Availability
Showing In Stock Items. Show All 21 Items.
On Sale
AFR's 335cc BBC Enforcer cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 509 to 540 cu.in. operating below 6,500 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring seats, and AFR's one-piece 8mm 21 4N stainless steel valves. Order the cylinder heads recommended for your year/make and engine application.
( 5 )
$1,023.75
$921.38
On Sale
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 165 )
$975.50
—
$1,119.50
$877.95
—
$1,007.55
On Sale
Shutting down your vehicle's fuel-saving cylinder deactivation system has its advantages. If your AFM lifters are failing or if you're doing performance upgrades, Summit Racing™ offers cylinder deactivation delete combo Pro Packs that will allow your vehicle to run on all cylinders and have full power at all times. Select the kit designed for your vehicle. Cylinder deactivation delete Pro Packs include: * ICT Billet LT lifter valley covers * Summit™ Performance LS7 hydraulic lifters * Summit™ lifter guides * BTR Gen V LT VVT cam timing bolts * ACDelco crankshaft front seal * ACDelco water pump gaskets * Mahle head gasket set * Fel-Pro head bolts * ACDelco harmonic balancer bolts
Not Yet Reviewed
$777.89
—
$880.89
$762.89
—
$865.89
On Sale
AFR 175cc Small Block Mopar Blue Hornet cylinder heads, part of their Performance lineup, feature an "as cast" surface on the intake and exhaust runners, as well as the combustion chamber for optimal performance, and an enhanced water jet design to ensure superior cooling in crucial areas. These innovative heads offer exceptional value, available as a "no parts" head or fully assembled with the premium components found in AFR's top-tier cylinder heads. They are a perfect choice for anyone looking to upgrade from factory iron pieces. Select the AFR Mopar head(s) preferred.
( 1 )
$933.45
$840.10
On Sale
Engineered for maximum performance, the new E-Tec Series aluminum cylinder heads fit all small Chevys with Vortec-style intake manifolds. They incorporate Edelbrock's new high-quench 64cc combustion chamber design, which promotes a more uniform atomization of the air/fuel mixture for increased power. Available with 170cc or 200cc intake runners, these cylinder heads are assembled with one-piece stainless steel valves, 1.46 in. valve springs, retainers, and locks. The E-Tec models accept either centerbolt or standard valve covers, and work with most exhaust manifolds and headers. Match your vehicle specs to the correct Edelbrock head for precise fitment.
( 13 )
$936.50
—
$975.50
$842.85
—
$877.95
On Sale
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,065.50
—
$1,106.50
$870.00
—
$995.85
On Sale
Now available from Holley are LS engine swap accessory drive systems. Included are accessories and pulleys that are manufactured by OEM part suppliers for durability and direct bolt-on installation. Order the kit that's best suited for your vehicle and engine application. Features and facts: * Universal brackets fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets--thus reducing cost and complexity compared with competitive products * Simple, dedicated installation kits allow easy fitment to Corvette, F-Body, or truck drive offsets * Accessories, tensioner, and pulleys are manufactured by OEM suppliers and many of the parts are used on production vehicles today
( 34 )
$849.95
—
$949.95
$763.95
—
$853.95
On Sale
Summit Racing™ forged crankshafts offer maximum strength and the best value for your dollar! Our crankshafts are non-twist forged from certified 4340 steel. They are put through several stages of heat-treatment, and then stress-relieved and shot-peened to provide the strength and reliability you demand for your high performance application. Each journal is micro-polished and a .125 in. radius is used for increased strength. Summit Racing™ forged crankshafts help you get the most in value and performance.
( 10 )
$889.99
—
$1,029.99
$849.99
—
$949.99
On Sale
RaceTec's AutoTec line of forged pistons offers high-quality, precision manufactured options at competitive pricing. The primary material used for AutoTec pistons is 4032 high-silicone aluminum alloy which is extremely durable, has great wear resistance, a low expansion rate, and is very low in friction. The most common applications for AutoTec pistons include muscle car restorations, performance street rods, as well as many spec racing classes. They can also withstand mild nitrous kits, small turbos, or superchargers. A large selection of sizes and styles is available. Choose the proper fit for your application build. Additional features for most pistons in the AutoTec line: * CNC Precision machined ring grooves * Top ring land gas distribution groove to enhance performance and improve ring seal * Wrist pins, pin fitting, wire locks, broached pin oilers, and accumulator groove are included * Diamond turned skirts
( 1 )
$837.00
—
$1,082.00
$753.30
—
$973.80
On Sale
RaceTec pistons are the highest quality, precision manufactured options available made from forged or billet 2618 aluminum alloy. Utilizing the latest in CAD software and modern CNC machining centers, it is extremely durable and perfect for your high-horsepower application. RaceTec's in-house design and dyno-proven forgings ensure the strongest and lightest piston for your requirements. They offer a long list of sizes and styles. Choose the proper fit for your build. Features for most RaceTec pistons: * CNC Precision used in every manufacturing operation * Valve pockets machined for oversized valves and high lift cams * Critically machined ring grooves * Top ring land gas distribution grooves to enhance performance and improve ring seal * Wrist pins, pin fit, wire locks, broached double pin oilers, and accumulator groove are included * Diamond tooling used throughout production, including ring grooves and skirts
Not Yet Reviewed
$1,053.00
$947.70
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 104 )
$1,599.95
$879.95
On Sale
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$875.99
—
$1,199.99
$788.39
—
$1,079.99
On Sale
BTR Platinum valve spring kits are dual-spring kits, highly recommended when upgrading to an aftermarket camshaft. Each assembly was created to fill the need for high performance—and comes with quality dual-valve springs, titanium or chromoly retainers, locks, seals, and locators for stock or bronze guides. Build a better high performance cam with BTR valve spring kits! Order the material and stem seal color you prefer, and the model recommended for use with your engine application.
( 17 )
$999.99
$899.99
On Sale
The 2.0T EA888.4 found in the MQB EVO / MK8 platform has possibly the most underwhelming engine cover to grace the 2.0T since its inception generations back. Some vehicles even came with no cover at all due to the fact the flimsy and floppy factory cover could pop off and catch on fire. APR fixed this with a new ridged carbon fiber design that's drop dead gorgeous. Available in Gloss Carbon Fiber Twill, and Exotic Gloss Forged Carbon Fiber, the new covers are sure to turn heads. They match the overall shape and theme of the factory cover, but ooze aesthetic appeal, thanks to the carbon fiber materials, red and black accents, and of course, the world-renowned APR logo plate. The engine covers look right at home in an otherwise stock engine bay, but shine when paired with an APR intake system and matching intake cover. Simply plug and play, no tools necessary! Of course, it doesn't affect emissions, and some on the internet have even suggested the covers may add horsepower, at least more than stickers do Additional features: * Significantly enhances the appearance of the engine bay * Reduces weight by 42 percent over stock (MK8 Version) * Enhances vehicle performance with weight reduction * Reduces weight over the front axles * Optimizes weight distribution * Emissions compliant
Not Yet Reviewed
$899.95
$808.95
On Sale
Wiseco Powersports Garage Buddy engine rebuild kits are complete with components made from premium materials. They include a complete crankshaft assembly, OEM quality main bearings, all necessary gaskets, seals, o-rings, forged piston kit, and hour meter. The crankshafts feature double-forged connecting rods designed to provide the smoothest rotating assemblies possible. Having a complete bottom-end that's made of 100 percent forged material will give you peace of mind that your motor will last. Order the engine rebuild kit designed for your dirt bike, ATV, and UTV model.
Not Yet Reviewed
$984.99
—
$1,016.99
$886.49
—
$915.29
On Sale
Ford 4.6L/5.4L modular 3-valve engines found in 2005 and newer Mustangs are all the rage. So the question on everyone's mind becomes, "How can I further improve the performance of these powerful engines?" COMP Cams XFI VSR Modular 3V (Valve Springs Required) Camshafts deliver a great power improvement over stock levels. These cams are the next step up from the COMP Cams NSR (No Springs Required) Cams and represent a major upgrade in power production. When compared to the NSR, stock valve spring compatible cam series, the VSR cams offer a substantial power gain in the higher rpm ranges. To achieve this, a high-lift design that requires a COMP Cams Beehive Valve Spring upgrade was created to maximize power within the limits of the OEM unmodified cam phasers. These new VSR camshafts are available for both naturally aspirated and supercharged engines, with two levels available in each series; one designed for maximizing mid-range power and torque, while the other maximizes top end horsepower. The performance secret behind these camshafts is in the extensive dyno testing that allowed them to determine precise cam timing events. Combining these optimized timing events with a high-lift lobe design offers substantial improvements in both power and throttle response. Designed to work flawlessly with the factory VCT, which is programmed to retard the cam timing above 4500 rpm, the new COMP Cams XFI VSR Ford 4.6L/5.4L Modular 3V Cams optimize both mid and high rpm performance.
Not Yet Reviewed
$1,028.95
$823.16
On Sale
The COMP Cams XFI SPR Ford 4.6L/5.4L modular 3V (Springs & Phaser Mods Required) camshafts are the best way to achieve the most power and torque increases possible with the popular Ford Modular 3V engine. These designs are the next step up from the COMP Cams VSR (Valve Springs Required) cams. When compared to the VSR cams, the SPR cams offer additional mid-rpm power increases as well as substantial power gains in the higher rpm ranges. In addition to increases in horsepower, you can also expect another 800-1000 rpm of useable engine speed and an awesome sounding idle lope to match. To achieve this extra level of performance, lobe profiles and timing events were specifically designed to work with the factory variable cam timing (VCT) system cam phasers for all 2005 and newer Ford Modular 3V engines. These cam phasers were modified with the required COMP Cams Cam Phaser Limiter kit to restrict their movement to no more than 20 degrees. This simple modification gains additional piston to valve clearance, allowing for much larger cam designs. This results in cams that not only maintain low and mid-range power, but have incredible high rpm performance as well, all while maintaining the benefits of cam phasing. As noted by the COMP Cams engineering staff during extensive dyno testing, these camshafts provided the biggest power and torque improvements of any cam series they've ever tested in the Ford Modular 3V engine.
( 1 )
$1,028.95
$823.16
On Sale
Wiseco powersports piston kits include your rings, piston pin, and circlips. Wiseco has a decade of experience producing quality pistons for dirt bikes, ATVs, snowmobiles, outboard marine engines, and motorcycles. Their piston kits provide strong, lightweight pistons with optimized designs that improve engine efficiency and maximize your torque and throttle response. Plus, Wiseco powersports piston kits are produced right here in the USA. It's time to blaze your own trail with Wiseco powersports piston kits.
( 6 )
$1,019.97
$917.97
On Sale
Standard Motor variable cam timing solenoids are direct-fit OE replacements for your vehicle's original components. These solenoids effectively restores engine horsepower and torque curves while reducing emissions and improving vehicle efficiency. Standard variable cam timing solenoids have been manufactured to exceed OEM specifications for dependable, accurate, maintenance-free operation.
( 4 )
$855.99
$770.39
On Sale
RaceTec offers AutoTec II forged aluminum pistons for a wide range of applications, including many Ford and Chevrolet small block engines from 1967 and up. These dish or dome style replacements are available in a variety of size configurations. Additional details: * Manufactured on 2618 material forgings that will accept mild blown or nitrous applications * CNC precision used in every manufacturing operation. Valve pockets machined for oversized valves and high lift cams * Critically machined ring grooves for 1.2, 1.2, 3.0mm rings * Top ring land gas distribution grooves to enhance performance and improve ring seal * 990-2800-51-15C wrist pins, pin fit, wire locks, broached double pin oilers, and accumulator groove are included * Diamond tooling used throughout production including ring grooves and skirts
Not Yet Reviewed
$938.00
$844.20
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
