Availability
On Sale
Trail-Gear heavy-duty transfer case mounts can handle the abuse of rock crawling and the ultra-low torque of dual cases. Stamped out of 1/4 in. thick steel plate and then welded on a jig to ensure the best fit possible, these mounts are fitted with polyurethane bushings and coated with zinc for lasting performance and durability. Eliminate the worries of a busted T-case mount on the trails with the installation of bomb-proof Trail-Gear heavy-duty transfer case mounts.
( 5 )
$39.99
—
$149.99
$33.99
—
$127.49
On Sale
Got a broken OE rubber motor mount? Trail-Gear Bomb Proof engine mount kits offer the quality and strength you need. The base of these motor mounts is made from 1/4 in. plate. The surface plate that the motor sits on is made out of 3/8 in. material and has a Class 10.9 bolt that is mechanically locked to the engine mount plate--not just threaded in. Bomb Proof mounts are given a silver zinc plating that looks sharp and will last a lifetime. The bushings are made out of high-grade polyurethane for added durability, and the mount holes are slotted so that your install is easy. Upgrade your vehicle to Trail-Gear Bomb Proof engine mount kits.
( 9 )
$189.99
$161.49
On Sale
Outfit your front bumper with Trail-Gear winch mounts. These predrilled mounts are built from a CNC-bent 1/4 in. steel plate, and they bolt in the factory frame holes for a hassle-free install. TG built them with 2 in. receiver tubing so that you can use a receiver shackle for a pull point or a recovery point. If you're looking to build your own front bumper, Trail-Gear winch mounts are great starting points to secure your pulling power.
( 10 )
$129.99
—
$199.99
$110.49
—
$169.99
On Sale
Mount up and hit the trails with Trail-Gear front or rear lower shock mounts. They're ideal for use on a straight axle swap and are made of thick 3/16 in. plate steel. The curved bottoms weld directly to the axle housing, horizontally or vertically, with 1/2 in. mounting holes.
( 6 )
$19.99
—
$129.99
$16.99
—
$110.49
On Sale
Trail-Gear zip tie tabs are weld-on brackets perfect for securing brake lines, cables, and air lines. They are available in two styles: formed/flanged and 1/8 in. thick flat. Both are crafted from 1008 steel and are sized for 1/4 in. wide zip ties. The formed style permits lines to be tucked under the flange, while the flat tabs allow for the easy mounting of almost anything. Route lines and cables neatly through your project with Trail-Gear zip tie tabs.
Not Yet Reviewed
$5.99
—
$9.99
$5.09
—
$8.49
On Sale
Due to recent customer demand Trail-Gear now offers adjustable panhard brackets to allow for different levels of drop to fine-tune your suspension. The brackets are laser-cut from steel and formed and includes four sets of holes to mount the panhard to provide users more freedom in mounting suspension. Shipped unfinished and un-welded, these brackets can be easily trimmed down to the desired length. Welding required for installation. For a well-aligned suspension, use Trail-Gear adjustable panhard mounts.
( 1 )
$29.99
$25.49
On Sale
Trail-Gear universal shock hoop kits are long enough to accommodate extended-length shocks. They're made from 1035 DOM and precision CNC-bent to ensure the highest quality product. The shock hoops are available in different sizes for fitment on specific applications. A universal model measures 16 in. from top to bottom, and 13 in. from the weldment mounting surface to the shock eye bracket.
( 6 )
$99.99
$84.99
On Sale
Set the tone for your next adventure with Trail-Gear speaker brackets. Crafted from durable 11-gauge ASTM A36 steel and available in two styles, these brackets are engineered to keep your 6 1/2 in. or 6 x 9 in. speakers securely in place. Compatible with a wide range of aftermarket speakers, these rear speaker brackets ensure uninterrupted beats during every adventure. Replace your broken or missing speaker brackets with a pair of Trail-Gear brackets. Mounting hardware is included. Select the brackets designed for your speakers.
Not Yet Reviewed
$49.99
$42.49
On Sale
If you're installing crossover steering, the time you'll save with one of these mounting kits is well worth the investment. They make swapping to the Trail-Gear IFS steering box much easier. The heavy-duty kits feature 3/16 in. inner and 1/4 in. outer frame reinforcing plates, with angled leading and trailing edges to avoid frame cracking. You'll also receive Grade 8 bolts, crimp nuts, and dependable DOM tubing to complete the project.
( 3 )
$89.99
$76.49
On Sale
Trail-Gear shock reservoir mounts are for securing almost anything with an outer diameter of 2 or 2.5 in. They can be welded to most any size of round tubing, and TG offers them individually or with stainless steel clamps. The steel mounts are shipped raw and will require painting after welding. You can mount shock reservoir, fuel pump, fuel filter, and more with Trail-Gear shock reservoir mounts.
( 1 )
$7.99
$6.79
On Sale
Anytime a lift kit is added, certain things like brake lines and driveshafts need to be checked and often lengthened. Trail-Gear brake line mounts are designed to secure longer braided steel brake lines—which will allow your vehicle's taller suspension to travel without using the lines for limiting straps. Safely secure braided brake lines with Trail-Gear brake line mounts.
Not Yet Reviewed
$9.99
$8.49
On Sale
Trail-Gear Rock Assault 9 brake caliper mounts are bolt-on kits that are easy to install. They allow you to mount Wilwood Dynalite calipers (120-4993) on the Trail-Gear unit bearing pockets. The caliper mounts fit Spidertrax 5- and 6-lug hat, and Spidertrax 14 in. rotor applications. (Min. 17 in. wheel required.) They're available for the front and/or rear brake positions.
Not Yet Reviewed
$79.99
$67.99
On Sale
Trail-Gear offers weld-on light bar tabs, which are CNC-formed from 1/8 in. quality thick 1010 steel, coped for 1 1/2 in. or 1 3/4 in. O.D. tubing, and have 1/2 in. sized bolt holes. These Trail-Gear weld-on tabs will also make great generic weld-on tabs for things like seats, seatbelts, or just about anything else you want to mount onto a piece of tubing.
Not Yet Reviewed
$9.99
$8.49
On Sale
Trail-Gear polyurethane line clamps secure brake lines, wiring, and hydraulic hose to tubes ranging in diameter from 1 1/2 in. to 2 in. O.D. The clamps are available in several sizes and include clamp blocks. Choose the size needed for your project. Features: * Black polyurethane clamp blocks * Zinc-plated steel SAE hose clamps * Each clamp block secures up to two lines
Not Yet Reviewed
$6.99
$5.94
On Sale
Trail-Gear weld-on light bar kits provide a home for your auxiliary lights. The bars are precision CNC bent from 1 3/4 in. x .120 in. wall 1035 DOM tubing and can be welded onto many different locations to mount and protect your lights. Trail-Gear weld-on light bar kits include bar and tabs, both is shipped unpainted and lightly oiled to prevent rust.
Not Yet Reviewed
$39.99
$33.99
On Sale
Trail-Gear license plate holder kits are great for attaching your plates to aftermarket front or rear bumpers. With the included white LED light, your digits are easy to see—and most importantly, your vehicle stays legal. The bolt-on plate holders are available to clamp onto either 1.5 in. or 1.75 in. O.D. tubing. All mounting hardware is included. The steel license plate holder ships raw, unpainted.
Not Yet Reviewed
$29.99
$25.49
On Sale
Trail-Gear power steering reservoir brackets make it easy to bolt-in the reservoir on most 4-cylinder 4X4 Toyota applications from 1979-95. Includes mounting hardware. Additional details: * Side input of reservoir is a No. 6 JIC fitting and the bottom outlet to pump is a No. 10 JIC fitting * Reservoir includes cap * Brackets are fabricated from steel * Unpainted finish
Not Yet Reviewed
$14.99
$12.74
On Sale
Trail-Gear Rock Assault power steering reservoir brackets bolt right to the back of the Rock Assault reservoir and allow you to either weld the other side of the bracket to your cage (coped for 1 1/2 in. tubing) or simply butt weld it to a piece of flat stock. These kits make mounting a Rock Assault reservoir easy and efficient. Each bracket is made from 1/8 in. steel plate that is CNC laser-cut and then CNC precision-bent. Kit includes: * Bracket * 3/8 in.-16 x 3/4 in. bolts (2) * Top lock nuts (2) * 3/8 in. washers (2)
Not Yet Reviewed
$9.99
$8.49
On Sale
Trail-Gear quick-release fire extinguisher mounts allow you to quickly wield your fire extinguisher in the event of an emergency. Embedded anti-rattle steel ball bearings in the bracket ensure a tight, noise-free fit in the base. They can be mounted to round or square tubing, or to flat surfaces with the included clamps and hardware. Trail-Gear quick-release fire extinguisher mounts accommodate most fire extinguishers up to 2.5 lbs. Features: * Lightweight aluminum construction * Black anodized finish * High-visibility red anodized pull knob * Includes: -- 65-89 mm hose clamps -- 78-101 mm hose clamps -- M8 flat head screws -- M8 hex nuts
Not Yet Reviewed
$39.99
$33.99
On Sale
Trail-Gear tire mount kits are designed from durable polyurethane. They allow you to mount your tire on your tire carrier without having to line up the lug studs to the wheel. TG mounts work with any backspacing or bolt pattern utilizing a 2.75 in. to 6.25 in. center bore, and will accommodate a 1 in. diameter mounting rod. Trail-Gear tire mount kits can be incorporated into any custom tire carrier design.
Not Yet Reviewed
$39.99
$33.99
On Sale
Looking for an easy way to mount your limit straps? Trail-Gear clevis mounts enable you to quickly and easily mount a metal clevis to your rig. The weld-on brackets are made of chromoly steel, with or without mounting ears that can be welded to a flat surface or cut to profile to weld onto a tube chassis.
Not Yet Reviewed
$19.99
$16.99
On Sale
If you are looking to add an attachment point or cargo tie-down anchor to your off-road vehicle, Trail-Gear has the solution. Designed to work with Trail-Gear 3/4 in. D-rings, these mounts are made from thick steel with a 1 in. thick D-ring mount, and laser-cut for 1/2 in. hardware. They are offered in several mounting bolt patterns to better suit your application requirements.
( 5 )
$29.99
$25.49
On Sale
Trail-Gear customers tend to drive where the majority would never venture—climbing over rocks, hills, and rugged off-road terrain. Hobbies like that require occasional maintenance to the chassis and suspension. For those repairs or rebuilds, Trail-Gear axle housing upper link mount brackets provide secure attachment points. These brackets are formed and welded from silver powdercoated 1/4 in. steel for long-lasting strength. They're available for a variety of axle setups, including OEM and Rock Assault. Match your vehicle to the correct hardware application.
Not Yet Reviewed
$69.99
—
$99.99
$59.49
—
$84.99
On Sale
Trail-Gear Rock Assault double-ended ram mounting kits will take almost all the fabrication work out of mounting your Rock Assault Double Ended Ram to virtually any axle housing. The main support tube is pre-bent and can be trimmed to size and coped on the ends for a custom fit. The formed mounting plates are not welded to the tube, so you can move them to the left or right to center the ram on the axle. A support tube is included, but on certain axles additional gussets may be required.
( 1 )
$49.99
—
$89.99
$42.49
—
$76.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
