Availability
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$229.95
—
$368.95
$126.95
—
$202.95
On Sale
If you're unable to use a thermocouple-style assembly due to limited space availability, Racepak liquid temperature sensors are a great alternate choice. These replacement sensors are for use with Vnet modules and require the adapter harness.
( 2 )
$38.52
$21.19
On Sale
Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)
Not Yet Reviewed
$999.95
—
$1,599.95
$549.95
—
$879.95
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or devices want your V-Net system to monitor.
Not Yet Reviewed
$349.95
$192.95
On Sale
The name of the game in racing is traction, and keeping your tires firmly planted under all track conditions and surface abnormalities have become a science. Monitoring suspension deflection through shock absorber movement is the common method of tracking suspension and tire performance. Racepak users can employ these shock absorber travel sensors to monitor even the slightest amount of shock travel or tire shake. Shock travel graphs will provide you with the data you'll need to tune 'to the track' more precisely. These door car kits are available for front or rear shock travel. The front shock travel sensor kits contain two 4 in. linear shock travel sensors, two signal conditioning modules, and an analog extension cable. The rear shock travel sensor kits contain two 8 in. linear shock travel sensors, two signal conditioning modules and an analog extension cable.
Not Yet Reviewed
$1,449.95
$942.95
On Sale
When using a Racepak Pro Analog transducer box, Racepak plug-in, old-style, transducer modules are used to convert the input from various analog functions into signals that can be recognized by the recorder. Where required, a special cable is needed to connect the sensor to the transducer or signal conditioning module. Available modules include: * Pressure transducers, in ratings of 0 to 15/60/100/150/300/500/750/1500 psi * Vacuum transducer, 0-30 in. Hg * Battery voltage, 0-20 V input * Thermocouple amplifier, 0 to 500 degrees F * 0 to 5 V input, outputs 5 V to powered sensor * 0 to 5 V input, outputs 12 V to powered sensor
Not Yet Reviewed
$399.95
$219.95
On Sale
Racepak flow meters provide accurate flow readings for both fuel and hydraulic clutch systems. These general purpose turbine-type flow meters, when used along with DataLink's math channel capabilities, allow you to monitor the health of your fuel pump, as well as confirm the function of your fuel system timers and system lean-outs. Also offered in low-flow versions, those designated as low-flow are recommended for carbureted applications and are calibrated in lbs./hr. unless otherwise noted. Racepak flow meters are available constructed from aluminum for gasoline and nitromethane, and in stainless steel for methanol fuel.
Not Yet Reviewed
$1,399.95
$909.95
On Sale
Enhance the features of your existing Racepak data logger by adding one of these Racepak GPS antennas. These data logger accessories are for use with Vantage CL1, IQ3, G2X and G2X Pro data loggers to help synchronize the timing between your data logger and your other instruments.
Not Yet Reviewed
$89.95
$49.47
On Sale
Racepak USM connector cables are designed to allow easy connection of Racepak Universal Sensor Modules to a variety of data acquisition components. They are available to connect fluid temperature, rpm, shock travel, ride height, infra-red temperature, 0 to 5 V, and TI-style pressure sensors.
Not Yet Reviewed
$65.89
$36.24
On Sale
Racepak magnetic pick-up collars provide a mounting platform for up to eight magnets. This allows them to pick up driveshaft rpm faster than typical 2-magnet designs. Simply mount them on your rear-end yoke or coupler, then set up your sensor. They're available in several popular diameter sizes, and are perfect for automatic-equipped vehicles. Increase your data gathering efficiency with Racepak magnetic pick-up collars.
Not Yet Reviewed
$139.95
$90.95
On Sale
For your data recorder to be able to monitor an analog channel it must receive a signal that it can recognize. The Racepak Module PT2 convert the analog parameters to a standard 0-5 volt signal required by the recorder. The transducer module (combination sensor and signal conditioning modules) provides direct connection to the measured parameter, such as fuel or oil pressure. The signal conditioning module allows the connection of remote sensors, such as thermocouples or position sensors, to the data recorder.
Not Yet Reviewed
$399.95
$219.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
