Availability
Showing In Stock Items. Show All 18 Items.
On Sale
If you require additional outputs and/or upgraded hardware over existing sensors, AEM Electronics MAP sensor kits will put a smile on your face. Their quality construction and precision accuracy make them a perfect choice for demanding performance applications.
( 12 )
$87.15
$56.65
On Sale
Summit Racing™ oxygen sensor extension harnesses are a must with full-length headers and other specific applications. These extension harness sets feature a direct plug-in design to eliminate the cutting and lengthening of oxygen sensor wires, along with high-temperature sleeving to help protect the wires from heat. They're available in a variety of plug styles, harness lengths, and other options. Order the pair recommended for your vehicle.
( 13 )
$61.99
$55.79
On Sale
AEM Electronics dual channel analog current sensors play a critical role in EV drive systems. Their job is to measure current in and out of the vehicle's high-voltage battery pack and report this data back to the VCU to be used for battery current limiting and management, as well as energy tracking. AEM dual channel hall-effect current sensors are offered in three amperages. Select the one needed for your application. Notes: * Dual Channel range ±75 amps for Channel 1 and: -- ±500 amps for Channel 2 -- ±750 amps for Channel 2 -- ±1000 amps for Channel 2 * Operating temperature range of -40 to 257 degrees F
Not Yet Reviewed
$118.95
$65.95
On Sale
The pressure inside your intake manifold is extremely important input to the ECU—so a quality MAP sensor from MSD is crucial to your engine's performance. These replacement sensors will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 to 5 V. They're available in several different versions for naturally aspirated engines, as well as engines with forced induction.
( 11 )
$179.95
$98.95
On Sale
AEM Electronics EGT thermocouples are economical and fast responding K-type thermocouples. They include a closed-tip TC sensor with a protective inconel sheath, 10 ft. extension wire, 1/8 in. NPT compression fitting, and ring and terminal harness. AEM EGT thermocouples are available individually or in 2- or 4-packs. Specs: * Maximum temperature: 1800 degrees F (982.2 degrees C) * Sheath length: 3 in./76.2mm * Sheath diameter: 0.125 in./3.18mm * Termination: Ring terminals * Wire length: 12 in. * Accuracy: Greater of 3.96 degrees F/2.2 degrees C or 0.75 percent
Not Yet Reviewed
$117.95
$64.95
On Sale
Classic Instruments tube-type fuel senders are designed to operate correctly with any classic fuel level gauge. They are available in multiple lengths to cover many automotive applications.
( 107 )
$132.95
—
$160.95
$73.95
—
$88.95
On Sale
Frostbite fan and shroud electric relay kits enable you to custom-configure your fans as pusher or puller types for increased cooling performance. Also, they provide a reduction in noise/vibration in your engine bay. Kit features: * Universal fitment for compatibility with all types of vehicles * Up to 40 amp draw capacity * Switch turns fans on at 185 degrees and off at 170 degrees * Can be installed on positive or negative grounded vehicles * Includes wiring harness, sensor, fuse, relay, and wiring terminals
( 4 )
$144.95
$94.95
On Sale
Racepak magnetic pick-up collars provide a mounting platform for up to eight magnets. This allows them to pick up driveshaft rpm faster than typical 2-magnet designs. Simply mount them on your rear-end yoke or coupler, then set up your sensor. They're available in several popular diameter sizes, and are perfect for automatic-equipped vehicles. Increase your data gathering efficiency with Racepak magnetic pick-up collars.
Not Yet Reviewed
$139.95
$90.95
On Sale
Know what gear you are in with Classic Instruments gear selector sending unit kits. These kits include a transmission-mounted sensor and interface module that works with Classic Instruments' gear selector gauges or individual LED indicator lights. Features: * Kit includes mounting hardware * Works with most 3- and 4-speed automatic transmissions * Easy push-button calibration * Also works as backup light trigger or neutral safety switch
( 4 )
$178.95
$98.95
On Sale
Holley LS valley covers are the latest accessories offered for the GM LS engine platform. These covers install between the two banks of cylinder heads, depending on your usage of knock sensors, displacement on demand, and active fuel management. They're available in a cast aluminum finned design to match Holley's popular valve covers, as well as a billet aluminum trussed version for a race-inspired look. The valley pan covers are offered in a variety of finishes.
( 2 )
$192.95
$106.95
On Sale
Cataclean fuel system cleaner is designed to reduce carbon buildup and clean your vehicle's catalytic converter, oxygen sensors, fuel injectors, and cylinder heads. It does not alter fuel composition—and is available in blends for gasoline, for diesel, and for hybrid engines. The cleaner has been tested at an independent emissions-testing facility and is shown to lower total hydrocarbon emissions by up to 50 percent! Cataclean fuel system cleaner can also be used to fix drivability issues, such as power reduction, hesitation, and hard starts, or as a pre-treatment before an emissions test, and even to extend the life of your vehicle.
( 6 )
$114.95
$74.95
On Sale
Mr. Gasket weatherproof connector kits contain an assortment of wiring components that are ideal for all high performance and racing wiring applications. The high-quality connectors and seals provide a reliable, OE-style wiring connection. These 232-piece kits offer a selection of 14 connectors with 1 to 4 terminals per connector, and crimp terminals and seals that work with 12-20 gauge wire. The connectors are compatible with those on most high performance electrical components (i.e. MSD Distributors, Holley distributors, EFI Systems, and many OE sensors and components). A plastic storage case keeps everything organized. What's in the box: * (5) 1-pin connectors (male and female) * (3) 2-pin Connectors (male and female) * (4) 3-pin connectors (male and female) * (2) 4-pin square connectors (male and female) * (2) 4-pin flat connectors (male and female) * (120) crimp terminals—male and female for 12-20 gauge wire * (80) seals for 12-20 gauge wire * Plastic storage case
( 1 )
$95.85
$52.72
On Sale
Hooker Blackheart "OBS" truck exhaust tips are constructed of 409 Grade stainless steel to match the exhaust systems they were designed for. Choose from stealth-exit tip kit or the rear-exit tips to complete the full Blackheart exhaust system that begins with cast stainless or cast iron exhaust manifolds. Finish it off with a Hooker adapter kit that makes it easy to incorporate a catalytic converter and already have bungs for oxygen sensors and Blackheart exhaust systems. Set contains two tips. Additional notes: * Easy 5-minute bolt-on installation (no welding required) * Choose from: -- 2.5 in. Stealth exit tips for a clean, hidden appearance -- 2.5 in. Rear exit tip kit brings the exit to the bumper for a clean visual appearance
Not Yet Reviewed
$131.95
$72.95
On Sale
MSD 6LS Ignition harness allow you to easily connect the 6LS-2 to a factory EFI system to take advantage of timing adjustments and settings. MSD's 6LS extension harness allows you to reach the front-mounted cam sensor on an early (24-tooth trigger wheel) LS2 when installing a 6LS Ignition Controller. The 6LS-2 Controller allows you to map a timing advance curve with MSD's easy-to-use Pro-Data+ software.
Not Yet Reviewed
$149.95
$82.95
On Sale
Holley analog standalone gauges provide you with a simple yet modern way to monitor all types of engine and drivetrain functions. Their slim-style mounting requires very little depth, and all of the gauges feature dimmable LED backlighting to ensure you can always see the indicator, no matter the environment. Holley analog standalone gauges are available in a variety of data types and ranges for temperature and pressure monitoring, along with programmable fuel level and voltage options. Features include: * Designed for a 2 1/16 in. openings * Available with black face with white lettering or white face with black lettering. * LED dimmable backlit design with red pointers makes them easy to read day or night * All gauges are electric-style and include sending units depending on gauge type * Pointer is driven by either a high-torque internal stepper motor or internal microprocessor (depending on model) to ensure accurate movement in street and racing conditions * Spin lock ring threads to back of gauge case for simple and secure gauge mounting * CNC-machined billet aluminum bezels with anodized finish * Bezels are threaded for easy replacement; multiple bezel options available * Each gauge is tested to ensure a top-quality and accuracy
( 2 )
$192.95
$106.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
