Availability
On Sale
Edelbrock's Performer carburetors feature 2-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves—and the primary venturi booster is a bottom-feed design for smoother acceleration and better drivability. An Owner's Manual is included with every Edelbrock carburetor. The manuals consist of two sections: Section 1, Theory of Operation and tuning procedures which will help you be prepared to develop your own individualized calibration. Section 2, Tuning procedures will take you through a step-by-step procedure that will enable you to achieve a desirable calibration. For added ease of tuning, a Calibration reference chart for your model of carburetor is also included. Performer carburetors are available with a variety of options; select the model that best suits your needs.
( 1474 )
$414.95
—
$590.95
$373.46
—
$531.86
On Sale
Edelbrock AVS2 Series carburetors are the next generation of carburetors. Featuring annular flow primary boosters, adjustable secondary air valves, and a new calibration, these AVS2 carburetors offer improved idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered when the carburetor transitions from idle to full throttle. Each annular booster features eight, equally spaced orifices to improve fuel metering. The improved flow metering makes this carburetor ideal for use with a wide variety of small-block and big-block engines with either dual- or single-plane intake manifolds.
( 831 )
$428.95
—
$619.95
$386.06
—
$557.96
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 314 )
$227.95
—
$652.95
$205.16
—
$522.36
On Sale
Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 125 )
$2,266.95
—
$3,239.95
$2,040.26
—
$2,915.96
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 570 )
$216.95
—
$659.95
$195.26
—
$565.16
On Sale
These Performer RPM FE intake manifolds from Edelbrock are designed for high-performance street Ford FE V8s with standard low/medium-rise or Edelbrock Performer RPM FE heads. Their dual-plane constant cross-sectional area design builds low and mid-range acceleration, while optimized runner paths make top-end horsepower. These manifolds have a provision for adding the PCV or breather flange at the rear, and no exhaust crossover passage.
( 37 )
$736.95
$663.26
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$296.95
—
$1,070.95
$267.26
—
$963.86
On Sale
Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street applications. Power bands range from 3,500 to 7,000 rpm, on up to 4,500 to 8,000 rpm. There are applications for small block and big block engines, as well as for 2-barrel and 4-barrel carburetors. Some manifolds accept standard restrictor plates and carb adapters.
( 61 )
$425.95
—
$562.95
$383.36
—
$506.66
On Sale
Go retro with Edelbrock Performer RPM LS1 intake manifold kits. These kits give you the opportunity to use a carburetor on your originally computer-controlled engines. Performer RPM LS1 kits include a wiring harness and an MSD ignition controller (compatible with 24x and 58x) which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and transmission bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits.
( 10 )
$1,027.95
$925.16
On Sale
The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires
( 16 )
$827.95
—
$1,047.95
$745.16
—
$943.16
On Sale
Edelbrock Pro-Flo 4 XT EFI systems provide you with a high performance Pro-Flo XT-style intake and 90mm throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 XT EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled XT intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2.5-bar TMAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 21 )
$2,645.95
—
$2,986.95
$2,381.36
—
$2,688.26
On Sale
Edelbrock Performer RPM Vortec intake manifolds are based on their highly successful Performer family. They're designed for street rods, marine applications, and a host of engine swaps using small block Chevy V8s with 1996 and later Vortec (L31) cast iron heads or Edelbrock's E-Tec aluminum heads. They accept single square bore carbs only and have an external water bypass boss machined into the front of the water crossover for use on 1996 and later Vortec production engines. Their 1,500 rpm to 5,500 rpm power band makes them an excellent choice for a wide range of setups.
( 21 )
$389.95
$350.96
On Sale
Edelbrock Victor Jr. carbureted intake manifolds are capable of supporting up to 600 hp. They accept a standard 4-barrel square bore carburetor. The manifolds are made of high-quality aluminum and feature a natural finish. The required electronic timing control module is sold separately .
( 9 )
$432.95
—
$1,297.95
$389.66
—
$1,038.36
On Sale
Edelbrock Performer RPM LS1 intake manifolds are manifold-only packages that allow you the opportunity to use a carburetor on these originally computer-controlled engines. Edelbrock LS1 intake manifolds are manufactured from aluminum and offer you the ability to maximize torque and increase the power curves of your engine. Are you going back to the traditional carburetor? Rely on Edelbrock Performer RPM intake manifolds.
( 12 )
$407.95
—
$638.95
$367.16
—
$511.16
On Sale
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$339.95
—
$482.95
$305.96
—
$386.36
On Sale
Edelbrock E-Force supercharger kits use a positive displacement supercharger that is capable of producing over 500 hp. These kits include the supercharger with Eaton internals, a manifold, drive pulleys, a belt, and all necessary items for installation. Edelbrock E-Force superchargers are designed to provide more horsepower per pound of boost than their competitors, from off-idle through the rest of the rpm range. Plus, their internal bypass valve practically eliminates parasitic loss, consuming less than 1/3 of one horsepower at 60 mph. NOTE: They are not compatible with HEI distributors.
( 8 )
$3,644.95
$3,280.46
On Sale
Edelbrock E-Force GM truck and SUV Stage 1 Street Legal supercharger kits up the power in your late model GM truck or SUV. These GM Supercharger systems are specially designed for each application and will allow you to boost your towing performance to impressive levels. These systems feature long intake runners for maximum low end torque making them ideal for towing and off-road performance applications.
( 5 )
$7,931.95
—
$10,803.95
$7,138.76
—
$9,723.56
On Sale
Edelbrock Victor Jr. EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds are designed to replace the stock mono blade throttle bodies and give you throttle body options; fuel rail set, fuel injectors, fuel pump, and regulator are all required (each sold separately). If you decide not to maintain your EFI setup, you can also use these Victor Jr. EFI intake manifolds to convert to a carburetor.
( 10 )
$562.95
—
$713.95
$484.76
—
$571.16
On Sale
Edelbrock Ford flathead intake manifolds are designed to give your flathead engine more power. They are made of aluminum and feature a natural finish. The intakes are available for dual carburetor 1938-48 engines or in a single 4-barrel version for 1949-53 engines.
( 1 )
$619.95
$557.96
On Sale
If you want to build a carbureted LS3 engine. Edelbrock's Performer RPM LS3 intake manifolds afford you that opportunity. Originally computer-controlled engines, you can top your LS3 with one of these Performer RPM manifolds and a carburetor to gain maximum power and a broad torque curve. They include provisions for a timing control module, passages for clean-look wiring, and a special throttle/transmission bracket to make these units an easy retro-fit. Go carbureted with Edelbrock Performer RPM LS3 intake manifolds.
( 1 )
$422.95
$380.66
On Sale
Victor intake manifolds make use of Edelbrock's extensive knowledge of induction technology to produce maximum power and torque and are designed for all forms of competition. These single-plane, high-rise manifolds are arguably the most popular and flexible manifolds in racing today. You'll find them on oval tracks, in drag racing, and on NASCAR engines because they boost power where these engines need it the most--from 3,000 rpm to 8,500 rpm. All Victors have extra material for port matching and are available to fit either square bore or Dominator carb flanges.
( 24 )
$476.95
—
$681.95
$429.26
—
$545.56
On Sale
These Edelbrock Buick B-4B intake manifolds are a resurrection of the popular B-4B manifolds made in the late 1960s for street use. The only change to the original design is the addition of Edelbrock's proven Performer-style mounting pad that accepts either square bore or spread bore carburetors. That addition makes these manifolds an excellent choice for both restoration and performance-minded Buick fans.
( 5 )
$573.95
$516.56
On Sale
Edelbrock Pro-Flo XT EFI intake manifolds combine a user-friendly design with the latest technology. They're manufactured from aluminum and are available in a natural, polished, or black powdercoat finish for ultimate protection. Pro-Flo XT EFI intakes feature eight equal-length tapered runners and a large plenum. The fuel-injected manifolds are designed to deliver maximum horsepower and a broad torque curve throughout the 1,500 to 7,000 rpm range. Choose the model designed for your vehicle and cylinder head style application.
( 15 )
$637.95
—
$945.95
$510.36
—
$756.76
On Sale
Edelbrock offers the perfect complement to your competition headers--the Victor Jr. CNC intake manifolds! These versatile manifolds are excellent for many applications, from high performance street to drag/Circle Track racing. The CNC-blended port exits match any competition head and also provide maximum performance for engines with standard port location and iron and aluminum cylinder heads.
( 4 )
$573.95
$516.56
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
