Availability
Showing In Stock Items. Show All 60 Items.
On Sale
Accurate ignition timing is one of the most vital adjustments you can make to your engine. Proper timing can mean the difference between winning and losing a race or even blowing an engine (as a worst case scenario). MSD Timing Tapes help you to recognize the importance of the timing. They come with eight different tapes to fit common balancers ranging from 5.25 in. to 8 in. in diameter. These tapes are marked off in one degree increments from 14 degrees ATDC to 64 degrees BTDC and are printed on a tough, chemical resistant material. Not only do the MSD Timing Tapes help you get an exact timing setting, they allow you to see exactly where the Total timing is set. Remember, the Total timing is just as critical, if not more, than the initial timing and the MSD Timing Tape will help you ensure that it is set accurately.
( 127 )
$8.28
$7.45
On Sale
Mr. Gasket timing tabs are precision-manufactured and bolt on using your existing timing cover bolts. They're made from quality materials, with a pleasing finish that will complement any engine. They'll work with either factory or aftermarket timing covers, so you're covered either way.
( 49 )
$10.03
$9.03
On Sale
These bolts are made of a Grade 8 alloy and are heat-treated for extra strength. They feature a high hex head to prevent socket slippage and an extra-thick washer to allow for a more accurate, uniform torque.
( 8 )
$15.07
$9.80
On Sale
Add a little pizzazz to your engine with Mr. Gasket chrome valve cover breathers. These custom chrome breathers keep your crankcase properly vented and add a little shine under the hood. Mr. Gasket valve cover breathers are available in push-on or push-in styles.
( 47 )
$11.95
—
$16.22
$7.77
—
$9.70
On Sale
Crown Automotive rocker arm hold-down bolts are high-quality steel bolts made to fit specific applications. These pivot bolts are used to secure your rocker arm shafts when the old bolts break, become corroded, or have damaged threads. Crown Automotive is a leader in replacement parts for many vehicles.
( 6 )
$2.99
$2.69
On Sale
Use Mr. Gasket valve cover grommets to ensure a positive oil seal. These grommets are made from neoprene and are available to fit most stamped or die-cast valve covers.
( 28 )
$7.51
—
$11.05
$6.08
—
$7.18
On Sale
If your oil filter connector has stripped threads, it can cause a major oil leak. Replace a worn or aging oil filter adapter connector with a new one from Crown Automotive to keep your engine running properly and your garage floor and driveway clean. These connectors are direct replacement OE-style oil filter adapter parts.
( 10 )
$6.99
$6.29
On Sale
Crankcase vent tubes and elbows are relatively inexpensive items that help maintain the performance of your engine. Crown PCV (positive crankcase ventilation) vent tubes and elbows are offered in several styles for many Jeep, Dodge, and Ram applications. They provide effective removal of blowby gases, keep pressure at safe levels, and work to prevent oil leaks. Ensure your engine operates efficiently with Crown PCV vent tubes and elbows.
( 11 )
$1.99
—
$13.99
$1.79
—
$12.59
On Sale
Mr. Gasket baffled breather grommets are designed to virtually eliminate oil breather blowby. No tools are required for installation, as the baffled grommets simply replace the stock grommets. They are made to fit most valve covers that use 1.22 in. O.D. x 1 in. I.D. grommets. These grommets will not work with stud girdles, as they extend 1 1/4 in. into the valve covers.
( 9 )
$7.50
$6.75
On Sale
Replace your old oil filler cap with a chrome plated cap from Mr. Gasket. They are available in a variety of attachment styles to suit your needs, and they add a fresh look under the hood.
( 18 )
$11.44
—
$11.95
$6.57
—
$10.30
On Sale
These Professional Products replacement harmonic balancer pilot spacers are designed for use with all small block Ford Professional Products harmonic balancers. They are made from durable nylon for high performance reliability.
( 3 )
$8.99
$8.09
On Sale
Replace your old head bolts with Crown Automotive cylinder head fasteners. Head bolts withstand huge clamping loads and forces in their fight to keep the heads tightly sealed against their gaskets and the block. These heavy-duty fasteners are designed to hold parts together tightly. They're crafted and built to OEM specs for proper fit, form, and function. Whether you're repairing a blown head gasket or rebuilding a motor, order the Crown Automotive cylinder head fasteners designed to fit your application.
( 9 )
$2.99
—
$4.99
$2.69
—
$4.49
On Sale
Crown Automotive valve locks are keepers! The stamped steel parts are small but necessary, and offer the proper fit and function you expect and need. Their engine valve spring retainer locks are available for many specific Jeep, Dodge, Ram, Chrysler applications.
Not Yet Reviewed
$1.99
—
$4.99
$1.79
—
$4.49
On Sale
When your original seals become hard and brittle, replace your valve cover grommets with Crown Automotive quality replacement parts for your Jeep. They are well-made, a snug direct fit replacement, and will install easily. Your seals may look fine, but if you're noticing a little oil on top, stop that leak with grommets from Crown.
( 17 )
$2.99
—
$4.99
$2.69
—
$4.49
On Sale
These gleaming, chrome-plated, push-on breather/oil filler caps from Mr. Gasket fit over your oil filler tube. They have a side fitting for easy PCV hose hook up.
( 3 )
$12.93
$7.11
On Sale
Why reuse your old dowel pins when you have machine work done on your block? I can't think of a good reason, especially when these Mr. Gasket dowel pins are inexpensive and readily available. They are made from high quality steel, precision machined and case hardened for accurate cylinder head alignment.
( 4 )
$17.19
$9.45
On Sale
Engine braking (using one's gears to slow down) puts peak stress on the lower end bolts. Crown Automotive replacement connecting rod bolts are made of sturdy steel and can withstand greater pressures when properly torqued to the correct specs. Quality rod bolts are so crucial in engines that spin, and Crown is an industry leader in superior aftermarket parts.
( 2 )
$4.99
—
$9.99
$4.49
—
$8.99
On Sale
Crown Automotive valve springs are available for a variety of applications. For over 50 years Crown has been supplying quality replacement parts at competitive pricing. So, whether your project is a vintage Jeep or newer Chrysler minivan, Crown valve springs will provide the correct fit and function to keep your engine's valvetrain operating properly.
( 1 )
$5.99
—
$10.99
$5.39
—
$9.89
On Sale
Achieve accurate timing and optimum performance for your vehicle's engine with Professional Products timing pointers. These universal timing pointers will fit all Ford FE V8 engines. They are intended to be used with the larger diameter 7.5 in. dampers, such as Professional Products models or the 427 FE high performance model. They are made of steel with a natural finish.
( 6 )
$9.99
$8.99
On Sale
These steel valve cover clamps from Mr. Gasket help distribute bolt pressure more evenly, for better sealing. They're available in several styles, and some come with bolts.
( 3 )
$10.29
$9.26
On Sale
Pushrods are one of the internal engine parts that can bend or experience metal fatigue over time. Crown Automotive steel replacement rods will help you with maintenance or a complete engine rebuild. These rods are available in a variety of lengths for proper fitment on your application.
( 4 )
$3.99
—
$8.99
$3.59
—
$8.09
On Sale
Clean air in, exhaust air out—Crown Automotive valves fit your vehicle with quality and value you can count on. Maintaining efficient engine power depends on the operation of the intake and exhaust valves. These Crown replacements are made from quality materials to provide long-lasting service. Valves are available for a wide range of Jeep and Dodge models, in particular.
( 2 )
$6.99
—
$9.99
$6.29
—
$8.99
On Sale
Crown Automotive retainers are keepers! The stamped steel parts are small but necessary, and offer the proper fit and function you expect. Their engine valve spring retainers are available for many specific Jeep, Dodge, Ram, and Chrysler applications.
Not Yet Reviewed
$2.99
$2.69
On Sale
J&L's 3.0 oil separator is a solid built, multi-stage filter system that assures clean air to flow to your intake. They also offer replacement parts and components to maintain optimal performance in your vehicle's setup. J&L Oil Separator Co. oil separator O-rings are the ideal replacements to prevent leaks. They provide the same fit and performance as the originals they are replacing. For proper servicing of your oil separator, choose parts you know will be correct from J&L Oil Separator Co.
( 1 )
$10.00
$9.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
