Availability
On Sale
Summit Racing™ Performance LS7 hydraulic roller lifters are a definite upgrade over stock originals. Designed for high horsepower engines that demand increased oiling and higher-rpm capabilities, these replacement lifters will fit in SBC roller engines, as well as LS-based engines without active fuel management (AFM/DOD). Beat the competition to the finish line with Summit Racing™ Performance LS7 hydraulic lifters!
( 19 )
$229.99
$204.99
On Sale
Summit Racing™ LS lifter and guide kits offer top-quality, precision-made pieces at an excellent value! These kits include a set of roller lifters, lifter guide bolts, and LS2 lifter guides.
( 41 )
$265.98
$240.98
On Sale
Aeromotive universal bypass fuel pressure regulators are dual purpose—for use with fuel systems in street or track applications. They feature adjustable base pressure and are ideal for vehicles/systems where superior flow and pressure control are desired. The regulators are available in different styles and pressure ranges, and for fuels such as gasoline, diesel, and flex.
( 178 )
$201.55
—
$290.15
$162.25
—
$261.14
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 55 )
$204.99
—
$257.99
$199.99
—
$242.99
On Sale
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 999 )
$112.95
—
$286.95
$101.66
—
$258.26
On Sale
Blue electric fuel pumps from Holley feature an improved design for street and strip applications, a new lower housing casting for enhanced fuel flow, and a tumble-polished billet look with the distinctive blue logo. These pumps have a 110 gph flow rate, draw only 3 amps, and have a maximum pressure of 14 psi. They weigh only 3 lbs., and include a mounting bracket.
( 304 )
$239.95
$179.95
On Sale
Aeromotive Stealth electric fuel pumps provide your ride with the fuel it needs to own the road or the track. They feature a compact, lightweight design that will bolt into most existing hanger assemblies, making them an easy upgrade to your fuel system. These versatile components utilize a turbine pumping mechanism that increases durability and allows use in most pulse-modulated applications. Don't settle for lesser fuel pumps; feed your engine with the Aeromotive's Stealth fuel pumps best suited for your application!
( 185 )
$157.00
—
$271.05
$134.99
—
$232.99
On Sale
Stealth 340 pumps are high-output, in-tank, electric fuel pumps for fuel injected and carbureted applications. At a volume rate of 340 liters per hour. These universal pumps bolt into many existing hanger assemblies, and are a direct fit upgrade for many OE applications. These pump will support up to: * 1000 HP (carbureted/naturally aspirated) * 850HP (carbureted/forced induction) * 850HP (EFI/naturally aspirated) * 700HP (EFI/forced induction) * 700HP on E85 (carbureted/naturally aspirated) * 595HP on E85 (carbureted/forced induction) * 595HP on E85 (EFI/naturally aspirated) * 490HP on E85 (EFI/forced induction)
( 17 )
$157.00
$141.30
On Sale
Aeromotive A1000 Gen-II EFI fuel pressure regulators feature excellent control, superb durability, and a high-flow design suited for medium to high-horsepower powerplants. These units have been downsized and lightened up, and yet remain as incredible as ever. They're compatible with alcohol or gasoline, have a 1/8 in. NPT gauge port, and are available in either -6, -8, or -10 AN inlets with a -6 return. Keep your vehicle's engine roaring with Aeromotive A1000 Gen-II EFI fuel pressure regulators.
( 5 )
$271.05
$232.99
—
$243.94
On Sale
McLeod StreetPro clutch kits are excellent performance clutches for street enthusiasts. StreetPros are ideal for use with basic engine modifications, including cold-air intakes, exhaust upgrades, and engine management programming. These McLeod kits provide slightly heavier pedal effort with increased holding capacity, making them excellent factory replacement performance clutches. Order the size to match your vehicle specifications. Additional features and benefits include: * Bolt to stock flywheels * Handle up to 400 hp * Organic disc facing for smooth engagement with excellent release qualities
( 162 )
$255.00
—
$305.00
$229.50
—
$274.50
On Sale
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 254 )
$165.50
—
$315.95
$148.95
—
$261.14
On Sale
Aeromotive offers compact EFI regulators for applications producing up to 1,000 hp, where space is at a premium. Their compact design fits small engine compartments while providing big performance. They ideally work with EFI systems where only one inlet is needed.
( 24 )
$201.55
$172.99
On Sale
Aeromotive fuel filters feature an advanced flow-through design to allow for steady fuel flow with less than a .15 psi pressure drop. Designed for carbureted or fuel injected engines from 200 to 3,000 hp, they're made from 6061-T651 aluminum alloy with the impeccable machining and finish you've come to expect from all Aeromotive components. The filters are available in a variety of size options for all types of fuel.
( 108 )
$140.00
—
$279.55
$126.00
—
$251.60
On Sale
Easily lift your engine with one of these Summit Racing™ engine slings. The nylon strap design prevents damage to valve covers, intakes, or any other engine accessory when lifting. The 24 in. straps allow the sling to clear most intake setups. Simply attach the four strap mounting tabs to the engine block and use a traditional engine hoist to safely support your engine during removal and installation.
( 38 )
$112.99
$101.69
On Sale
Aeromotive Phantom fuel systems are an industry game-changer! Order one of these Phantom fuel pump wiring kits to get yours up and running! They include all the necessary hardware and connectors to complete the installation. Features and notes for Aeromotive Phantom fuel pump wiring kits: * 20 ft. overall length for full-size vehicles * 30 amp 12 VDC automotive relay * 30 amp 12 VDC circuit breaker * 10-gauge fuel pump power/ground wire * 16-gauge trigger wire * Cable ties * Self-tapping mounting screws * Required tools include electrical terminal crimping tool, 5/16 in. nut driver, and electric drill
( 31 )
$178.75
$153.99
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$151.70
—
$290.15
$136.53
—
$261.14
On Sale
Summit Racing™ sport seats deliver the look of expensive racing seats without the expensive price tag! Our seats are soft and comfortable with lumbar and shoulder bolsters for added support, cutouts for safety harnesses, and recline and tilt forward mechanisms. Adjustable sliders are also included and you can choose tear resistant nylon, vinyl, or simulated leather upholstery to dress your interior with performance appeal. Get more for your money with Summit Racing™ sport seats.
( 160 )
$219.99
$169.99
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 352 )
$138.95
—
$230.95
$104.95
—
$150.95
On Sale
Common knowledge and experience tell us that open spacers help top-end power, and 4-hole spacers help midrange power. Now, the best of both worlds have been merged into one with these HVH Super Sucker carburetor spacers. Compromises are minimized, so it's no longer necessary to sacrifice one portion of the power band to increase another. The unique transitionary blend from the 4-hole ports at the base of the carburetor to the open plenum of the intake manifold has provided tangible gains in both midrange and high-rpm power.
( 58 )
$114.99
—
$222.99
$103.49
—
$200.69
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 462 )
$167.45
—
$263.15
$105.95
—
$168.95
On Sale
These A1000 carbureted bypass regulators from Aeromotive allow you to convert from fuel injection to carburetion by using your EFI fuel pump. They deliver consistent volume at perfect pressure, right to your carburetor. They feature adjustable base fuel pressure and are perfect for any application, from the street to the track, naturally aspirated or supercharged. Their bypass design provides the ultimate dynamic fuel delivery system.
( 20 )
$246.10
$221.49
On Sale
Lost your flux? FTI Performance solenoids will restore the operation of your trans-brake. These steel replacements are offered to fit several applications for FTI and non-FTI trans-brakes. Convert that electrical energy into mechanical force efficiently with FTI Performance solenoids.
( 16 )
$135.00
—
$169.00
$121.50
—
$152.10
On Sale
RaceQuip PRO20s are Snell SA2020-rated, full-face auto racing helmets that incorporate contemporary styling with modern production techniques. The shell utilizes pressurized steel molds to achieve the best combination of strength and lighter weight. The SA rating means that the interior, paint, and Kevlar® chin strap are fire retardant, so PRO20 helmets are suitable for all motorsports. If you need or prefer a full-face helmet, this is the model for you. Please verify the size when ordering. Additional features of RaceQuip PRO20 full-face helmets include: * Exceeds Snell SA2020 rating * Lightweight pre-preg composite shell * Expanded polystyrene (EPS) liner mated to shell * Distortion-free 3mm polycarbonate face shield with red anodized aluminum pivot kit * Hand-ratcheting tear-off posts * Silicone eyeport gasket seals out dust and dirt * Wide eyeport provides excellent peripheral vision and allows for the use of personal eyewear * Reinforced M6 threaded HANS/HNR inserts for easy HANS or other head-and-neck-restraint device anchor posts (not included) * Comfort-fit blended Nomex interior with top and back exhaust vents help keep your scalp cool * Slick aero-design with medium-sized chin spoiler * Available in a variety of colors and sizes
( 119 )
$329.95
—
$399.95
$181.95
—
$247.95
On Sale
For a smooth rebuild, choose FTI Performance transmission pans. These deep aluminum pans offer the capacity and correct fit for your project. They're available for several applications and include filter extension and bolts. Shift your build into high gear using FTI Performance transmission pans.
( 42 )
$129.00
—
$229.00
$116.10
—
$206.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
