Availability
On Sale
Aeromotive VaporWorx KPM1500 fuel pump/returnless PWM control systems include a KPM1500 fuel pump modified with a high-pressure regulator, returnless pulse width modulation control system, and other modifications to make them work properly for most US-based vehicles. The KPM1500 features twin OEM Bosch PWM compatible pumps, fully re-engineered pump support system, robust venturi pump systems, integral safety overpressure valves, and a built-in anti-reversion/check valve, making each fuel pump very much like an OEM part. The outlet nipple has been strengthened to reduce the chances of breakage, and their operation is smooth, quiet, and easy to control. VaporWorx PWM (pulse width modulation) kit contains everything needed to drive the KPM1500 electrically in either constant/static or manifold referenced pressure modes. These kits are intended to be used as standalone control systems. No additional relays, Hobb's switches, etc. are needed. Features: * VaporWorx modified KPM1500 fuel pump module make the OEM chassis wiring plug-and-play * Approximately 71 percent+ reduction in power to the fuel pump during idle/cruise vs. running both pumps full speed all the time. Practically eliminates vapor lock/cavitation caused by overheated fuel * Fully returnless (external inline filter required) * 60-amp minimum continuous power rating in a compact controller package * Total size 4 in. L x 2.1 in. W x 1 5/8 in. H * Over-temperature shutdown with automatic reset operates indefinitely without damage * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies (where appropriate)
Not Yet Reviewed
$2,917.70
$2,625.93
On Sale
Aeromotive VaporWorx BoostWorx returnless PWM kits for ZL1 fuel pump modules have everything needed to provide a standalone, OE-type returnless fuel system with constant or manifold referenced fuel pressure. When used with the popular and affordable GM Gen5 ZL1 Camaro, C7 Corvette, Aeromotive Super ZL1, and many other GM-compatible fuel pump modules, these systems will provide constant pressure or any base pressure with a 1:1 manifold referenced (supplied MAP sensor based) fuel pressure—operating like a mechanical fuel pressure regulator would with the ECM calibrated in the same manner. The simplicity of these kits comes with connecting the supplied standalone MAP sensor to the pressurized side of the intake manifold, just like connecting a boost gauge or manifold referenced fuel pressure regulator. For constant fuel pressure simply leave the MAP sensor portion of the kit disconnected. BoostWorx ZL1 controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor
( 1 )
$525.15
—
$577.15
$472.64
—
$519.44
On Sale
Aeromotive VaporWorx ReturnX return-type PWM controllers have everything needed to provide a standalone fuel pump speed control system. Available for single or dual pump, naturally aspirated or supercharged applications, no switches, relays, or Hobb's switches are needed when using these ReturnX systems. Controllers have primary and secondary output with the primary providing sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. This leader/follower arrangement delivers a smooth ramp-up in pump speed until both pumps are at full output. For carbureted and EFI applications, simply attach the supplied standalone MAP sensor hose to a manifold vacuum source (naturally aspirated) or past the supercharger/turbocharger and make at-idle controller adjustments--the VaporWorx controller will do the rest. Select the single or dual naturally aspirated or supercharged version needed for your setup. Key features: * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent * Standalone MAP-based fuel pump speed control * Carburetor and EFI capability Benefits: * Everything needed electrically to drive the fuel pump(s) * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 40 to 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating range -- Can be used with voltage boosters -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition
( 1 )
$502.90
—
$630.20
$452.61
—
$567.18
On Sale
Aeromotive VaporWorx BoostWorx returnless PWM controllers for dual fuel pump applications have everything needed to provide a standalone, OE-type returnless fuel system. They provide a 1:1 manifold referenced fuel pressure using the VaporWorx supplied standalone MAP sensor and mounting bracket, acting just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. BoostWorx PWM dual-pump controllers feature: * Everything needed electrically to drive the fuel pump module--no relays or Hobb's switches are required * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection with automatic reset * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor * Second pump turn-on set to 4 psi * The PWM controller supports Aeromotive's line of 340 lph in-tank pump
Not Yet Reviewed
$683.25
$614.92
On Sale
Aeromotive VaporWorx BoostWorx returnless PWM controllers for triple fuel pump applications have everything needed to provide a standalone, OE-type returnless fuel system. They provide a 1:1 manifold referenced fuel pressure using the VaporWorx supplied standalone MAP sensor and mounting bracket, acting just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. BoostWorx PWM triple-pump controllers feature: * Everything needed electrically to drive the fuel pump module--no relays or Hobb's switches are required * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection with automatic reset * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Must be used in manifold referenced fuel pressure mode * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor * Second pump turn-on set to 4 psi * The PWM controller supports Aeromotive's line of 340 lph in-tank pumps
Not Yet Reviewed
$683.25
$614.92
On Sale
Aeromotive VaporWorx BoostWorx returnless PWM kits for Ford GT have everything needed to provide a standalone, manifold referenced, OE-type returnless fuel system. When used with the low-cost Ford/Motorcraft PFS1215 fuel module, the systems will provide a 42 to 60 psi base pressure with a 1:1 manifold referenced fuel pressure change for up to 25 psi of boost--just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. The system's key to simplicity is the standalone manifold pressure sensor that tells the BoostWorx controller how to adjust the fuel pressure. Simply connect the hose from the pressure sensor mount to the intake manifold, set the fuel pressure according to the need, and you're done. The controllers can also be used with any engine that needs to have a separate MAP sensor for manifold referenced fuel pressure, and they can be used in constant pressure mode by removing the vacuum line or MAP sensor wiring, and the controller will provide a constant pressure. BoostWorx GT controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability when combined with the OEM-style fuel module * A minimum 50 percent reduction in power to the fuel pump during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor
Not Yet Reviewed
$577.15
$519.44
On Sale
Aeromotive VaporWorx BoostWorx returnless PWM kits for CTS-V fuel pump modules have everything needed to provide a standalone, OE-type returnless fuel system with constant or manifold referenced fuel pressure. When used with GM CTS-V2 and compatible fuel pump modules, this system will provide constant pressure or any base pressure with a 1:1 manifold referenced (supplied MAP sensor based) fuel pressure—operating just like a mechanical fuel pressure regulator would with the ECM calibrated in the same manner. The simplicity of these kits comes with connecting the supplied standalone MAP sensor to the pressurized side of the intake manifold, just like connecting a boost gauge or manifold referenced fuel pressure regulator. For constant fuel pressure simply leave the MAP sensor portion of the kit disconnected. BoostWorx CTS-V controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor
Not Yet Reviewed
$577.15
$519.44
On Sale
Aeromotive VaporWorx BoostWorx PWM controllers for CTS-V LSA applications have everything needed to provide a standalone, OE-type returnless fuel system that meets the GM LSA crate engine fuel pressure requirements. Please note, these kits are intended to be used with the GM LSA ECM and a wiring kit for the LSA engine only. When used with the CTS-V fuel module, these controllers provide the needed manifold referenced (MAP sensor based) fuel pressure that cannot be met with traditional return-type pressure regulators. BoostWorx PWM CTS-V LSA fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, external regulators, or return lines needed -- 750 hp capable * Unmatched low fuel level capability when used with an OEM-style fuel module * Calibrated specifically for the LSA crate engine controller * A 50 percent reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness from the controller to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition
Not Yet Reviewed
$502.90
$452.61
On Sale
Aeromotive fuel pressure regulator breathers make ideal replacements (where required) for the vacuum/boost ports found on all Aeromotive bypass regulators. They're machined from quality materials and feature male threads. A sintered brass filter allows air to move into and out of the regulator cap as needed while preventing dirt and debris from entering. Aeromotive fuel pressure regulator breathers work perfectly for any application that does not require fuel pressure to be influenced by manifold pressure.
( 3 )
$9.85
$8.86
On Sale
Aeromotive VaporWorx BoostWorx PWM controllers for ZL1 LSA applications have everything needed to provide a standalone, OE-type returnless fuel system that meets the GM LSA crate engine fuel pressure requirements. Please note, these kits are intended to be used with the GM LSA ECM and a wiring kit for the LSA engine only. When used with the Gen5/6 Camaro ZL1 fuel module, these controllers provide the needed manifold referenced (MAP sensor based) fuel pressure that cannot be met with traditional return-type pressure regulators. BoostWorx PWM ZL1 LSA fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, external regulators, or return lines needed -- 650 hp capable * Unmatched low fuel level capability when used with an OEM-style fuel module * Calibrated specifically for the LSA crate engine controller * A 50 percent reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness from the controller to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition
Not Yet Reviewed
$502.90
$452.61
On Sale
Aeromotive VaporWorx BoostWorx returnless PWM kits for Ford GT500 have everything needed to provide a standalone, manifold referenced, OE-type returnless fuel system. When used with the low-cost Ford/Motorcraft PFS1314 fuel module, the systems will provide a 42 to 60 psi base pressure with a 1:1 manifold referenced fuel pressure change for up to 25 psi of boost--just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. The system's key to simplicity is the standalone manifold pressure sensor that tells the BoostWorx controller how to adjust the fuel pressure. Simply connect the hose from the pressure sensor mount to the intake manifold, set the fuel pressure according to the need, and you're done. The controllers can also be used with any engine that needs to have a separate MAP sensor for manifold referenced fuel pressure. BoostWorx GT500 controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability when combined with the OEM-style fuel module * A minimum 50 percent reduction in power to the fuel pump during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor
Not Yet Reviewed
$577.15
$519.44
On Sale
Aeromotive BoostWorx returnless KPM1500 PWM electronics kits are compatible anywhere that a Gen5 Camaro/SS/CTS-V-type fuel pump module is used and needs a standalone returnless control system. They include the needed parts to convert the KPM1500 (not included) for higher pressure and/or use with a standalone returnless PWM control system. Using pulse width modulation (PWM) is effective in keeping fuel temperatures down and relieving the electrical system of excessive load. These kits can drive the fuel pump electrically in either constant/static or manifold referenced pressure modes. Features: * Everything needed electrically to drive the KPM1500 fuel pump in a standalone arrangement (no fuel system control module) * Approximate 71 percent+ reduction in power to the fuel pump during idle/cruise vs. running both pumps full speed all the time. * Practically eliminates vaporlock/cavitation caused by overheated fuel * Fully returnless (external inline filter required) * 60-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate. * All cross-linked polyethylene wiring * Safety overpressure regulator to replace the KPM 50 psi part * UL94 rated components used throughout
Not Yet Reviewed
$530.45
$477.40
On Sale
Aeromotive VaporWorx BoostWorx PWM controllers for DualX ZL1 universal applications simplify installation and increase overall fuel system performance for dual OEM ZL1 fuel module applications. DualX uses a progressive ramping strategy with connections on the controller for the primary (pump 1) and follower (pump 2). The follower pump runs at lower duty cycle than the primary, allowing the follower pump to be on at all times, but at a lower average power, and allowing the pumps in the follower module to continually fill the reservoir with fuel, so it is ready to feed the engine under the most challenging conditions. As the primary pump increases in duty cycle, so does the follower, and once the primary is at 100 percent, the follower continues to increase to 100 percent duty cycle, as needed. This strategy is automatic and requires no user programming or adjustments. BoostWorx PWM DualX ZL1 fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, Hobb's switches, or filters needed -- OEM fuel level sensor can be used if desired * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * Can be used in constant or manifold referenced fuel pressure modes -- Manifold referenced suggested to further reduce electrical demand
Not Yet Reviewed
$630.20
$567.18
On Sale
Aeromotive offers true billet fuel pressure regulators designed to meet the performance requirements of Ford engines. Their Ford fuel pressure regulators feature a stainless steel spring, custom-designed to provide the regulation required by Ford's 4.6 and 5.0L engines.
( 47 )
$256.75
$231.08
On Sale
Aeromotive billet fuel rails are built for maximum fuel flow and ease of installation. They deliver optimal injector supply with minimal hydraulic fluctuation and will feed up to 3,000 hungry horses. The fuel rails feature ORB-08 ports with compact connections and positive leak-free sealing. Full-size ports at the end of the rails insure proper fuel flow. Additional inlet and outlet ports are provided where required for plumbing convenience. Steel mounting brackets are custom engineered for each application, combining a solid durable mounting platform that ensures a correct fit. Aeromotive fuel rails are CNC-machined and include a great looking anodized finish. Order the kit recommended for your vehicle.
( 14 )
$380.35
$342.32
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
