Availability
Showing In Stock Items. Show All 111 Items.
On Sale
Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), Edelbrock high-tech progressive throttle linkage, a fuel line, and intake manifold gaskets. These kits are available in your choice of natural or the popular EndraShine finish.
( 7 )
$1,865.95
$1,492.76
On Sale
For maximum power with exceptional drivability, transplant the power of fuel injection into your vehicle with Painless Performance fuel injection harnesses. All kits include straightforward instructions and TXL high-temperature, color-coded, and labeled wire for ease of installation. All fuel injection harnesses are 100 percent quality-tested on OmniScanners to ensure the viability of the circuits. Harnesses for both GM and Ford applications are available and they use genuine original equipment connectors for trouble-free installation and operation.
( 94 )
$1,299.99
$1,169.99
On Sale
If you're seeking exciting performance out of a drop-in-and-go unit, then you need Fleece Performance Cheetah FMW HX35 turbochargers. They feature a high-flow turbine wheel, a 63mm FMW compressor, and reduced EGTs. These turbos do not require specialized tuning, and yet they provide quick response, excellent overall drivability, and support up to 650 RWHP. Whether you want more seat-of-the-pants performance, or torque for towing, Fleece Performance Cheetah FMW HX35 turbochargers have you covered. Important application information: Customers with 1994-2002 vehicles need to look at the pictures of part numbers FLE-FPE-HX35-GTC, -LWG, and -SWG and compare the wastegate orientation and bracket on stock units to find the correct turbo. Refer to the Notes section for additional information.
Not Yet Reviewed
$1,699.00
$1,444.15
On Sale
Fleece Performance CP3K fuel pump kits are a valuable lesson in supply and demand. Simply put; your diesel engine's demand for more fuel cannot be supplied by your stock CP3 pump, thus its' time for a new supplier--CP3K. These modified pumps are engineered to eliminate the factory fuel flow restriction that usually begins at 3,000 rpm. Your stock pump at this point starts losing fuel flow and rail pressure, which equates to loss of horsepower when you need it most. Reverse the trend; maintain the desired fuel rail pressure through your entire rpm range with cost-effective Fleece CP3K fuel pumps.
Not Yet Reviewed
$1,299.00
—
$1,349.00
$1,104.15
—
$1,146.65
On Sale
Fleece Performance Cheetah Holset turbochargers are 100 percent drop-in, bolt-on, and enjoy big top-end power units. These turbos provide quick and smooth throttle response, lower EGT's, and stock-like spooling with 40 to 45 psi operating range. They use a high-flow turbine wheel and Fleece's 63mm billet compressor wheel in order to support up to 650 rwhp. Give your diesel truck the kind of bolt-on performance most vehicles only dream of—with Fleece Performance Cheetah Holset turbochargers!
( 3 )
$1,847.50
$1,570.38
On Sale
Fleece Performance offers Bosch CP3 fuel pumps for a wide range of vehicles—including many Chevrolet and GMC diesel trucks. These are drop-in replacements for your stock injection pump and each pump includes a new snout O-ring. There are many signs that a factory fuel pump is failing; and replacing the part is essential, as it conveys the required quantity of fuel from the tank to the engine at the necessary pressure. Order the CP3 fuel pump recommended for your application.
Not Yet Reviewed
$1,279.00
$1,087.15
On Sale
AWE Tuning Performance intercoolers are 37 percent larger than stock. The high-flow bar and plate style aluminum units have resulted in intake temperatures reduced by up to 55 degrees F and improved drop pressure resistance through the core. If your engine runs hot, tackle the high intake air temps with a Performance intercooler. Drivers have experience double-digit gains in horsepower and torque! Order the model recommended for your vehicle. Additional product details: * Forced induction * Perfect fitment, guaranteed * No cutting or grinding of car or brackets * Some models include silicon intercooler pipe * Mounting brackets included * Fits securely behind stock crash bar
Not Yet Reviewed
$1,650.00
—
$1,755.00
$1,476.31
—
$1,570.26
On Sale
Summit Bucks
Mishimoto air-to-water performance intercoolers are built with cast aluminum end tanks that are precision TIG-welded to a robust bar-and-plate core. The cast end-tanks reduce potential failure points, making them more reliable against possible leaks than cut and welded tanks. Order a Mishimoto air-to-water performance intercooler for performance gains and peace-of-mind reliability. Available in a multiple powdercoated finishes
( 1 )
$1,489.95
—
$1,770.95
$1,276.95
—
$1,593.86
On Sale
Summit Bucks
Mishimoto Performance intercoolers are available for a variety of universal and direct-fit applications. They feature all-aluminum construction and TIG-welding for increased durability. High intake temperatures can reduce performance and potentially cause engine damage if left unchecked. These intercoolers are available in different styles and sizes to enhance airflow and protect your mill. Order the model best-suited for your vehicle.
Not Yet Reviewed
$1,119.95
$1,007.96
On Sale
APR Coolant Performance Systems are massive, front-mounted intercooler upgrades that dramatically reduce intake air temperature, minimize heat soak, and provide increased performance. They're up to 140 percent larger than the stock unit and feature a self-bleeding cooling circuit to ensure continual peak operating performance. The systems are easy to maintain and fully integrated into the factory cooling circuit. This upgrade is highly recommended at every stage. Order the model designed for your vehicle application.
Not Yet Reviewed
$1,499.95
$1,348.95
On Sale
Summit Bucks
Maximize your ride's performance with a Mishimoto intercooler! These high performance intercoolers significantly lower air intake temperatures, while safely increasing horsepower for small and large turbo applications. Constructed from 6061 aluminum and precision TIG-welded, Mishimoto intercoolers feature sleek styling in a choice of colors for the ultimate in good looks. Whether you want to show it off or go with the popular sleeper look, Mishimoto makes an intercooler to give your engine--and your style--a boost!
( 2 )
$1,115.95
—
$1,775.95
$1,004.36
—
$1,598.36
On Sale
Summit Bucks
Mishimoto intercooler and pipe kits let your engine breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle just about anything. Mishimoto performance intercoolers offer increased core volume and fin surface area, which results in increased flow, reduced outlet temperatures, and the ability to generate gains in horsepower and torque. Intercoolers are available in black or silver. Pipes are available polished or with a black powdercoat. As with all their products, the Mishimoto intercooler and pipe kits are backed by their signature Mishimoto Lifetime Warranty.
Not Yet Reviewed
$1,143.95
—
$1,818.95
$1,029.56
—
$1,537.95
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 28 )
$1,249.95
—
$1,499.95
$1,123.95
—
$1,348.95
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 9 )
$1,349.95
—
$1,599.95
$1,213.95
—
$1,438.95
On Sale
Holley EFI LS Hi-Ram intake manifolds are designed for your high performance race engine. Big cube and high-rev applications without height limitations are the intent for these manifolds. The modular design of these Holley Hi-Ram intake manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Hi-Ram intake manifolds from Holley.
( 39 )
$1,149.95
—
$1,299.95
$1,033.95
—
$1,168.95
On Sale
FiTech Go Street EFI 400 hp self-tuning fuel injection systems with Force Fuel systems make the switch from carburetor to EFI about as easy as it gets. Good for up to 400 hp, these 4-injector throttle bodies simply swap out your current 4-barrel carburetor for EFI performance. You don't have to mess with the ignition at all. The Force Fuel system helps quench its thirst with easy hookup and versatile mounting. FiTech Go Street EFI 400 hp and Force Fuel system combos are too easy not to go for! Order the model with options best suited to your application. Includes: * FiTech Go Street EFI 400 hp self-tuning fuel injection system * FiTech Force Fuel system
( 18 )
$1,235.99
—
$1,491.99
$1,112.39
—
$1,342.79
On Sale
Aeromotive Pro-Series 5.0 gpm brushless gear pumps are engineered from the ground up for winning performance. In fact, they're the single highest-flowing electric fuel pumps on the market. These efficient pumps utilize a spur gear design, paired with a brushless motor, to deliver 5.0 gpm at 60 psi. Their inline flow-through design features contoured port machining and no shaft seals, while offering low-amp draw, excellent heat dissipation, and high-pressure capabilities. Lots of power needs lots of fuel; Aeromotive 5.0 gpm brushless gear pumps will feed your hungry high performance machine.
( 2 )
$1,762.80
$1,586.52
On Sale
Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? The new Holley Sniper 2 fuel injection upgrade kits are designed to do exactly that! Included with each Sniper 2 plug-and-play upgrade system is an adapter solution that connects your existing Sniper EFI wiring harness to a Sniper 2 throttle body in minutes. Simply remove your Sniper EFI throttle body from the intake manifold, unplug all connectors, reinstall the Sniper 2 throttle body, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choice, and enjoy the benefits of Sniper 2 EFI. The #1 EFI conversion system just got better! Introducing Sniper 2 EFI—a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion simpler, more reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will self-tune with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Four total upgrade kits are available: polished and black, with or without external fuel pressure regulator (required for Sniper 2). Upgrade kit features: * Update your Sniper EFI to the new, improved Sniper 2 in less than one hour! * Eliminates the need to rewire your existing installation; one step, plug-and-play upgrade to a Sniper 2 * Improve your ride with the Sniper 2, including wireless connectivity, smooth throttle feel, improved RF resistance, and a hidden wiring harness. * Reuses existing coolant temperature and oxygen sensors * Female -6 AN O-ring fittings for a tight seal * Overall height is only 3.280 in. to fit under most hoods * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI of regulated fuel supply * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Sniper 2 is part of the Sniper EFI complete ecosystem * Available with fuel system kits: that include an adjustable external regulator, fittings, and a 3 ft. section of fuel hose, allowing you to easily mount your regulator in the engine bay Additional NEW features: * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 21 )
$1,149.95
—
$1,399.95
$1,033.95
—
$1,258.95
On Sale
EFI conversions made easy--FiTech Go Street EFI 400 hp systems are true carburetor replacements. And the price is a "Go" as well! Good for up to 400 hp, these 4-injector throttle bodies simply swap out your current 4-barrel carburetor for EFI performance. You don't have to mess with the ignition at all. It's too easy not to go for it--FiTech Go Street EFI 400 hp systems. Features include: * Self-tuning fuel injection * Latest Bosch 4.2 wideband oxygen sensor * ECU is mounted on throttle body * Universal base fits any 4-barrel manifold * Throttle linkage suits most transmissions * Three fuel inlet connections * Voltage control fuel pump control * Wet flow technology * Swirl spray annular discharge design * Built-in fuel pressure regulator * Designed for applications making at least 6 in. of vacuum at idle
( 219 )
$1,125.99
—
$1,319.99
$1,013.39
—
$1,187.99
On Sale
Holley Sniper BBD 2-barrel fuel injection systems offer not only exceptional throttle response and outstanding power gains over a carburetor, but you can also gain timing management. Put an end to cold start issues, hesitations, vapor lock, and flooding. Enjoy all the benefits of EFI by upgrading to this Holley Sniper system—with performance and economical pricing Jeep owners want! Features include: * Bolt-on BBD carburetor replacement * Engineered specifically for 1971-1986 Jeep CJ's with 258ci 6-cyclinder engines * Supports up to 350 hp with two 100 lb./hr. injectors * Throttle body mounted ECU (no extra boxes to mount) * Only four wiring connections required (battery+, battery- , switched ignition, and rpm) * Integrated ignition timing control * Simple calibration wizard * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Internal fuel pressure regulator (preset to 58.5 psi) eliminates the hassle of plumbing an external unit * Self-tuning ECU * OEM-style TPS/IAC and fuel pressure regulator * Bosch LSU 4.9 wideband oxygen sensor (provides real-time fuel map learn) * Clamp-on oxygen sensor kit and all hardware for installation
( 6 )
$1,349.95
$1,213.95
On Sale
Holley Sportsman Model 4500 Dominator carburetors feature the patent pending new Holley Gen 3 main body, which is 5/16 in. taller than the previous generation! This new height allows for larger radius air entries to deliver smoother flow—which equates to improved throttle response and consistency. An extended air cleaner flange is incorporated for easy air scoop attachment when using the available air scoop adapter. Other features include all-aluminum construction, tunable billet metering blocks, throttle position sensor mounting points, and knurled (hand adjustable) curb idle screws. Each calibration has been dyno and track tested to deliver proven performance! Key features of the Holley Sportsman Model 4500 Dominator carburetor: * All-aluminum construction saves 3.8 lbs. over original models * Shiny with billet aluminum metering block and black hardware * Designed for use on Drag racers, Pro Street, or any high-horsepower engines * Calibrations optimized for today's race engines and new fuels * Fully machined from venturi throat to throttle bore for predictable and repeatable performance * Annular boosters deliver excellent signal and throttle response * Screw-in air bleeds offer precise tuning capabilities * Metering blocks feature improved durability, true gasket sealing, and adjustability (power valve channel restrictors, intermediate restrictors, and idle feed restrictors) * Dual 50cc accelerator pumps provide the perfect amount of fuel from idle to full throttle * 4-corner idle allows you to precisely control your idle system * Clear sight windows on fuel inlet side of bowls for easy and safe fuel level adjustments * Notched float and jet extension are installed * 5/8-18 in. inlet threads offer a large variety of plumbing options (uses standard 4500 fuel inlet spacing) * Factory-ready TPS mounting points for use with data acquisition systems * Knurled primary and secondary curb idle screws allow for easy idle adjustment without the use of tools * Contoured hex head squirter screws for streamlined airflow * Progressive secondary link installed for perfect off-the-line launches; no linkage parts under the carburetor (1:1 wire link included in kit) * 100 percent wet-flow tested by Holley technicians to assure carb arrives ready to run * Compatible with the Gen 3 Dominator 4-hole billet spacer
( 10 )
$1,249.95
—
$1,299.95
$1,123.95
—
$1,168.95
On Sale
Holley EFI LS Mid-Rise intake manifolds are designed for your high performance race engine. They're an excellent choice for street and performance street/strip applications. They're intended for big cube and high-rev applications without height limitations. The modular design of these manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Mid-Rise intake manifold bases from Holley.
( 7 )
$1,149.95
$1,033.95
On Sale
Get big-time performance with Quick Fuel Q-Series 4-barrel carburetors with high-flow main bodies, which include either down-leg or annular boosters, screw-in idle and high-speed air bleeds, accelerator pump discharge nozzles, and a blended venturi area. These carburetors have CNC-machined billet metering blocks with 4-stage emulsion to provide more precise fuel metering, improve throttle response, and give a more uniform fuel performance curve. With so many great benefits and their blend of performance and drivability, it's no wonder that these Quick Fuel Q-Series carburetors are the popular choice. So, go ahead--throttle it up with Quick Fuel!
( 46 )
$1,199.95
—
$1,399.95
$1,078.95
—
$1,258.95
On Sale
FiTech has some of the best-engineered and priced throttle body systems on the market. Their LS EFI 500HP fuel injection systems bring incredible ingenuity to the market. FiTech fabricated many aluminum parts for these systems, including the low-profile 92mm billet throttle body, high-volume billet fuel rails, and an intake manifold with 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mates 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touchscreen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. A suction cup mounting bracket puts the controllers at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. FiTech LS EFI 500HP fuel injection systems with transmission controller provide impressive power and performance, while allowing you to save a little green for your next tires. Additional features: * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touchscreen hand-held controller with data log features
( 41 )
$1,806.00
$1,444.80
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
