Availability
Showing In Stock Items. Show All 55 Items.
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
$898.95
On Sale
MSD 7AL-3 ignition boxes have been a favorite of sportsmen and racers that want adjustments at their fingertips. For nitrous fans, there are four separate stages that can be activated independently yet add up together. Plus there's an RPM Activated Switch for precise control over a circuit. These ignitions combine high-output spark energy for high-compression race engines, combined with the most popular drag racing accessories, including a 3-step rev limiter, 4-stage retards, a start retard, and an rpm-activated switch. MSD is re-launching the 7AL-3s with upgraded features, a new look, and updated internal components, including surface mount circuitry. The new 7AL-3s are easy to spot with a black anodized housing and a new adjustable start retard circuit. Racers will also be happy to learn that the ignition can now be used on 4, 6, or 8-cylinder engines! Additional features include: * Fits the same mounting footprint as the original 7AL-3 * Start retard is adjustable with plug-in retard modules * Retard stages require positive 12 V to activate * Surface mount assembly reduces internal components
( 30 )
$1,099.95
$988.95
On Sale
FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.
( 51 )
$959.00
—
$1,202.00
$815.15
—
$1,021.70
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$861.84
—
$1,025.54
$778.24
—
$963.00
On Sale
XS Power RSV Titan8 lithium batteries are designed to maximize capacity and deep cycling abilities. Part of XS Power's Lithium Titanate Oxide (LTO) Series, they have double the amount of storage energy but only half of the instant discharge energy, giving them double the capacity rating, but half of the wattage rating. The built-in 2/0 bussing allows up to four positive and four negative hidden direct connections to each module without the need for any external exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of nearly any configuration from 12 V, 24 V, 36 V, or any configuration imaginable. XS Power RSV Titan8 BCI direct-fit models are also available.
Not Yet Reviewed
$869.99
—
$999.99
$800.39
—
$919.99
On Sale
FiTech Ultimate TPI standalone ECUs bring an old GM TPI-controlled engine (L98, LB9) into modern times. These standalone EFI kits plug into all existing sensors on a GM TPI engine and provides complete control of the engine. From timing control to self-learning fueling, FiTech Ultimate TPI standalone ECUs deliver new life into the GM TPI engine.
( 9 )
$954.00
$810.90
On Sale
The 2019-2022 (22.5+ refresh not supported at this time) GM gas trucks have been locked down since their introduction. Owners of these trucks have been waiting patiently for a tuning solution, and DiabloSport has delivered in a big way! The new 8225-R kit includes an industry-leading inTune 3 handheld tuner, along with the locksmith device and harnesses required to unlock both the ECM and TCM in your truck. Once unlocked, the inTune 3 offers up tunes for 87, 91 and 93 octane fuels, as well as two transmission tunes to choose from. Beyond the preloaded tunes, DiabloSport offers a host of user adjustable parameters, like throttle response, speed limit, tire size, and of course, DFM disable! They've even added some new features for drivers of these newer trucks, like the ability to recall your last mode setting, or to retain your auto-start-stop setting. Get power you can feel—with DiabloSport! DiabloSport inTune 3 GM E90/T93 unlock kit features: * ECM and TCM unlock included * Unlock and tune at home * Preloaded tunes for multiple octane levels * Support for 5.3L and 6.2L V8 applications with 6, 8 or 10-speed transmissions * Disable Dynamic Fuel Management for full time V8 operation * Throttle Boost setting for adjustable throttle feel * Adjust speedometer for larger tires (26 – 38 in.) * Calibrate speedometer for gear change (3.42-5.13) * Remove speed limiter for increased top speed * Adjust engine rev limiter for increased RPM range (+/- 400 rpm) * Adjust engine idle speed in Park/Neutral and Drive * New 'Keep Auto Stop Start Setting' allows you to disable the system using the button on the dash—and it stays that way! * New 'Keep Drive Mode Setting' allows you to select a drive mode and it will remember that mode next time you start the truck!
( 1 )
$849.95
$763.95
On Sale
MSD 7AL-2 Plus CD ignitions have all the features of the standard 7AL-2 with the addition of a 2-step rev control and a new diagnostic LED to deliver their full power at any rpm. Their multiple spark discharge circuitry gives better throttle response, off-corner performance, smooth idle, and more consistent launches. Their built-in soft touch rev control protects your engine from damage due to over-revving and they feature accurate rev-limiting action that's smooth, without backfires or roughness, and adjustments are easily made with plug-in modules. They can be triggered from points, magnetic pickups, crank triggers, and electronic amplifiers. MSD 7AL-2 Plus CD ignitions are available for 4, 6, and 8-cylinder engines. From NHRA to Circle Track, they're proven winners.
( 19 )
$849.95
$763.95
On Sale
MSD Programmable Digital-7 CD Plus ignitions have an output power and Individual Cylinder Management timing system that are hard to beat. At the heart of these ignitions is a 15 MHz micro-controller that analyzes and manages every trigger signal. Their capacitive discharge circuits and state-of-the-art IGBT coil drivers work together to deliver a potent spark that can easily handle high cylinder pressures. Below 3,300 rpm, a series of sparks burn in the cylinder over 20 degrees of crankshaft rotation, producing a smooth idle with great throttle response. You can control all of this spark energy through an array of timing and rpm programs. These programs include: Individual cylinder timing that can program up to 10 degrees per cylinder in .1 degree increments, a launch retard that lets you retard the timing up to 15 degrees for 0-2.5 seconds after the launch, a launch timing curve, and a run curve enabling you to plot a timing curve in .1 degree increments per 100 rpm. They also feature a three-step retard, a gear retard that can retard timing up to 5 degrees with every gear change, a start retard, three rev limiters, a shift light, and an rpm-activated window switch. You can also map a complete timing curve for every gear, set stage retards to ramp timing, see updated X-Y plots with interpolation for smooth changes, view all ignition events in a new Launch History window, acquire 20 seconds of run data including two seconds prior to launch, program an rpm that is ramped in during the launch, and select vacuum advance and boost retard through a MAP sensor. They can be used on 4, 6, or 8-cylinder engines, and are supplied with the Pro-Data Plus software, PC harness, vibrations mounts, and wiring. An optional hand-held MSD Programmer Monitor is available separately.
( 3 )
$1,099.95
$988.95
On Sale
It's time to outfit your vehicle with a high-quality, high performance ignition system—and these MSD combos from Summit Racing™ make it a breeze! The kits start with a 6A digital CD ignition box, then add a high-efficiency Blaster coil and a Pro-Billet distributor. We finished the combos with a complete set of Street Fire wires to deliver all of that powerful spark! Wake up your street and strip engine with a powerful Summit Racing™ MSD complete ignition combo, available for applications as far back as the 1950s.
Not Yet Reviewed
$1,030.54
$926.50
On Sale
Introducing the Garmin Catalyst—an industry-first racing coach and driving performance optimizer that's changing the world of motorsports! It mounts in the cockpit, gathering performance data and providing real-time audible coaching. Immediate session analysis helps drivers of all levels achieve their full track driving potential. The Groundbreaking True Track Positioning technology uses built-in sensors and 10 Hz multi-GNSS positioning to automatically generate your car's racing line on the track. In addition, the revolutionary True Optimal Lap technology shows your best achievable time, based on lines you actually drove and can repeat. While on the track, drivers hear real-time coaching cues through a compatible Bluetooth-enabled headset or car stereo (headset sold separately). After your session, simply use the touchscreen display to immediately review your performance data and see your major areas for improvement. Garmin Catalyst is not intended for public roadway use. Other key product features: * Automatically interprets your data to show biggest areas of gain right on the 7 in. Catalyst (backlit) display, no computer needed * Securely position Catalyst inside the cockpit using the included heavy-duty suction cup or screw-down mount * Easily compare your performance data from other sessions, and get immediate, adaptive suggestions * Shows best lap time, adaptive delta time, number of laps and session time * Preloaded track database includes road courses from around the world * Review in-depth performance data on your Garmin Catalyst device, or access a summary of your data on your mobile device or computer using Garmin Connect
( 5 )
$999.99
$899.99
On Sale
Edge's EZ+Insight CTS3 L5P Duramax kits provide "EZ" power for your Duramax diesel paired with their Insight CTS3, giving you more control with added features, like the ability to read and clear trouble codes, perform a manual DPF Regeneration cycle, and of course, monitor everything going on under the hood. Get peace of mind with the data Insight provides real-time through a state-of-the-art color touch screen. Watch live data, like EGTs, boost, rail pressure, soot levels, DPF status, and even distance since your last regen. Edge EZ module makes a massive improvement in drivability without sacrificing longevity or the reliability of your emissions equipment. Their intuitive smartphone app offers on-the-fly tuning adjustments over five specific calibrations, and to further enhance your driving experience, each of the five power levels can be adjusted to run one of seven throttle pedal settings giving you the control over throttle feel, eliminating pedal lag. For extra value and savings, purchase an Edge EZ + Insight kit to give your L5P exactly what it needs.
Not Yet Reviewed
$999.95
$898.95
On Sale
Take your Power Grid system to the next level with these Power Grid system rev limiter modules! These modules plug into the CAN-BUS bridge and are designed to set rpm limits based on the slew rate or on the time since launch. MSD Power Grid rev limiter modules work great with MSD View software.
Not Yet Reviewed
$949.95
$853.95
On Sale
If you run a blower, turbo, or even a naturally aspirated engine, MSD's Boost Timing Masters allow you to run at the edge of detonation for maximum power output. They can prevent detonation by automatically retarding the timing as your manifold pressure increases. The secret lies in a boost pressure sensor that's inside MSD's solid-state control box. The sensor reads boost pressure through a 1/8 in. vacuum hose attached to a boost pressure source. The result gives you peak power without harmful detonation. A dash-mounted control knob allows you to dial in the retard from 1 to 3 degrees per pound of boost pressure, up to a maximum retard of 15 degrees. Vacuum tubing is not included. These units must be used with an MSD 6, 7 or 8 series ignition.
( 6 )
$926.95
$833.95
On Sale
MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.
( 1 )
$1,099.95
$988.95
On Sale
A great way to get all of the power that you can out of your Ford crate engine is with MSD ignition kits. These ignition kits have everything that you need for your engine to reach its full potential--an easy-to-install, ready-to-run distributor featuring a high-output module that produces a vigorous jolt across the plug gap, a Blaster SS coil that's small but mighty and features efficient E-core windings, brass terminals and Rynite housing, and 8.5mm spark plug wires with separators--"the" performance wires for incredibly low resistance without electronic interference. Ford crate engine ignition kits also include a billet hold-down clamp, and a steel gear is installed on the distributor for compatibility with hydraulic roller camshafts. Power up your Ford crate engine with MSD ignition kits.
( 10 )
$949.95
—
$999.95
$853.95
—
$898.95
On Sale
In a never ending effort to provide the highest energy density chemistry in the industry, XS Power 16 V Lithium racing battery and charger combos pair safe, maintenance-free batteries with perfectly matched high-frequency IntelliChargers for the ultimate power pack. These combos also include battery terminal hardware and instructions to get you up and running as fast as possible with as much energy as possible. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power 16 V Lithium racing battery and charger combo best suited for your application.
Not Yet Reviewed
$929.99
$855.59
On Sale
The next generation Edge Evolution CTS3 programmers will continue to include all of the great features, benefits, and extended coverage from the CTS2 product line, while adding a sleek, new exterior and cutting-edge screen. The Evolution CTS3s reprogram your vehicle's stock computer through the OBDII port, saves the factory files to easily return to stock, and then uploads the Edge calibrations. They come with multiple power levels custom tuned by a whole team of engineers, and can be installed in minutes without ever popping the hood. Edge Evolution CTS3 programmers greatly increase horsepower and torque, and not only re-tunes your vehicle, they stay mounted in the cab of the vehicle offering real-time, monitoring of vital engine and vehicle data for a complete gauge package. Edge Evolution CTS3 programmers feature: * Most comprehensive, state-of-the-art, multi-gauge/tuner touch screen display on the market * 3rd generation design is faster and more capable than ever * Power levels designed for daily driving, towing, performance, and extreme * Simple installation just plug into OBDII port--no wiring required * Monitor key vehicle parameters like transmission temperature, boost, rpm, and dozens more * Full color, 5 in. capacitive touch screen with auto-dimming * Offers crystal clear data at your fingertips * Highly customizable gauges and backgrounds * Boot-up directly to gauge screen upon key cycle * Swipe capability allows easy switching between screens as needed for towing, performance, economy, etc. * Built-in performance meter measures 0 to 60, mile times, and more * Advanced integrated data logger with export capability * Ability to add vehicle licenses to tune multiple vehicles with one product * Clear and read DTC codes * Wi-Fi updateable
( 13 )
$849.95
—
$1,049.95
$763.95
—
$943.95
On Sale
The 6-Mod Ignition Controller was originally developed for the 4.6 and 5.4-liter modular motors that were fed through a carburetor rather than an electronic fuel injection system. However, with the useful options that the 6-Mod provides, such as two rev limits, a step retard and easy control over the timing, the EFI people wanted a way to take advantage of the adjustment. The harness kit provides a splice-free installation of the MSD 6-Mod Controller to factory equipped EFI vehicles making installation a snap. All of the connectors plug directly to the factory units so there is no cutting or splicing of your factory wires. Once installed, the 6-Mod allows users to advance or retard the factory's timing curve, program a step retard for use with nitrous systems or even map out a timing curve through a laptop by using MSD's Pro-Data+ software.
( 4 )
$899.95
$808.95
On Sale
MSD Pro Mag 44 ignition coils are a key part of MSD's Mag 44 ignition system for pro-level drag cars. There's more than a pound of high-quality copper wire wound around the molded DuPont Rynite core in every one, which allows them to handle the 44 amps of output from the system's companion magneto. These coils deliver 50,000 V of long-duration spark to the plugs to ensure that the nitro is ignited. For maximum vibration protection and reliability, the windings and all internals are completely wrapped in rugged epoxy. They're not for use with the Pro Mag 12.
Not Yet Reviewed
$1,399.95
$909.95
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 329 )
$849.95
$763.95
On Sale
The Edge EZX module with Insight CTS3 is the ultimate performance upgrade for your 5th Gen RAM Cummins, offering total control over your truck with power adjustability on-the-fly. With easy installation, improved fuel economy, better towing performance, and feature control through the industry's first smartphone app, you'll be amazed by what EZX can do for your truck. Compatible with both Standard and High Output engine variants, the throttle response and drivability are exactly what you want and need. This module is completely plug-and-play and leaves no trace within the system when removed, helping to keep your warranty intact. Engineered and developed specifically for the daily driver and towing application, EZX is a safe, emissions-friendly upgrade you'll wish you would've made sooner. With gains as much as 60 hp and 130 lbs.-ft. of torque, the EZX can be adjusted while driving through your factory steering wheel controls, allowing you to fine-tune your driving experience at your fingertips. Using the innovative smartphone app available for download through your app store (available for both Android and IOS), you gain even more access to your truck's features, including: calibrating for tire size and gear ratio changes, throttle pedal sensitivity, max cruise control speed, exhaust brake/tow haul button recall, TPMS settings, engine temperature protection, gear display, fog lights with high beams, and even a turbo timer! EZX app also enables you to read and clear trouble codes, check your emissions readiness status, and perform a manual DPF regen cycle. For the absolute best driving experience, pair EZX with the Edge Insight CTS3 to stayed informed of everything going on under the hood. EZX + Insight CTS3 kits give you everything you need to stay 'in the know,' including vehicle-specific A-pillar display mounts for factory fit and finish. Product features: * All-new EZX module and downloadable smartphone app * Insight CTS3 offers you the visibility to always know what going on under the hood * Includes vehicle-specific A-pillar mount for sleek OE styling and perfect CTS3 positioning * The EZX will allow you to control Power Levels and Engine High Idle through your steering wheel controls on-the-fly. All other features are controlled, enabled/disabled, or adjusted through the smartphone app.
( 1 )
$1,119.95
—
$1,299.95
$999.95
—
$1,006.95
On Sale
When tested against a competitor's coil, the MSD Pro Power coils produced 33 percent more current at the plug. They have an oil-filled insulated polyester case, an extra-tall high-tension spark plug tower to stop voltage leaks, and rubber shock mounts. They're designed for drag race use only, with MSD 7 and 8 Series ignitions.
( 41 )
$999.95
$898.95
On Sale
The 2019-2022 (22.5+ refresh not supported at this time) GM gas trucks have been locked down since their introduction. Owners of these trucks have been waiting patiently for a tuning solution, and DiabloSport has delivered in a big way! The new 9225-R kit includes an industry-leading Trinity 2 on-dash tuner, along with the locksmith device and harnesses required to unlock both the ECM and TCM in your truck. Once unlocked, the Trinity 2 offers up tunes for 87, 91 and 93 octane fuels, as well as two transmission tunes to choose from. Beyond the preloaded tunes, DiabloSport offers a host of user adjustable parameters, like throttle response, speed limit, tire size, and of course, DFM disable! They've even added some new features for drivers of these newer trucks, like the ability to recall your last mode setting, or to retain your auto-start-stop setting. And it doesn't stop there with T2. The full color, 5 in. touch screen allows you to keep an eye on all your vital engine data. The on-screen gauges deliver all the info you want to see, in real time. Of course, it can also record data for playback on our DV2 software for further analyzation. T2 also enables you to set up virtual alerts, and supports the Expandable Accessory System (EAS) for adding and logging additional external sensors. The device is internet updateable, either through DiabloSport's Update Agent software or through its built in WiFi. Get power you can feel—with DiabloSport! DiabloSport Trinity 2 GM E90/T93 unlock kit features: * ECM and TCM unlock included * Unlock and tune at home * Preloaded tunes for multiple octane levels * Full-color 5 in. touch screen * Support for 5.3L and 6.2L V8 applications with 6, 8 or 10-speed transmissions * Disable Dynamic Fuel Management for full time V8 operation * Throttle Boost setting for adjustable throttle feel * Adjust speedometer for larger tires (26 – 38 in.) * Calibrate speedometer for gear change (3.42-5.13) * Remove speed limiter for increased top speed * Adjust engine rev limiter for increased RPM range (+/- 400 rpm) * Adjust engine idle speed in Park/Neutral and Drive * New 'Keep Auto Stop Start Setting' allows you to disable the system using the button on the dash—and it stays that way! * New 'Keep Drive Mode Setting' allows you to select a drive mode and it will remember that mode next time you start the truck! * Customizable gauge layouts and background images * Supports DiabloSport's Expandable Accessory System * Includes windshield mount
Not Yet Reviewed
$949.95
$853.95
Modal Header