Availability
On Sale
Dinan carbon fiber air intake systems force-feed the engine with greater volumes of cool, oxygen-rich air for substantial power gains. These kits are so effective that the carbon fiber inlet air temperature is a full 40 degrees F cooler than the incoming air from the stock inlet. Due to the increased airflow, the power-curve is extended into the higher rpm for a noticeable change. Dinan carbon fiber air intake systems are direct replacements for the factory air box lid. They employ a hand-crafted carbon fiber unit--including a secondary carbon fiber intake tube that captures cool air from the lower grill. Shielding is provided for the conical filter to insulate it from power-robbing engine compartment heat. Order the model designed for your vehicle and engine application.
( 4 )
$2,299.95
—
$2,399.95
$2,068.95
—
$2,158.95
On Sale
For Jeep lovers who wish to upgrade their axles, Spicer Drivetrain Products Ultimate Dana 44 crate axle assemblies will give you increased durability and strength, on and off the trail. You can be assured of quality and performance when you rely on an industry leader like Spicer Drivetrain. Features: * Axle tubing 5/16 in. thick * Nickel chromoly steel axle shafts * Steel brackets 1/4 in. thick * 1350 axle shaft U-joints * Nodular iron differential cover
( 1 )
$4,134.99
—
$5,169.99
$3,721.49
—
$4,704.69
On Sale
Baer Brakes Baer Claw Pro+ disc brake systems are built to please the most demanding users. They include Baer 6P compact 6-piston calipers machined from 2618 forgings, resulting in the stiffest possible design, even at extreme operating temperatures. They use radial mounting configurations to disperse loads evenly, and internal fluid transfer tube passages for an ultra-clean look. Baer Claw Pro+ disc brake systems include brake rotors with zinc coated surfaces and a matched set of brake pads. The unique 2-piece rotors use an aluminum hat to reduce overall weight, allow for differential expansion of the rotor plates, and lower thermal transfer to the hub. Nearly 700 models are available for specific vehicle, bolt pattern, and axle applications.
( 8 )
$2,394.95
—
$3,294.95
$2,154.95
—
$2,964.95
On Sale
Get your rig ready to rock on! Trail-Gear Rock Assault 9 rear roller kits are built with the strength to climb boulders and blaze trails—at prices that are hard to beat. The kits are available with a choice a tubing sizes. Start or upgrade your build with Trail-Gear Rock Assault 9 kits. Kits include: * Rock Assault 9 axle housing * Unit hubs (lug nuts included) * Unit bearing pockets * Rock Assault 9 billet aluminum seal housing kit * Rock Assault 9 fully loaded brake kit
Not Yet Reviewed
$2,699.99
$2,375.99
On Sale
Get your rig ready to rock on! Trail-Gear Rock Assault 9 front roller kits are built with the strength to climb boulders and blaze trails at prices that are hard to beat. The rock-hard housings start with 1/4 in. formed shells, and then a 1/2 in. face plate is attached. DOM axle tubes are welded to the center section with the industry's first 3-point attachment system, giving the tubes superior support and engagement into the center section. These kits are available in a choice of tubing wall sizes. Start or upgrade your build with Trail-Gear Rock Assault 9 kits. Trail-Gear front roller kits come with: * Rock Assault 9 axle housing * Unit hubs (lug nuts included) * Rock Assault 9 knuckles * Rock Assault 9 inner C's * Rock Assault 9 steering arm set * Rock Assault 9 billet aluminum seal housing kit * Rock Assault 9 fully loaded brake kit
Not Yet Reviewed
$4,299.99
$3,826.99
On Sale
Developed through close collaboration with leading F1 drivers and teams, Bell Racing carbon fiber HP7 High Performance Series helmets are aerodynamically sleek, lightweight, and efficient for the intense demands of all forms of racing. Meeting FIA8860-2018 "Advanced Helmet" standard, the HP7s are also equally popular amongst professional drivers in open cockpit cars, closed Sports cars, and GT cars, thanks to their very high level of comfort. For professional drivers competing in high-speed forms of motorsports, the HP7s allow racers to take advantage of the latest technological innovations, including aerospace composite materials and advanced energy absorbing liner systems. Bell Racing's HP7 is offered with or without a front duckbill to enhance aerodynamic performance. Available in several sizes, select the helmet style preferred in your ideal fit. Features: * Full face helmet featuring high-strength and high-modulus carbon fibers creating an ultra-lightweight FIA8860-2018 carbon shell * Advanced multi-density, multi-piece liner -- Maximize energy absorption and impact performance -- High-comfort fire retardant materials * Optical grade injected Double Screen Anti-Fog (DSAF) shield for anti-fog control and superior visibility * Powerful and effective top and chin bar ventilation system with 12 air intake and extraction channels for maximum ventilation * Air intake system includes 2-part center and low profile on sides (installed) * Optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities * Integrated channels in face piece offering multiple options to install drink tube and communication systems * Factory installed Hans anchors as original equipment * Synthetic rubber gasket seal to prevent dirt and water from entering the helmet * HP helmet bag included * Pivot kit
Not Yet Reviewed
$4,199.95
$3,779.96
On Sale
Bell Racing HP77 High Performance Series helmets are based on Bell's highly successful and multiple F1 World Champion-proven HP7 design. Chosen by most top professional open cockpit racers, the HP77 provides advanced protection, featuring a very narrow eye port on top of which high-strength ballistic materials have been incorporated. Following a long tradition of innovation, the HP77s were the first helmets to meet the latest FIA8860-2018-ABP standard, the most rigorous sport helmet standard on the planet designed for professional Formula racers competing at the highest levels of the sport. Bell's HP77 High Performance helmets are known for their lightweight, aerodynamic qualities, superior cooling, and amazing defogging system that meets the intense demands of open cockpit racing in all types of weather. Available in several sizes, select your ideal fit. Features: * Full face helmet featuring high-strength and high-modulus carbon fibers creating an ultra-lightweight FIA8860-2018 ABP shell * Very narrow eye port * Frontal area with integrated ballistic materials for added protection from flying debris * Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance * Optical grade injected Double Screen Anti-Fog (DSAF) shield for anti-fog control and superior visibility * Powerful and effective top and chin bar ventilation system with 12 air intake and extraction channels for maximum ventilation * Air intake system includes 2-part center and low profile on sides (installed) * Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities * Integrated channels in face piece offering multiple options to install drink tube and communication systems * Factory installed Hans anchors as original equipment * Synthetic rubber gasket seal to prevent dirt and water from entering the helmet * HP helmet bag included * Shield and pivot kit
Not Yet Reviewed
$5,599.95
$5,039.96
On Sale
Trail-Gear offers fully built Rock Assault front and rear axles made of entirely new parts and customized to your choices. They include everything needed from hub-to-hub, and are expertly assembled by TG's master mechanics. Save yourself time, money, and the hassle of ordering each component separately and then building it yourself. You make the choices and let Trail-Gear do the assembly! Select your kit. Front and Rear Rock Assault fully built axles feature: * 5/16 in. thick, high-strength DOM axle tubes that engage 5/8 in. further into the center section and the 360-degree gusset welded around the tubes on the inside of the housing * Axle tubes have been offset above the housing centerline to allow the inner axles to ride near the bottom of the axle tubes rather than in the center * Increase of 3/8 in. ground clearance under the axle tubing * Heavy-duty, press-formed, 1/4 in. plate steel center section shell is specially shaped to ensure a minimum of 3/4 in. additional clearance under the differential * Differential mounting surface is made from 1/2 in. plate steel Rear axle kit contents and features: * Rock Assault axle housing * Complete rear disc brake kit * Chromoly axle shafts * Bearing pockets * Rear axle bearing service kit * All necessary nuts and studs * Outer offset flanges are made from 4130 chromoly to prevent distortion or bending * Housings are precision aligned using start-of-the-art, 3D digital imaging equipment * Customize each axle to exactly what you need with your choice of: -- Axle width -- Differential Front axle kit contents and features: * Toyota Rock Assault axle housing * Upgraded Longfield 30-spline Birfields * 30-spline chromoly axle shafts * Fully Loaded Six-Shooter knuckle kit * Chromoly spindles * Upgraded brake rotors and calipers * Heavy-duty tie rod and drag link * Trail-Gear's upgraded Trail Safe seals * Super Metal knuckle studs * All necessary nuts, bolts and seals * 59 in. from WMS to WMS * Knuckle balls are forged from 1035 steel * Customize each axle to exactly what you need with your choice of: -- Axle width -- Axle offset -- Differential -- Hubs or flanges
Not Yet Reviewed
$4,599.99
$3,909.99
On Sale
FiTech Ultimate LS EFI 500 hp fuel injection systems with Go Fuel in-tank module combines incredible engineering and construction for top-of-the-line performance. FiTech fabricated many billet aluminum parts for their Ultimate LS EFI 500 hp systems, including a 92mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch screen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. The Go Fuel in-tank module universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Whether you're starting with a 5.3 junkyard dog or a crate motor, FiTech Ultimate LS EFI 500 hp systems with Go Fuel in-tank module will look and run exceptionally. Additional Ultimate LS features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch screen hand-held controller with data log features * Suction cup mounting bracket
( 1 )
$2,525.99
—
$2,726.99
$2,020.79
—
$2,181.59
On Sale
Spicer Driveline Ultimate Dana 44 AdvanTEK crate axle assemblies offer increased strength and durability in every facet—from thicker bracket mounts to upgraded materials to beefier housing tubes. Strength, versatility, bolt-in convenience, and a rock-solid history: it all comes together harmoniously in the Ultimate Dana 44 AdvanTEK crate axle assemblies from Spicer Driveline. Order the model with the ring and pinion ratio needed for your application. Spicer Ultimate Dana 44 AdvanTEK advantages: * Aggressive nodular iron differential cover * Heat-treated high-grade SAE-4340 chromoly steel axle shaft offers superior abrasion resistance and strength, as well as uniform surface * Thicker steel bracket mounts * Upgraded U-joints outperform the competition, with Nm load ratings of 3000 (1350 Series) and 3600 (1400 Series) * Thicker tubes for added strength * Custom high-clearance housing is designed to optimize extreme off-road performance * Expanded gear ratio options to accommodate different tire sizes * Genuine Spicer AdvanTEK ring and pinion gears for greater strength * Track width is identical to OE track width * No FAD (front axle disconnect) means increased strength * Selectable E-Locker
Not Yet Reviewed
$5,699.99
$5,129.99
On Sale
FiTech Ultimate LS EFI 750 hp fuel injection systems with Go Fuel in-tank module combines incredible engineering and construction for top-of-the-line performance. FiTech fabricated many billet aluminum parts for their Ultimate LS EFI 750 hp systems, including a 102mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 55 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch screen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. The Go Fuel in-tank module universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Additional Ultimate LS features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch screen hand-held controller with data log features * Suction cup mounting bracket
( 1 )
$2,663.99
—
$3,013.99
$2,131.19
—
$2,411.19
On Sale
Incorporating technology used in their state-of-the-art HP7 advanced helmets, Bell Racing HP6 RD High Performance Series helmets, with their modern and aggressive design, have been developed for racers in closed-car environments. They feature a wide eye port for extended vision with an ultra-lightweight advanced carbon shell and ventilation slots that can be connected to various types of air intakes for external cooling systems. The RD version can be fitted with optional earcups, providing optimal noise insulation with fully integrated radio communication kit and hydration systems. Available in several sizes, select your ideal fit. Features: * Full face helmet with ultra-lightweight FIA8860-2018 advanced carbon shell * Advanced multi-density, multi-piece liner -- Maximize energy absorption and impact performance -- High-comfort fire retardant materials * Wide eye port opening for optimal vision in closed cockpit cars * Integrated channels in face piece offering multiple options to install drink tube and communication systems * Extraction vents to maximize cooling and air circulation * Factory installed Hans anchors as original equipment * HP helmet bag included
Not Yet Reviewed
$3,099.95
$2,789.96
On Sale
Incorporating technology used in their state-of-the-art HP7 advanced helmets, Bell Racing HP6 High Performance Series helmets, with their modern and aggressive design, have been developed for racers in closed-car environments. They feature a wide eye port for extended vision with an ultra-lightweight advanced carbon shell and ventilation slots that can be connected to various types of air intakes for external cooling systems. Available in several sizes, select your ideal fit. Features: * Full face helmet with ultra-lightweight FIA8860-2018 advanced carbon shell * Advanced multi-density, multi-piece liner -- Maximize energy absorption and impact performance -- High-comfort fire retardant materials * Wide eye port opening for optimal vision in closed cockpit cars * Integrated channels in face piece offering multiple options to install drink tube and communication systems * Extraction vents to maximize cooling and air circulation * Factory installed Hans anchors as original equipment * HP helmet bag included
Not Yet Reviewed
$2,899.95
$2,609.96
On Sale
FiTech's Ultra Ram EFI 800 hp in-tank pump/regulator fuel injection master kits feature their outstanding Ultra Ram with aggressive looking sheet metal intake manifold along with an in-tank fuel delivery system. Also included in these packages is a Go Fuel Tight Fit regulator with gauge. Designed for the do-it-yourself hot rodder to the professional EFI tuner, these kits are ready to go with everything you need to convert your carbureted engine to top-of-the-line EFI FiTech self-learning technology. These Ultra Ram EFI systems will support up to 800 hp and come out of the box with the injectors and fuel rails installed. The robust ECU is easy to mount and handles the air/fuel mixture targets and you only need to input a few engine specs into the color touch screen monitor to get the engine to rev up. Ultra Ram is supplied with a sheet metal intake, cast aluminum 102mm throttle body, remote mount ECU, main harness, handheld controller, cable and windshield mount, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For fuel delivery, these FiTech Ultra Ram master kits include either a Go Fuel in-tank 340 or 440 lph pump module. They can be used on tanks with a depth of 6 to 15 in. and feature a billet top assembly designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. A vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. The Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes a gauge.
Not Yet Reviewed
$2,413.99
$2,051.89
On Sale
FiTech's Ultra Ram EFI 800 hp in-tank pump/regulator/Go-Spark fuel injection master kits feature their outstanding Ultra Ram with aggressive looking sheet metal intake manifold along with an in-tank fuel delivery system. Also included in these packages is a Go Fuel Tight Fit regulator with gauge and a Go-Spark CD ignition for high-powered sparks that improve combustion and power output. Designed for the do-it-yourself hot rodder to the professional EFI tuner, these kits are ready to go with everything you need to convert your carbureted engine to top-of-the-line EFI FiTech self-learning technology. These Ultra Ram EFI systems will support up to 800 hp and come out of the box with the injectors and fuel rails installed. The robust ECU is easy to mount and handles the air/fuel mixture targets and you only need to input a few engine specs into the color touch screen monitor to get the engine to rev up. Ultra Ram is supplied with a sheet metal intake, cast aluminum 102mm throttle body, remote mount ECU, main harness, handheld controller, cable and windshield mount, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For fuel delivery, these FiTech Ultra Ram master kits include either a Go Fuel in-tank 340 or 440 lph pump module. They can be used on tanks with a depth of 6 to 15 in. and feature a billet top assembly designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. A vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. The Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes a gauge. Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for 4-, 6- and 8-cylinder engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer.
Not Yet Reviewed
$2,603.99
—
$2,624.99
$2,213.39
—
$2,231.24
On Sale
FiTech Ultimate LS Truck EFI 750 HP fuel injection systems with Hy-Fuel thoroughly ease the process of adding fuel injection. They fabricated many billet aluminum parts for these systems, including a 102mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 66 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch-screen, self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. Hy-Fuel in-tank modules can be run as either returnless or return-style by use of the 3-bar regulator or block-off. They feature a unique baffling system, making it easy for fuel to enter, but difficult to leave, even under hard corners, bumps, and moderate off-road adventures. They can be added to new or existing fuel tanks. For quick response and incredible abilities, install FiTech Ultimate LS Truck EFI 750 HP fuel injection systems with Hy-Fuel. Additional Hy-Fuel in-tank module features: * Can go from 14 in. deep pump to 6 in. by cutting tube * Available with 340 lph (89 gph) fuel pump supporting up to 800 hp * O-ring style 360 degree mounting flange for ease of maintenance * Excellent choice for racing, drifting, off-road, autocross, etc. * Billet aluminum construction with precision-machined components and -06 AN fittings * 35 sq. in. filter Additional EFI features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 inches of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch-screen, hand-held controller with data log features * Suction cup mounting bracket
Not Yet Reviewed
$2,608.99
$2,087.19
On Sale
APR cat-back exhaust systems personalize your vehicle's looks, sound, and performance. Beautifully hand-crafted T304 stainless steel components adorn the system, with stunning TIG welding throughout. The straight-though brushed finish mufflers smooth the exhaust note to a deep growl, without adding restrictions, while the Helmholz resonator reduces unwanted frequencies. Strong high-quality bracketry and OE-style clamps hold the system steadily in place, making the install or removal a snap—and fitment simple, yet precise. Additional details: * Low-profile design, suitable for lowered vehicles * Larger diameter piping and tips, compared to stock * No increase in weight, compared to stock * Limited lifetime warranty
Not Yet Reviewed
$2,699.95
—
$3,799.95
$2,428.95
—
$3,418.95
On Sale
Customize your car style and ride, with Koni GTS coilover suspension. With a history developed in Formula 1 racing, Koni knows how to maximize the control of your suspension setup. Koni GTS coilover suspension kits combine world-class Koni Sport adjustable valving, linear lowering springs, ride height adjustable perches, and threaded bodies--a full kit ready to install on your car. Made for both on road driving and weekend track days, the GTS coilover range offers the user a fully customizable suspension package, ride height adjustable and valving adjustable, allowing a wide range of suspension setups. Look stylish with maximum suspension practicality; select the Koni GTS coilover kit designed for your vehicle.
Not Yet Reviewed
$2,198.67
$2,066.75
On Sale
Over the years, Superlift has established a reputation as the "go-to" source for suspension components. Superlift suspension lift kits are designed and built by real off-road enthusiasts, so you know they're complete and super-strong. Properly addressing things that are generally ignored by others, yet matter—it all adds up. Superlift suspension lift kits are available in a variety of lift heights and styles to fit your budget and needs. Depending on the application, Superlift suspension lift kits may feature: * Steering knuckles, crossmembers, torsion bar brackets, bump stops, belly pan, brake line brackets, and front sway bar links * Upper and lower control arm drop brackets, center link, rear shocks, rear blocks, and U-bolt kit * All hardware specific to the application * Custom-designed, engine-specific spring rates and shock valving * Ideal caster settings * Suspension compression travel control * Correct track bar/pitman arm phasing * Designed using original equipment CAD data for accuracy * Compatible with OE stability control and anti-skid control * No problem codes or irritating dash lights * Makes room for up to 37 in. tires (varies by make and model) * Maximum ground clearance * Maintains awesome ride quality and handling characteristics * Aligns to OEM specifications * Corrects front-to-rear factory rake for a level stance * Detailed instruction manual suitable for do-it-yourself or professional installation
( 51 )
$2,379.99
—
$2,479.99
$2,022.99
—
$2,107.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
