Availability
On Sale
FUELAB high-flow, one-way check valves are designed to deliver maximum flow with minimal restriction and pressure drop. Featuring -6 AN, -8 AN, and -10 AN male inlets/outlets, 350 gph flow capacity, cross fuel compatibility, and billet aluminum construction, these advanced engineered FUELAB valves allow for easy installation and prevent flow back after pump shut down. The check valves are rebuildable, have fluorosilicone seats and seals, and a maximum pressure rating of 200 psig.
( 5 )
$83.00
—
$91.00
$74.70
—
$81.90
On Sale
Aeromotive billet fuel rails are built for maximum fuel flow and ease of installation. They deliver optimal injector supply with minimal hydraulic fluctuation and will feed up to 3,000 hungry horses. The fuel rails feature ORB-08 ports with compact connections and positive leak-free sealing. Full-size ports at the end of the rails insure proper fuel flow. Additional inlet and outlet ports are provided where required for plumbing convenience. Steel mounting brackets are custom engineered for each application, combining a solid durable mounting platform that ensures a correct fit. Aeromotive fuel rails are CNC-machined and include a great looking anodized finish. Order the kit recommended for your vehicle.
( 14 )
$67.35
—
$1,729.40
$60.62
—
$1,556.46
On Sale
With Holley Sniper throttle bodies, Holley engineers went back to the drawing board to build the ultimate air valve for your engine! They feature enlarged bore sizes, allowing for increased airflow to support your higher horsepower needs. A progressive throttle pulley enhances low-speed drivability, and a double return spring provides solid and secure throttle control feel. These units are maximized for your application, with a 4-bolt style mounting pattern; most models include bolts and gaskets. Order the throttle body designed for fitment with your year/make and engine family.
( 39 )
$349.95
$192.95
On Sale
If you're upgrading the intake manifold on your LS engine, then you'll also want one of these MSD Atomic throttle bodies. They feature a parabolic design for precise control, smoother off-idle response, and improved part-throttle drivability. The throttle bodies are manufactured from billet aluminum, with a stainless steel shaft and contoured inlet profile—which outflows the competition's big bore throttle bodies. A robust throttle cam assembly uses a 3-plate design for smooth operation, while the dual ball bearing shaft offers less shaft twist and better signal stability.
( 2 )
$999.95
—
$1,349.95
$549.95
—
$742.95
On Sale
MSD Atomic EFI billet fuel rails are the perfect complement for your Atomic AirForce intake manifold. Whether you're looking for just rails, or complete kits with all the necessary plumbing--these fuel rails will have you looking for any excuse to pop the hood. They feature a bright dip, black anodized finish with laser-etched logos and a 5/8 in. diameter fuel passage flow capacity for high-horsepower applications. Make your engine look as good as it performs with MSD Atomic EFI fuel rails. Features, specs, and parts may include: * Fuel rails are machined to accept large -8 (3/4 in.-16) O-ring fittings * Includes mounting brackets and hardware * Includes four -6 to 3/4 in.-16 O-ring adapters
( 1 )
$249.95
—
$338.95
$137.95
—
$186.95
On Sale
These Professional Products Power throttle bodies are made from permanent mold castings of 356 aluminum and feature a hand-fitted butterfly plate for ideal idle control. These Power throttle bodies are offered in a polished or satin finish and are available for several applications.
( 1 )
$28.99
—
$168.99
$26.09
—
$152.09
On Sale
ACCEL Performance fuel injectors provide precise control of fuel delivery and atomization for increased power, improved throttle response, and better fuel economy. They feature either a high or low-impedance design to function accurately with your vehicle's ECU. ACCEL fuel injectors come complete and ready for installation with precision-molded O-rings and fine-mesh fuel strainers. More product features and notes: * Utilize a new low-mass disc design that ensures a spray pattern for ultra-fine atomization and improved burn efficiency * Higher than stock flow rates may require reprogramming
( 219 )
$88.45
$57.49
On Sale
Aeromotive fuel pressure sensor adapters allow the installation of Aeromotive high-flow fuel rails on stock engines when keeping the stock returnless fuel system. They're manufactured from billet aluminum and are black anodized for protection. Aeromotive fuel pressure sensor adapters provide the proper sealing port, bolt pattern, and mounting hardware to accept the stock Ford fuel pressure sensor, or couple it directly to the Aeromotive high-flow fuel rail. Order the model recommended for your vehicle.
( 4 )
$12.70
—
$134.20
$11.43
—
$120.78
On Sale
Restore proper engine function with Standard Motor TechSmart throttle bodies. These electronic assemblies will maintain the correct volume of airflow into your engine. Each of these units features a butterfly valve, which is electronically controlled by the ECU to precisely open and close for the correct regulation of the fuel/air mixture. Many feature cast aluminum housings with an exact fit for an easy installation. Standard Motor TechSmart throttle bodies offer durable, reliable performance that have made Standard Motor Products an industry leader for more than 95 years.
( 10 )
$73.99
—
$862.99
$66.59
—
$776.69
On Sale
Holley Terminator X Stealth 4150 EFI throttle bodies provide part of the puzzle for piecing together your EFI system or if your current throttle body suffered damage. They eliminate the need to buy an entire EFI kit to get the service part you need to get back on the street or the track, supporting up to 650 hp on naturally aspirated engines or 1,250 hp with forced induction setups. Holley offers Terminator X Stealth 4150 EFI throttle bodies in your choice of three quality finishes to match your build.
Not Yet Reviewed
$1,099.95
$714.95
On Sale
COBB Tuning 1050x fuel injectors provide increased fuel flow, while maintaining stock idle and drivability with proper tuning. Want to run E85, or need more fueling for your specific application? COBB 1050x fuel injectors are the ticket; simply add the injectors, fuel pump, tune, and you're off to the races. Corrosion-resistant internals make these injectors compatible with all known fuels, and their replaceable inlet filter extends service life. Features include: * Nominal flow rate of 1065cc/min at 3.0 Bar (43.5 psi) using gasoline at 52 degrees C (125 degrees F) * Maximum differential fuel pressure of 10.0 Bar (145.0 psi) * Electrical connector—USCAR * Works with stock fuel rail * Matched sets with dynamic flow rate variance within 1 percent * 14mm bottom O-ring * Data supplied for tuning injectors with Accesstuner Software
Not Yet Reviewed
$625.00
$562.50
On Sale
Steeda's billet 6061 aluminum intake spacers are specifically designed to give you more plenum volume for increased horsepower. The swirl design helps to promote airflow by breaking the surface tension of the incoming air. Kits include instructions, gaskets, and mounting hardware.
( 5 )
$84.95
—
$104.95
$76.46
—
$94.46
On Sale
Want to retain your LS-1 style injectors when using your MSD Atomic AirForce intake manifold? The components in these MSD AirForce fuel rail adapter kits will allow you to do just that! Made from quality materials, the adapter kits utilize the latest technology to meet or exceed stringent quality requirements. Order the kit recommended for your vehicle application.
( 1 )
$56.45
$31.05
On Sale
These Professional Products fuel rails are offered in two kit styles. The Basic kits include the rails, mounting brackets, and mounting hardware, and in some kits, fittings. The Complete kits include those same parts plus a complete set of fittings, a fuel crossover hose, and where needed, a fuel pressure regulator. All kits have stainless steel screws, nuts, and washers, and where non-aluminum mounting brackets are used, they are made of stainless steel as well.
Not Yet Reviewed
$179.99
$161.99
On Sale
MSD Atomic AirForce throttle body adapters are designed to attach an OEM LS1/LS6 factory throttle body to an MSD Atomic AirForce polymer intake manifold. They're made from quality materials and install onto the MSD Atomic AirForce with no modifications.
( 1 )
$77.85
$58.39
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$399.95
$259.95
On Sale
Attach your throttle cable to your LS engine with one of these MSD Atomic AirForce intake manifold throttle cable brackets. They're manufactured from quality materials and are designed to bolt directly to the MSD Atomic AirForce intake manifold. The brackets include stainless steel mounting hardware to complete the installation.
( 3 )
$59.25
$32.59
On Sale
Holley Sniper throttle body spacers provide additional clearance. Topping a Sniper EFI fabricated intake manifold with your stock throttle body may mean that a little more room is needed for proper operation. These spacers will do the trick. They can also be used with stock manifolds to provide additional horsepower and throttle response. Holley Sniper throttle body spacers are machined from billet aluminum (with different finishes) and include O-rings with hardware. Order the model recommended for your vehicle application.
Not Yet Reviewed
$105.95
$58.95
On Sale
Holley hooks you up with the required brackets when upgrading to EV1/Bosch-style performance injectors on select applications (not required for many LS1 and LS6 applications.) They offer solutions for both standard and tall injectors. Save yourself a lot of time and effort by getting your project or restoration done right with the Holley fuel rail adapter brackets designed for your application.
Not Yet Reviewed
$90.05
$49.53
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 28 )
$371.99
$271.99
On Sale
Holley fuel injector O-ring seals are designed to keep your system leak-free. They are made of rubber and will resist high temperatures and chemicals. The O-ring seals work for all Holley fuel injectors and fit GM Delphi multi-port injectors.
( 3 )
$26.38
$14.51
On Sale
AEM CD-7 plug-and-play adapter cables make CD dashes the perfect racing displays for track day enthusiasts who want to be able to see engine and vehicle data but are still running a factory ECU. For CD dash owners with CAN OBD-II who are already using the dash and receiving channels from a data logger or other CAN-enabled device, you can now add additional channels through the OBD connection with no additional wiring!
( 1 )
$40.28
$22.15
On Sale
Holley has all of the throttle body service parts that you need to keep your EFI system in great working order. Their high-flow EFI throttle body throttle plate kits include four plates and eight screws for installation.
Not Yet Reviewed
$29.45
$16.20
On Sale
Holley offers intake manifold hardware kits for a variety of Chevrolet engine applications from 1997 and up. The installation hardware is available in a silver or black finish.
Not Yet Reviewed
$54.39
$29.91
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
