Availability
On Sale
Holley offers their accelerator pump diaphragms for all of their carburetors. These quality pieces ensure that the job is done right and help to keep your carb functioning like new.
( 119 )
$15.88
$14.29
On Sale
Holley fuel bowl gaskets are designed to replace your standard fuel bowl gaskets. They transform jet changing into an easy process with no worries of ripped gaskets.
( 90 )
$15.88
$14.29
On Sale
Holley replacement power valves are an important component in the power enrichment circuit of Holley's performance carburetors. They operate by using engine vacuum to control their opening and closing rate. When they open, additional fuel is supplied to the main system during heavy load or under full power situations to eliminate hesitation and bogging--ensuring the smooth delivery of power without any drivability concerns. They're available in many different vacuum ranges to time the system's operation to your specific requirements, and they come in your choice of single-stage, two-stage, and high-flow designs. A gasket is included.
( 131 )
$15.88
—
$19.60
$14.29
—
$17.64
On Sale
Holley offers base gaskets for every type of Holley carburetor. From the base plate gasket to the air cleaner ring gasket and everything in between, you're sure to find what you need.
( 88 )
$13.95
$12.56
On Sale
Replace your worn or missing throttle studs with the Holley recommended carburetor throttle lever studs.
( 104 )
$13.03
—
$21.57
$11.73
—
$19.41
On Sale
Restore the performance of your high-mileage fuel pressure regulator with these genuine Holley diaphragm repair kits. You'll regain the accuracy and performance of the regulator from when it was new.
( 65 )
$11.85
$10.67
On Sale
Holley vacuum secondary diaphragms will replace your existing worn-out diaphragms. They are made from a high performance rubber material and will fit most Holley carburetors with vacuum secondaries.
( 49 )
$18.99
$17.09
On Sale
Holley has fittings to adapt different sized fuel lines to bare Holley fuel bowls, as well as hose and banjo fittings for special applications.
( 106 )
$18.99
—
$20.32
$17.09
—
$18.29
On Sale
Holley kickdown spring and bracket sets adapt your Holley carburetor for use with your Ford automatic transmission. The brackets have one mounting hole and one locator pin. They're designed for carburetors with a 30cc accelerator pump.
( 39 )
$17.78
$16.00
On Sale
Holley Sniper EFI throttle lever extensions bolt directly onto your current throttle lever, increasing the mechanical advantage of your throttle cable, or rod. This results in a significantly decreased pedal effort, and smoother pedal feel, especially at low throttle input, such as when you are leaving a stoplight. They are ideal if a stiffer throttle pedal is noticed after an EFI conversion. Features: * Direct bolt-on installation * Hardware included * Decreases pedal effort for smoother driving characteristics * Corrects poor throttle cable/rod geometry
( 64 )
$19.97
$17.97
On Sale
Holley carburetor accelerator pump check valves are made to fit most Holleys using a 30cc or 50cc accelerator pump. They feature the "umbrella" design most commonly used in performance-style carburetors.
( 10 )
$18.99
$17.09
On Sale
Holley carburetor float kits work with side-hung and center-hung Demon and aftermarket Holley carburetor floats, as well as many OE Holley, Ford, Chrysler, GM, Motorcraft, AMC, and Rochester marine carburetors. Offered in brass and Nitrophyl for internally and externally adjustable floats, they're available as primary floats, secondary floats, and secondary floats with notches that include jet extensions. Holley's wedged floats feature a reinforced float bracket assembly that allows more fuel to flow through the bracket—especially when using bottom-feed needles and seats. Technical notes for Holley carburetor float kits: * Wedged floats are designed for oval track use, so the float stays open in turns * The use of brass floats on the secondary side of Model 4160 carburetors factory-equipped with Nitrophyl floats may result in loss of fuel control and flooding if the floats contact the metering plate * You should only install jet extensions and notched floats in rear fuel bowls
( 108 )
$20.17
—
$20.32
$18.15
—
$18.29
On Sale
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetor metering block gaskets are available for a variety of Holley carburetors with and without intermediate systems. These gaskets ensure a good, leak-free seal between your carburetor body and metering blocks. Holley can give you the edge you need over the competition!
( 26 )
$16.61
$14.95
On Sale
Upgrade your carburetor's hardware for maximum performance with the help of Holley. Their needle and seat hardware kits work with all Holley carbs with an adjustable needle and seat. Also keeping style in mind, these kits are offered in gold or black. Kits include adjusting nut, lock screw, gaskets, and O-ring.
( 20 )
$11.40
$10.26
On Sale
Holley offers these throttle body gaskets as direct replacements for their throttle body systems. They're ideal for rebuilds or maintenance use.
( 11 )
$14.43
—
$29.44
$12.99
—
$16.19
On Sale
Holley standard main jets are just what you need to fine-tune your carburetor for street or race performance. Threaded for easy installation and removal, they manufacture these brass jets to high tolerances for consistency. They're available in dozens of jet and jet drill sizes for precise fitment on countless gasoline-fueled vehicles. When considering replacement parts for your carburetor, trust the expertise of Holley.
( 199 )
$13.95
—
$14.33
$12.56
—
$12.90
On Sale
Direct from Holley come these throttle lever extensions. They are designed to help relocate the throttle lever mounting point for the accelerator cable and readily accept most throttle lever studs for a simple and convenient throttle hookup.
( 25 )
$17.76
$15.98
On Sale
Holley transmission kickdown lever extensions are handy parts used to extend the lower Ford OEM transmission kickdown lever when converting from a 2 barrel to a 4 barrel carburetor or as an effective mounting point for a transmission kickdown.
( 24 )
$12.66
$11.39
On Sale
Holley HP billet fuel filter replacement elements are for use with your Holley HP billet fuel filter. They're available in your choice of a 10-micron depth media element or 40-micron and 100-micron stainless steel woven mesh elements. Ensure that your fuel filter is preventing contaminants from entering the engine. Update your old unit with a quality replacement element from Holley.
( 13 )
$23.79
$15.46
On Sale
Holley throttle lever stud bushings are designed to fit into your Holley linkage and allow you to insert the correct throttle ball stud size for your cable. They are made of nylon and include mounting instructions.
( 8 )
$13.97
$12.57
On Sale
Holley offers replacement air filter elements for a wide range of applications. They're available in different sizes, shapes, and filter materials—including paper and gauze. Keeping clean, cool air flowing through your intake is important for engine performance. When your current element is ready to be retired, order the Holley replacement model designed to fit your application.
( 2 )
$18.91
$10.40
On Sale
These Holley mechanical fuel pump covers will seal your engine off after you replace your mechanical fuel pump with an electric one. Made from steel and chrome plated, they'll add some shine to your engine compartment.
( 7 )
$20.34
$18.31
On Sale
Holley pioneered carburetors, so who better to clean them? Over time, carburetor internals and choke valves can accumulate gum, varnish, and dirt, reducing drivability and fuel efficiency. Holley Carburetor and Throttle Body Cleaner removes these deposits, restoring easy cold starts, smooth idle, and improved throttle response. It excels at cleaning throttle bodies and plates, carb linkages, PCV valves, heat risers, and other small engine components. Holley Carburetor and Throttle Body Cleaner's powerful formula dissolves grease and grime, often with no disassembly required. The formula is low VOC, so it's tough on deposits, but easy on delicate components including sensors and electronic chokes.
( 1 )
$11.79
$10.61
On Sale
Some engine swaps and racing applications do not need the heater, but elimination of the heater is difficult on the 7.3-liter Godzilla engine since the hose inlet and outlet passages are tough to plug and look like a cobbled up mess using traditional hoses, clamps, and plugs. Holley Ford 7.3L Godzilla rear block plug kits include a machined steel billet plug with O-ring seal, mounting bracket, and retaining bolt to block off the rear port with a professional look. Features: * Works with Holley's front/heater block-off kit to block all cooling ports * The plug is designed to handle high pressure and high temperatures--typical conditions of the cooling system * Easy installation without the need to tap holes or fabricate special plugs and caps * Steel plug features a clear zinc-plated finish
Not Yet Reviewed
$19.49
$10.72
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
