Availability
Showing In Stock Items. Show All 25 Items.
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$151.70
—
$290.15
$136.53
—
$261.14
On Sale
These PerTronix replacement Flame-Thrower ignition modules feature the Hall effect integrated circuit triggered by a special magnetic sleeve fitted to the distributor shaft, which results in stable timing and precise spark distribution. They use a powerful micro-controller with dwell algorithms that allows the modules to adjust the dwell angle to maintain peak energy throughout the entire rpm range, increasing both the high and low rpm performance. Keep your distributor running smoothly and flawlessly with one of these PerTronix replacement Flame-Thrower ignition modules.
( 78 )
$135.25
—
$223.30
$121.72
—
$200.97
On Sale
Get some serious protection from exhaust heat by installing a set of Taylor Extreme Series Spiro-Pro spark plug wire sets. They're the finest high performance street and race wires available today. These replacement wires have maximum firepower without radio interference, and provide up to 10 times less resistance than standard resistor core wire. Spiro-Pros are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone distributor boots with grips; and ceramic spark plug boots that can withstand up to 2,000 degrees F. Taylor Extreme Series Spiro-Pro spark plug wire sets are available in multiple terminal and boot end options, as well as your choice of colors.
( 26 )
$149.05
—
$160.20
$134.14
—
$144.18
On Sale
Mallory Pro Sidewinder spark plug wire sets are the company's most advanced wires. Their special construction provides the RFI suppression needed for electronic ignition, radio, and computer operation without interference—and at the same time allows the type of ignition system performance previously available only with Mallory Pro wires. The high-temperature silicone jackets can withstand more than 500 degrees F. Pro Sidewinders are available in ready-to-use sets cut for specific applications, or extra-long universal sets. Features: * Low 300 ohm resistance spiral core delivers high energy output for maximum spark at the plug * Great RFI suppression meets the demands of today's on-board electronics, such as electronic ignition, sound systems, and computer controls * 8mm ozone-resistant red silicone jacket repels water, oil, grease, and fuel—and withstands temperatures up to 500 degrees * Available in ready to install kits for various applications or universal V8 kits
( 33 )
$199.95
$129.95
—
$149.95
On Sale
Flame-Thrower spark plug wires from PerTronix deliver a "high performance" look to your engine compartment, along with true high performance! They're available in universal or application-specific sets; assembled or not; for a variety of engines; with different distributor terminal and spark plug boot end options; multiple colors, sizes, and more. Features include: * Low 500 ohm per foot resistance * Silicon jackets to resist high temperatures, moisture, oil, and chemicals * EPDM (Ethylene Propylene Diene Monomer) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility * Two current paths for reliability and redundancy
( 118 )
$112.45
—
$145.85
$101.20
—
$131.26
On Sale
PerTronix MAGX2 Ceramic boot wires are designed to prevent burnt wires from the high temperatures generated by your performance engine. Each wire is constructed from two layers of ultra-high temperature silicone and rated up to 600 degrees F. The ceramic boots provide protection to direct heat up to 2,000 degrees F. Available in universal sets with straight, 45 or 90-degree boots, these kits include the distributor boots and terminals for both male and female style distributor caps. Additional notes: * Two paths for the current: Features a spiral wound stainless steel alloy wrapped around a carbon impregnated fiberglass center core * Low 500 ohm per foot resistance
( 4 )
$145.85
$131.26
On Sale
Mallory HyFire V ignitions offer a modern twist on a familiar name! Needing no introduction, the HyFire ignitions feature modern electronics ready to deliver a powerful punch packed inside retro-style cases. These capacitive discharge ignitions supply multiple sparks at low rpm for a clean idle and quick throttle response. And since the HyFires provide powerful spark through redline, a built-in adjustable rev limiter will help tame your beast in case of a missed shift or driveline failure. The rev limiter is adjustable in 100 rpm increments with easily adjustable rotary dials. Features include: * Modern capacitive discharge ignition technology * Retro design for classic good looks * Connects easily to points, amplifiers, and magnetic pickup distributors * Adjustable rev limiter for over-rev protection * Multiple sparks at low rpm for improved starting, clean idle, and snappy throttle response
( 11 )
$255.99
$230.39
On Sale
AEM Electronics shunt current sensors are versatile and reliable current sensors ideal for automotive EV (Electric Vehicle) applications. They offer high accuracy, digital output, and rugged construction, making them excellent choices for demanding environments where precision and reliability are essential. The Isabellenhutte shunt-based current sensors are capable of accurately measuring DC current, and are available with a measuring range of 1,000 or 2,500 amps. Both have a compact, lightweight design, making them easy to install in tight spaces. They are also highly configurable, with a range of options available for calibration, output scaling, and more, allowing for precise customization to meet the needs of your specific application. One of the key features of AEM Electronics shunt current sensors is their CAN bus 2.0a interface, which allows for easy integration with existing control systems. The interface provides digital output of the measured current, making it easy to incorporate into a variety of control and monitoring applications. Additional features: * Monitor batter stack voltage, intermediate circuit voltage, and relay functions * Temperature compensation and calibration * Galvanic isolation of 1000 V DC * Internally verified current measurement * Can be used on the high or low side of the battery
Not Yet Reviewed
$349.95
$192.95
On Sale
MSD launch control module selectors are designed to help drag racers achieve more consistency while staging. MSD has incorporated an adjustable low-rpm stage selector with a 3-step module selector. They allow the driver to adjust his launch rpm in 100 rpm increments from the driver's seat, based on changes in track conditions.
( 3 )
$368.95
$239.95
On Sale
ACCEL Truck Super tune-up kits have it all! Everything that you need to super-tune your pickup, van, or SUV is in there, including a custom-fit wire set, a distributor cap and rotor, and C-Cut performance spark plugs. Most kits include the 8mm Extreme 9000 wire sets, which feature a low-resistance Ferro-Spiral core and heat-reflective coated spark plug boots rated to 1,200 degrees F. Some inline 6-cylinder applications use the 5000 Series wire sets where extreme heat is not a problem. The distributor cap and rotor are precision-molded from impact-resistant, high-dielectric strength compounds and have brass or copper inserts (depending upon your application) and stainless steel contact springs. In addition, the race-proven C-Cut performance spark plugs deliver maximum burn efficiency for improved performance and reduced emissions.
( 178 )
$237.95
—
$262.95
$144.95
—
$178.95
On Sale
PerTronix Flame-Thrower upgrades your stock coil to something with more wallop! Flame-Thrower coils deliver more than 40,000 V of spark energy to your plugs for fuller, more complete combustion. They're available in a variety of primary resistance ohm versions, with either oil-filled canisters—which keep their low-resistance windings secure and cool for reliable long-term performance—or epoxy-filled canisters for extra vibration protection. Flame-Throwers are available in chrome or black (epoxy, black only). Order the style and options preferred for your application.
( 519 )
$135.25
—
$276.90
$121.72
—
$249.21
On Sale
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 662 )
$121.45
—
$154.90
$109.30
—
$139.41
On Sale
PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 356 )
$272.10
$244.89
On Sale
Slip on a set of PowerCables spark plug wires from JBA Performance Exhaust to up the game of your ride! These plug wires feature 100 percent silicone jackets and unique boot ends that are designed to offer maximum clearance, while withstanding severe wear and tear for a longer lifespan. Don't put old spark plug wires on your new fully equipped engine when you can add JBA Performance Exhaust PowerCables spark plug wires for better performance and the reliability you expect! Features and benefits: * Extra thick diameters * Ultra-low resistance design * Wire wound mag conductors * Custom tailored lengths with cylinder I.D. labels * Improved under hood appearance * Resistant to heat and abrasion * Improved performance through ignition system * Superior Electro Magnetic Interference (EMI) suppression
( 55 )
$112.45
—
$167.60
$101.20
—
$150.84
On Sale
ACCEL Motorcycle's hybrid design electric voltage regulators are available for most Harley-Davidson® applications and do not require any rewiring or special mounting. Heavy-duty, solid-state circuitry and years of technology have produced regulators with quality that is second-to-none and reliability that you can depend on year after year. All solid-state regulators are available in a choice of great looking finishes.
( 2 )
$237.95
$130.95
On Sale
ACCEL Motorcycle's Single Fire Super coils deliver all of the great features of their dual fire brothers, like a faster rise time, higher voltage, and maximum energy to the spark plug. They're available in a choice of finishes.
( 8 )
$249.95
$137.95
On Sale
ACCEL Motorcycle's Dual-Fire Super Coils are designed to deliver the maximum amount of spark energy, faster rise times, and most importantly, 45 percent higher voltage to the plugs than the OEM coils. They are designed to mount in most stock locations and will fit under most OEM and aftermarket coil covers. Two available models cover both point-triggered and modern electronic ignitions.
Not Yet Reviewed
$218.95
$120.95
On Sale
Molded in impact-resistant thermoplastic, these ACCEL Motorcycle Power Pulse coils feature everything that your V-Twin needs from a coil. They offer higher spark voltage, faster rise time, and longer spark duration.
Not Yet Reviewed
$184.95
—
$224.95
$101.95
—
$123.95
Modal Header