Availability
On Sale
Trail-Gear Creeper Breather bellows prevent dirt, debris, and water from getting into your axle through the stock axle housing breather. They expand and contract to accommodate the increase or decrease in housing pressure. These TG replacements are made from flexible EVA copolymer plastic, just like the originals, and will fit onto 1/4 in. O.D. tube or barbed fitting (not included).
( 1 )
$16.99
$14.44
On Sale
A good seal provides good benefits. Trail-Gear Rock Assault inner axle seals will effectively seal any axle deflection, axle misalignment, or axle runout issues that may occur. They are manufactured from a specially blended, high performance synthetic rubber that is very flexible, allowing them to seal efficiently. These TG seals can be used as replacements with Trail-Gear's Rock Assault 9 in. seal housings, as well as other popular 9 in. seal housings.
( 1 )
$14.99
$12.74
On Sale
Trail-Gear power steering fittings can handle the pressure. Be it low or high, TG has an offering of fittings to fit your specialty and OEM needs. From adapters that join your high-pressure steering hose to your IFS steering box—to elbow low-pressure barbed fittings, Trail-Gear will get you connected. Order the model needed for your application.
( 8 )
$12.99
—
$19.99
$11.04
—
$16.99
On Sale
Mount up and hit the trails with Trail-Gear front or rear lower shock mounts. They're ideal for use on a straight axle swap and are made of thick 3/16 in. plate steel. The curved bottoms weld directly to the axle housing, horizontally or vertically, with 1/2 in. mounting holes.
( 6 )
$19.99
$16.99
On Sale
Trail-Gear spindle nuts replace your wheel bearing retainer nuts. Usually, your stock nuts and star washers can be used several times, but with the added maintenance of an off-road rig, they probably need to be replaced. Choose these Trail-Gear kits that include two nuts, a star washer, and a flat index washer to get 'er done right!
( 8 )
$14.99
$12.74
On Sale
Trail-Gear tube ends can help make your chassis fabrication easier. They're designed to weld to your steel tubing so you'll have the threaded ends you need for customizing tie rods, link bars, track bars, and more without the assistance of a lathe. These smooth, steel tube ends are available in several popular sizes for your job.
( 2 )
$12.99
$11.04
On Sale
Heavy-duty rod ends are ideal for today's flexible suspension systems. Super-strong creeper joints are designed to hold up to years of punishment. However, over time rod ends will become worn and their performance deteriorates. Make an upgrade with the Trail-Gear creeper joint rebuild kits. These assemblies include one snap ring, two bushings, two washers, and grease zerk fitting. Note: You will need a press to install Trail-Gear's creeper joint rebuild kits, and will need to grease the joint after installation. Maintain your off-road machine with Trail-Gear!
( 2 )
$19.99
$16.99
On Sale
Trail-Gear door slam latch kits are spring-loaded pull latches. Each TG kit includes a 3/8 in. diameter zinc plated pin with a plastic pull knob, a 3/4 in. Grade 5 zinc plated jam nut, and a nickel plated steel plate with countersunk holes. The pin extends 7/16 in. from the aluminum body. These are the same ones they use in the Rock Defense tube doors. Build your own tube doors or rear tire carrier with Trail-Gear door slam latch kits.
( 3 )
$19.99
$16.99
On Sale
Trail-Gear has the solution for damaged brake lines. Their individual brake hard lines are pre-formed to your application, made from steel, and coated to protect against corrosion. Trail Gear brake hard lines are DOT-approved and will help to restore optimal braking power to get your back safely on the roads and trails.
( 12 )
$14.99
$12.74
On Sale
In and out of the water? Trail-Gear axle housing breathers feature an internal spring-loaded flapper valve that prevents water from entering through the breather during your water crossings. These TG models are stock replacements for old, rusted, or damaged units.
( 2 )
$19.99
$16.99
On Sale
Square or round, Trail-Gear has the U-bolts you need. Manufactured from Grade 5 steel, they are made for 3 in. O.D. axle tubes. Secure your spring packs with Trail-Gear U-bolts.
( 3 )
$12.99
$11.04
On Sale
Trail-Gear brake proportioning valve relocation brackets move your valve to a higher position. Lifting your rig causes the brake proportioning valve to improperly sense loads. These bracket kits raise your valve higher so it can correctly sense axle loads and send the right amount of pressure to your brakes. Resolve potentially dangerous braking situations with the help of brake proportioning valve relocation bracket kits from Trail-Gear.
( 1 )
$19.99
$16.99
On Sale
Trail-Gear chassis tabs have the strength to hold your project together. These beefy flat tabs are crafted from quality steel in a selection of thicknesses, widths, and hole sizes, as well as straight and coped center and offset styles to make your build a success. They come lightly oiled. Mount most anything, securely, with Trail-Gear chassis tabs.
( 3 )
$19.99
$16.99
On Sale
Looking for an easy way to mount your limit straps? Trail-Gear clevis mounts enable you to quickly and easily mount a metal clevis to your rig. The weld-on brackets are made of chromoly steel, with or without mounting ears that can be welded to a flat surface or cut to profile to weld onto a tube chassis.
Not Yet Reviewed
$19.99
$16.99
On Sale
Designed for use with TG leaf springs, Trail-Gear shackle plates are zinc plated and available in three lengths to fit your project. When you need the right parts to build or change your own shackles, Trail-Gear has all the essential pieces.
Not Yet Reviewed
$12.99
$11.04
On Sale
Trail-Gear base plates are designed to be welded to the cage tube end to provide a strong mounting base—after all, your roll cage is no place to skimp on strength! Each base plate is laser-cut in-house with Trail-Gear's own machine. They are 1/4 in. thick, with 3/8 in. bolt holes—and the plates are available in three styles: small 2 bolt, large 2-bolt, and large 4-bolt.
Not Yet Reviewed
$12.99
$11.04
On Sale
Trail-Gear U-bolt flip plates are ideal if you're doing a shackle flip, axle swap, or other lift-type change. Convert your truck to a durable, off-road-friendly round bottom setup for better ground clearance and less possibility of damaging the threads. They are designed to accommodate U-bolts that fit a 2 in. thick spring pack in the front, and 2.5 in. thick spring pack in the rear. Using new extra-heavy-duty upper plates to convert your truck to the durable, off-road friendly setup is the right upgrade if you're already buying new U-bolts.
( 2 )
$14.99
$12.74
On Sale
Trail-Gear Trail-Safe transfer case output seals are effective replacements. The lips are totally supported by a garter spring, applying constant force over the full 360 degree circumference. This prevents any deflection gaps and stops oil from bypassing the seal lip. The outer seal lip acts as a secondary seal and keeps debris and other contaminants away from the inner seal lip. The outer diameter of TG Trail-Safe seals are 100 percent rubber coated so that they form a complete static surface seal, resulting in zero leaks—and the outer flange prevents the seal from being pushed too far into the transfer case housing. Trail-Gear Trail-Safe T-case output seals also feature bi-directional double helix to keep the oil in the transfer case and water out, especially when the vehicle is on an incline.
Not Yet Reviewed
$19.99
$16.99
On Sale
Trail-Gear steering knuckle replacement components are significantly stronger than OEM standards to make the most of your newer replacement steering arms. TG should be your first choice for knuckle hardware when repairing or upgrading your high-steer system.
( 3 )
$19.99
$16.99
On Sale
Trail-Gear shift knobs allows you to replace or upgrade the look of your factory shifter. They thread right onto your stick with no drilling required. The knobs are available for a variety of applications. Trail-Gear is a globally recognized leader in design, manufacturing and distribution of off-road products for hardcore rock crawlers, racers and trail enthusiasts. Their stable includes more than 2,000 products for Toyota, Suzuki, Nissan, and Jeep vehicles—as well as builder parts and universal products. These shift knobs are quality-made to enhance the looks of your interior and your gear shifting performance.
( 1 )
$12.99
$11.04
On Sale
Trail-Gear pinion seals are direct replacements for your leaking seal. These Trail-Safe seals feature a lip totally supported by a garter spring applying constant force over the full 360 degree circumference. This prevents any deflection gaps and stops oil from bypassing the seal lip. The outer seal lip acts as a secondary seal and keeps debris and other contaminants away from the inner seal lip. The outside diameter is 100 percent coated with high-temperature polyacrylate rubber so that it forms a complete static surface seal resulting in zero leaks and maximum longevity. The outer flange prevents the seal from being pushed too far into the differential housing. This is by far the most effective pinion seal on the market, and will help you keep your favorite trails free of oil.
Not Yet Reviewed
$19.99
$16.99
On Sale
Trail-Gear power steering reservoir brackets make it easy to bolt-in the reservoir on most 4-cylinder 4X4 Toyota applications from 1979-95. Includes mounting hardware. Additional details: * Side input of reservoir is a No. 6 JIC fitting and the bottom outlet to pump is a No. 10 JIC fitting * Reservoir includes cap * Brackets are fabricated from steel * Unpainted finish
Not Yet Reviewed
$14.99
$12.74
On Sale
Trail-Gear offers rod end high misalignment spacers in a variety of sizes and angle options. These small parts increase misalignment by continuing the spherical diameter of the ball and allowing the edge of the ball to rotate into the body of the rod end. This enables greater articulation, more suspension travel, and longer life of the rod end. The inner diameter of each high misalignment spacer is smaller than the inner diameter of the rod end, so a smaller bolt is required. Machined from 303 stainless steel, the spacers are sold in pairs. (Note: Standard misalignment spacers are only used when the width of the ball is too narrow for the bracket it is being used with.)
( 1 )
$19.99
$16.99
On Sale
Trail-Gear tubing reinforcements are laser-cut and formed in-house at its headquarters in Fresno, CA. Made from 3/16 in. thick HRP&O steel with an overall length of 36 in. and a 60-degree bend, they can easily be welded onto any size tube or flat surface to add extra strength and protection to your rig. This is a simple, inexpensive and effective way to prevent damage to the more crucial and costly parts of your rig. Sold individually and shipped raw.
Not Yet Reviewed
$14.99
$12.74
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
