring secure arm placement and preventing unintended movement during lift use and vehicle servicing. * The Pro Series also introduces revolutionary and patented swing arms tailored for accommodating a wide variety of vehicle lifting points. Unlike traditional lift arms, Pro Series arms retract shorter and extend farther, providing lift operators with extensive positioning options. * BendPak's exclusive Low-Pro swing arms incorporate telescoping channels with a lowered profile and dropped-end pad receivers. This design facilitates easier access to lift points on lowered chassis-height vehicles, reducing the risk of damage to vehicle side skirts, running boards, or ground effects. * The Bi-Metric adaptable swing arms are another exclusive feature, allowing users to load vehicles symmetrically or asymmetrically without needing to switch arms. * When it comes to lifting full-sized trucks or SUVs onto a two-post lift, you can't cut corners. Reduce your risks with BendPak's Frame Cradle Pads, ensuring your vehicle stays securely in place during every lift operation. The heavy-duty steel and thick polyurethane rubber pad lining provide durability and protection. * For even more functionality, you'll love the BendPak WSA-100 Work Station. This industrial-grade utility station integrates air and electric capabilities into your two-post or four-post lift seamlessly, boosting the efficiency of your shop—with four electrical outlets and two specialized air service outlets, one for lubricating air for tire inflation and another for clean air for pneumatic tools.
Not Yet Reviewed
$7,845.00
$7,445.00
On Sale
Trail-Gear is the first in the industry to develop a series of Tacoma Solid Axle Swap (SAS) kits that are complete, user friendly, and affordable. They offer several different Tacoma SAS kits to allow you to pick the kit that is best suited and priced for your unique build. Every Tacoma component in these Trail-Gear solid axle swap kits has been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With the full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners for Tacoma owners, if you have any questions you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Tacoma Solid Axle Swap SAS "C" kits: * Front spring hanger * All spring and shackle bushings * Shock hoops * 5125 Bilstein shocks * Frame tube jigs * Frame tubes * Shackle mount kit * Front frame reinforcement plates (with IFS box mount kit incorporated) * Steering shaft * Steering couplers * Fire wall plate * Bump stop kit * Heavy-duty front leaf springs * Front extended brake line * Fully loaded left and right calipers * Left and right caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * U-bolt flip kit * Tacoma high-steer kit (regular high-steer kit for 1979-85 solid front axles) * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Full color installation instructions * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled high-pinion 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
$6,799.99
On Sale
Spicer Driveline Ultimate Dana 44 AdvanTEK crate axle assemblies offer increased strength and durability in every facet—from thicker bracket mounts to upgraded materials to beefier housing tubes. Strength, versatility, bolt-in convenience, and a rock-solid history: it all comes together harmoniously in the Ultimate Dana 44 AdvanTEK crate axle assemblies from Spicer Driveline. Order the model with the ring and pinion ratio needed for your application. Spicer Ultimate Dana 44 AdvanTEK advantages: * Aggressive nodular iron differential cover * Heat-treated high-grade SAE-4340 chromoly steel axle shaft offers superior abrasion resistance and strength, as well as uniform surface * Thicker steel bracket mounts * Upgraded U-joints outperform the competition, with Nm load ratings of 3000 (1350 Series) and 3600 (1400 Series) * Thicker tubes for added strength * Custom high-clearance housing is designed to optimize extreme off-road performance * Expanded gear ratio options to accommodate different tire sizes * Genuine Spicer AdvanTEK ring and pinion gears for greater strength * Track width is identical to OE track width * No FAD (front axle disconnect) means increased strength * Selectable E-Locker
Not Yet Reviewed
$5,699.99
$5,129.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
