Availability
On Sale
Help your fuel injection system keep up on measured pressures with these Holley replacement pressure transducers. They include a wiring pigtail, are available for all Holley EFI fuel injection systems, and come in different pressure ranges to suit your engine application requirements.
( 48 )
$149.95
—
$212.95
$134.95
—
$191.65
On Sale
Holley Easy Level fuel level senders use LiDAR technology to precisely measure the depth of fuel remaining in your tank and work with all Classic Instruments' fuel gauges, including short-sweep, full-sweep, and selectable ohm range fuel gauges. They also work with many other gauge brands. Compatible with tanks ranging from 4 to 39 in., setup is a breeze with the on-board buttons. Easily set empty and full tank positions, with reserve, right on your workbench before installing and then set the empty, half, and full positions on the gauge. The desired dampening rate is adjusted with dip switches right on the unit to reduce fuel slosh and gauge bounce by adjusting how fast or slow the gauge reacts to the fuel level change. Upgrade Classic Instruments' gauge sets and other brands to capture the benefits of Laser imaging, Detection, and Ranging (LiDAR) technology with Holley Easy Level senders. This exciting and innovative automotive application replaces vulnerable moving parts with a hi-tech laser. Besides the problems encountered with float setup, hitting baffles or tank wall, Easy Level eliminates having to set up the float-type sender, saving time and effort. Features: * Quickly reads fuel levels with zero contact * Easy installation with no moving parts; popular 5-bolt flange * Long life sensor and no failing floats * Easy to program the level of any tank and electronic gauge * Bolt Circle Diameter (BCD) is 2.122 in. * Output is a PWM signal for 12 V applications (10 to 20 V maximum) * Mounting hardware and rubber gasket * Maximum operating temperature of 185 degrees Note: Does not work with OE-style gauges that utilize an ohm only input
( 5 )
$124.95
$112.45
On Sale
Holley aluminum fuel cells come in a several variations for nearly every race application, and Holley's fuel gauge sending units are the correct replacements to restore consistent level readings. Offered in an 8 or 9 in. depth for 5- and 10-gallon or 15- and 20-gallon fuel cells respectively, both styles have a tube design that acts as a damper, saves space, and eliminates the need for a float arm. They are 0 to 90 ohms (empty-full) to work with most aftermarket gauges, have a standard SAE 5-bolt mounting pattern, and include gasket and mounting hardware. Holley fuel gauge sending units are E85 compatible. Choose the best fit for your fuel cell.
( 1 )
$68.25
$44.36
—
$61.45
On Sale
Holley Sniper fuel gauge sending units can be used as replacements for your existing units. Promising to be a big help during your installation, these gold iridited Sniper EFI senders are available in several ohm ranges. So, should you decide to upgrade your dash to aftermarket gauges, Holley has the right range for your project.
( 5 )
$74.95
$67.45
On Sale
Holley offers several coolant temperature sensors designed for use with their Pro-Jection, Sniper, and other fuel injection systems. They feature brass construction with 3/8 in. thread and will provide the ideal fit and function to monitor your engine's coolant temperature. Select the one designed for your system.
( 19 )
$37.46
$33.71
On Sale
Optimizing your dash solution to display your vehicle speed is simple with Holley GPS digital USB modules. The 46 in. USB cables allow you to install the digital display unit virtually anywhere on the dashboard—without the need for external sensor information. Eliminate old, noisy mechanical speedometer cables and step up to Holley's accurate GPS speedometer output module. Additional information: * USB connection for user-friendly, plug-and-play installation * Magnetic base provides for multiple mounting solutions * 10 Hz refresh rate for ultra-accurate, real-time speedometer output * Requires clear line-of-sight with the sky for satellite acquisition * Can only be used with 553-106 or 553-109 digital dashes
Not Yet Reviewed
$106.95
$96.25
On Sale
Make sure that your Holley Terminator electronic fuel Injection setup is running at the optimum level with a Terminator EFI air temperature sensor. These parts originally come with the Holley Terminator EFI kit, but over time, the sensor will need to be replaced to keep your system running smoothly and reliably. Continue with the added benefits of EFI by replacing your Terminator air temperature sensors when the time comes with genuine Holley products.
( 5 )
$31.21
$28.09
On Sale
Holley offers quality service parts for use with the Holley 8-channel EGT monitoring kits, including EGT (Exhaust Gas Temperature) probes. These thermocouple sensors provide the perfect solution for viewing and logging various temperatures, including exhaust gas and cylinder heads, to keep you in-the-know of what exactly is going on in your engine. Select the probe needed. Features and specs include: * Stainless steel over-braid cable with lead and pre-terminated connector * 1/4 in. EGT probes (pyrometer type) * 90-degree, open-end tip * Available with different length harnesses
Not Yet Reviewed
$125.95
$113.35
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$799.95
—
$1,049.95
$584.95
—
$943.95
On Sale
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 28 )
$349.95
—
$649.95
$314.95
—
$583.95
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$339.95
—
$649.95
$305.95
—
$583.95
On Sale
Holley Sniper EFI fuel tank systems will complete your EFI swap. They fit and look like an OE tank, but each Sniper tank is a direct-fit for your application, which means no modifications for you to perform. The tanks are powdercoated galvanized steel for corrosion resistance and lasting good looks. Your Holley Sniper EFI fuel tank kit will include the tank, fuel pump, fuel level sender, and internal baffling. Some kits may also include filler neck and tank straps. Sniper EFI tanks feature: * Fuel pump (255 lph) with hanger assembly gives you the fuel you need with in-tank quietness * Sender has 1/4 in. NPT supply and return line ports for easy connection and a barbed vent fitting * Fuel level sender has the correct ohm range for your factory gauges * Fuel pump and sender are recessed in the tank to provide an easy installation * EFI-style tank baffling includes a large 4.3L internal fuel tray to prevent fuel pump starvation
( 23 )
$749.95
—
$999.95
$673.95
—
$898.95
On Sale
Holley Sniper in-tank fuel pump modules are direct-fit units to drop directly into the specific vehicle application. Two modules--the Sniper 340 lph and Holley 525 lph--feature a 6061 T-6 flange that has a bright dip black anodized finish for corrosion protection and long-lasting good looks. The flanges have a 6AN O-ring outlet and return port making the plumbing connections easy. The assembled modules include a new filter sock and the lock ring to complete the installation into your stock fuel tank. Choose the module designed for your vehicle. Notes: * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for the specific application * 340 lph module supports up to 700 EFI or 900 hp carbureted * 525 lph module supports up to 1,200 EFI or 1,450 hp carbureted * Both EFI and carbureted systems will need a bypass design regulator
Not Yet Reviewed
$519.95
$466.95
On Sale
Holley OEM-style EFI fuel tank modules are designed as a direct replacement for your factory pick-up and sending unit. There's no need for modifications—and you won't have to replace your fuel tank! You can even retain the factory fuel hard line; just connect the outlet of the pump module to the hard line on your vehicle with some EFI-rated fuel hose and hose clamps. Order the model designed for your vehicle application. Additional features of Holley OEM-style EFI fuel tank modules: * Module includes a pre-calibrated fuel-level sending unit that is designed to work with the factory fuel gauge already in vehicle * Holley includes a HydraMat with its unique internal reservoir to keep fuel available at the pick-up, while also providing protection from contaminates * Fuel pressure is regulated internally and preset at 58 psi, eliminating the added expense of purchasing an external fuel pressure regulator * No return line needed (all return fuel is handled inside the tank)
Not Yet Reviewed
$530.95
—
$573.95
$292.95
—
$515.95
On Sale
Holley EFI analog display gauges use digitally-delivered information over Holley's sophisticated CAN bus or wire directly to your sending unit, providing your ride with a classic readout. Those using the bus get their data from the Holley ECU, meaning that you don't have to run wires all over the vehicle. All you have to do is run a single cable to the ECU and then daisy-chain the rest. Holley analog gauges are available to monitor a variety of automotive temperature and pressure functions, along with programmable fuel level and voltage options. Product features include: * Available with black face with white lettering or white face with black lettering. * LED dimmable backlit design with red pointers makes them easy to read day or night * All gauges are electric style and may include sending units depending on gauge type * Pointer is driven by either a high-torque internal stepper motor or internal microprocessor (depending on application) to ensure accurate movement in street and racing conditions * CNC-machined billet aluminum bezels with an anodized finish on some models * Threaded bodies allow a single bezel nut to hold the indicators firmly in place * Bezels are threaded for easy replacement with multiple bezel options available * Each is tested to ensure a top-quality, accurate gauge
( 15 )
$179.95
—
$368.95
$98.95
—
$332.05
On Sale
Holley EFI speedometer gauges complement your other instruments with precision and style. Designed specifically for use with Holley EFI systems, they can also be used as a standalone unit—and are available in two sizes, in both black and white face versions. The gauges are compatible with all Holley EFI touch screens, dashes, hand-held tuners, and other CAN devices, making them great for Holley EFI users looking to install a combination of needle gauges and LCD accessories. Holley EFI speedometer additional details: * Wire directly into the vehicle's 16-pin OBDII data link connector * Operate by receiving data from the ECU through the OBDII data link connector * 0 to 160 mph range with multi-function LCD display, including mileage/trip odometer and peak speed recall * Slim-style mounting requires very little dash space for installation * 240 degree sweep pointer from 8 to 4 o'clock makes gauges easier to read at a glance * Internal microprocessor ensures accurate pointer movement in street and racing conditions * Spin-lock ring threads to back of gauge case for simple and secure gauge mounting * CNC-machined billet aluminum threaded bezels with anodized finish
( 2 )
$599.95
$538.95
On Sale
Holley drop-in fuel module assemblies cover a wide range of vehicles and performance expectations—including dual pump designs. These replacement assemblies meet the highest-quality standards offered for increased performance and fuel efficiency. Holley drop-in fuel modules are capable of supporting 550-plus horsepower right out of the box! Dozens of models are available, with flow rate options between 50 and 277 gph. Order the fuel module recommended for your vehicle. Features may include: * Plug-and-play wiring harnesses * Integrated fuel storage and filtration technology * Built-in, pre-calibrated fuel level sensors * HydraMat filter (keeps fuel available at the pick-up during radical maneuvers and provides contamination protection) * Most models include sending unit
( 8 )
$399.95
—
$449.95
$359.95
—
$403.95
On Sale
Holley analog standalone gauges provide you with a simple yet modern way to monitor all types of engine and drivetrain functions. Their slim-style mounting requires very little depth, and all of the gauges feature dimmable LED backlighting to ensure you can always see the indicator, no matter the environment. Holley analog standalone gauges are available in a variety of data types and ranges for temperature and pressure monitoring, along with programmable fuel level and voltage options. Features include: * Designed for a 2 1/16 in. openings * Available with black face with white lettering or white face with black lettering. * LED dimmable backlit design with red pointers makes them easy to read day or night * All gauges are electric-style and include sending units depending on gauge type * Pointer is driven by either a high-torque internal stepper motor or internal microprocessor (depending on model) to ensure accurate movement in street and racing conditions * Spin lock ring threads to back of gauge case for simple and secure gauge mounting * CNC-machined billet aluminum bezels with anodized finish * Bezels are threaded for easy replacement; multiple bezel options available * Each gauge is tested to ensure a top-quality and accuracy
( 2 )
$190.95
—
$192.95
$106.95
—
$171.85
On Sale
Holley EFI tachometer gauges complement your other instrumentation with precision and style. Designed specifically for use with Holley EFI systems, they also work as standalone units. The dials are available in multiple size options, as well as your choice of black or white numerals and background face. These tachs are compatible with all Holley EFI touch screens, dashes, hand-held tuners, and other CAN devices—making them great for Holley EFI users looking to install a combination of needle gauges and LCD accessories. Holley EFI tachometer additional details: * Will work with both distributor and distributor-less ignitions without requiring any special tach adapters * Practically universal, works with most gasoline engines—and is programmable from 0.5 to 6 pulses-per-revolution (PPR) * Slim-style mounting requires very little dash space for installation * 240-degree sweep pointer from 8 to 4 o'clock makes gauges more natural to read at a glance * Internal microprocessor ensures accurate pointer movement in street and racing conditions * Spin-lock ring threads to the back of gauge case for simple and secure gauge mounting * CNC-machined billet aluminum threaded bezels with anodized finish
( 4 )
$291.95
$262.75
On Sale
If you are adding nitrous or boost to your 2010-2015 Camaro race car, Holley has the fuel pump upgrades for you, like these dual in-tank pumps. The fuel pump module design starts with a billet pump flange assembly and connects it to dual 340 or 450 LPH fuel pumps for maximum fuel delivery. The module also includes two HydraMats to eliminate fuel starvation under hard acceleration or cornering. The integrated jet pump assembly allows retention of factory drivers side fuel pickup. A new level sensor is included and pre-installed. Installation is as simple as removing factory module and replacing with Holley module. Select the dual in-tank pump model that's designed for your application. Features and benefits: * Machined, billet, anodized, laser-etch components for durability and good looks * -8AN ORB inlets and outlets (return fitting included) * Two HydraMats, one for each pump * Integrated jet pump assembly allows retention of factory drivers side fuel pickup * Have been tested to deliver stable fuel pressure down to low fuel indicator warning light * Brand new level sensor included and pre-installed to make installation as simple as removing factory module and replacing with Holley module * Outlet fitting included to connect to factory feed line * Secondary ORB port machined into flange for easy AN plumbing of feed line * Module is return-style only so a regulator must be installed
Not Yet Reviewed
$949.95
—
$1,249.95
$853.95
—
$1,123.95
On Sale
Holley electric in-tank fuel pumps provide the extra fuel required after completing other engine modifications, such as adding performance camshafts, headers, larger injectors, and so on. They use a proven gerotor-type pump and are compact enough to fit existing hanger assemblies. They're also designed for easy installation and come complete with instructions and all necessary parts, including a new strainer-type fuel filter. Dozens of models and options are available; order the fuel pump recommended for your vehicle.
( 11 )
$649.95
$583.95
On Sale
One of the most popular updates for older vehicles is swapping out the carburetor(s) for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and can be difficult to mount properly. Holley Sniper Universal EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They give you the option to install an EFI tank into a vehicle not normally offered. Features include: * Supports up to 550 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Include new tank straps
( 2 )
$949.95
$853.95
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 26 )
$1,249.95
—
$1,499.95
$1,123.95
—
$1,348.95
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 24 )
$1,649.95
—
$1,899.95
$1,483.95
—
$1,708.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
