Availability
Manufacturer Rebate
Are you running rich or lean? Innovate oxygen sensors will monitor and tell you just what the facts are. These precision sensors collect and feed the data you need to aid in restoring accurate gauging your fuel mixture. They offer replacement Bosch LSU 4.2 and 4.9 sensors for their digital A/F ratio meter and digital wideband gauges. Plus, Innovate wideband systems allow the sensor to be recalibrated for the ultimate in accuracy, maximum performance, and safety!
( 25 )
$89.99
—
$111.99
Manufacturer Rebate
Innovate LC-2 Digital Wideband Lambda O2 Controller kits are ideal for applications such as dynamometers, data acquisition systems, stand-alone ECU's, and gauges. They feature self-calibrating circuitry to compensate for changes in temperature, altitude, and sensor condition. These units include a digital input/output, and two full-programmable analog outputs. It can be "daisy-chained" for cost-effective individual cylinder monitoring, and is fully compatible with Innovates' Modular Tuning System (MTS). Additional features include: * Patented DirectDigital™ Wideband Technology * Wideband O² Compatible with all fuel types * Ability to calibrate O² sensor for maximum accuracy * Integrated dual-color status LED (Green/Red) * Two configurable linear 0-5v analog outputs * Positive lock connectors for all connections * Innovate MTS serial in/out * Serial connection to your PC * Real-time display data on screen and/or with powerful LogWorks software
( 11 )
$160.99
—
$179.99
Manufacturer Rebate
These Innovate LM-2 digital air/fuel ratio meter basic kits combine an air/fuel ratio meter and a full-function 32-channel data logger to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggyback fuel controller, a race carburetor, an aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, Innovate's LM-2s are the tools you need to dial-in maximum horsepower. The Innovate LM-2 digital air/fuel ratio meter basic kits' digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. Their self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. They also feature two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes factory-ready for narrow band simulation; analog output 2 is configured as 0 V = 7.35 AFR and 5 V = 22.39 AFR. Additional features include: * Patented "Direct Digital" wideband technology * Wideband O2-compatible with all fuel types * OBD-II scan tool reads/clears DTCs and logs up to 16 channels of CAN OBD-II data (cable not included) * Large, high-contrast graphics LCD * 4 fully-differential analog inputs * 2 configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial in and out * USB connection to your PC
( 6 )
$469.99
Manufacturer Rebate
If you've ever tried getting your tach to function after an LS swap, you know it's not always a simple procedure. Save time and frustration without making a single cut in your factory wiring—using one of these AutoMeter Plug-and-Play LS tachometer harnesses. They let you quickly and easily install the AutoMeter 9117 tach adapter onto your LS-derived engine. OEM spec connectors and wiring assure a hassle-free installation that takes minutes rather than hours. No splicing, cutting, or risks of voiding your vehicle's warranty! (Harnesses are available with or without the 9117 adapter.)
( 22 )
$103.99
—
$168.99
Manufacturer Rebate
Need to install a tachometer in your late model distributorless vehicle? AutoMeter has the solution. These tach adapters are designed for vehicles with coil pack or coil-over-plug ignition systems where no tachometer output or signal wire is available. They allow most late model distributorless vehicles to have a tachometer and/or shift light installed.
( 28 )
$109.99
Manufacturer Rebate
These accessories from Innovate are designed to work with your Innovate air/fuel ratio monitor. They are perfect for upgrading your current monitor or for replacing worn-out components.
( 44 )
$33.99
—
$96.99
Manufacturer Rebate
AutoMeter OBD-II Signal Splitters provide remote mount connections for additional devices. These units are low-profile splitter/pass-throughs, and are ideal for AutoMeter products like AirDrive, DashLink, DashControl and SmartConnect instrumentation. They also provide additional, easy-to-access connection points for other onboard devices requiring access to the OBD-II data stream. Other features of AutoMeter OBD-II Signal Splitters are: * Connects to existing vehicle OBD-II port, providing two remote mount connections * 10 in. straight through leads with strain reliefs between 16-pin male and female connectors compatible with J1962 OBD-II Standards * Please note: device and vehicle compatibility may vary. Signal splitter designed to maintain OBD-II data signal integrity across two remote connection points, but does not correct for data bus termination, traffic conflicts, or compatibility of attached devices.
( 11 )
$41.99
Manufacturer Rebate
Innovate's LM-2 digital air/fuel ratio meters combine an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggyback fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, Innovate's LM-2s are the tools you need to dial-in maximum horsepower. The meters' digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2s' self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LM-2s also feature two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes factory-ready for narrow band simulation; analog output 2 is configured as 0 V = 7.35 AFR and 5 V = 22.39 AFR. With the provided LM Programmer software, these analog outputs may also be configured by the user. Innovate's LM-2s are available in single wideband and dual wideband O2 configurations. Additional features include: * Patented "Direct Digital" wideband technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool, read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card (included) * Playback log data on screen with powerful LogWorks software (included) * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * 4 fully-differential analog inputs * 2 configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC
( 11 )
$550.99
—
$712.99
Manufacturer Rebate
Installing an accurate aftermarket tachometer on diesel applications has been problematic, until now. AutoMeter diesel tach adapters are ideal for all vehicles equipped with an alternator needing an accurate tach signal. A small pick-up probe is strapped to the outside of the vehicle's alternator and inductively leads its rotation, thus requiring no drilling or modifications for installation. They're compatible with all standard-ignition AutoMeter tachometers and are warranty-friendly. With simple one-touch calibration and widespread uses, AutoMeter diesel tach adapters are just what you need. Additional features: * Generates a standard 12 V square wave tach signal for RPM devices * Discreet status light indicates operation
( 3 )
$123.99
Manufacturer Rebate
To maintain your vehicle's top performance, you need the proper idle and rpm from your Holley-style 4-barrel carburetor. Innovate throttle position sensors will ensure that you are in the zone. Plus, installation is straightforward. Rely on Innovate to keep your vehicle running properly.
( 8 )
$106.99
Manufacturer Rebate
Dedenbear Lightning delay boxes feature a billet aluminum enclosure that keeps all of the precision circuitry protected. The small multi-functional units' can be every racers little helper! Features include: * Four different delay modes * Tap/tap down * Starting line launch control * Two 4-stage throttle stop/nitrous timers * Adjustable transbrake lockout * East touch illuminated keypad * Lighted display for easy nighttime viewing * Independent line lock output * Remote dial-in board display output * Accidental transbrake release protection
( 1 )
$709.99
—
$746.99
Manufacturer Rebate
AutoMeter CAN Bridge data modules are the ideal solution to streamline adding gauges or an InVision LCD dash to OBDII based engine and vehicle platforms (2008+). The intuitive CAN Bridge simply plugs into the diagnostic port and captures the existing sensor data and outputs up to six signals to drive a tachometer, speedometer, temperature, pressure, fuel level (0-90 ohm only), and volts on your vehicle. Quickly and easily setup your system to output the available parameters of your choice by utilizing the CAN Bridge data module's menu navigation buttons and OLED display. With this advanced CAN Bridge system from AutoMeter, you can now simplify your next instrumentation installation on your ride! Additional features: * Works with most OBD-II applications which is standardized across all OEMs starting in 2008 * Module includes OLED display and five push buttons to effortlessly navigate menus and program system for operation * Plug-and-play from OBDII to traditional round AutoMeter short sweep electric gauges, tachometers, electronic speedometers, and InVision LCD dashes * Six total channels available: tachometer, speedometer, fuel level (0-90 ohm only), temp, pressure, and volts * Simplifies instrumentation wiring and installation; no sensors to hookup, which means less wires to connect * Sensor data must be present on the data stream to function, otherwise a discrete sensor must be used
Not Yet Reviewed
$363.99
Manufacturer Rebate
AutoMeter fuel bridges are designed with cutting-edge technology to gather and distribute sending unit data regarding fuel levels and related sensor functions. The fuel bridges interface with any AutoMeter fuel level gauge and with any stock or aftermarket sending unit. These electrical switch panels are designed with three push buttons and an LED display that allows for easy setup. They're compact in size at 3 1/8 in. wide x 2 1/2 in. tall x 3/4 in. thick. AutoMeter fuel bridges include a low fuel level warning capability and can also turn on an LED or relay.
( 8 )
$76.99
Manufacturer Rebate
The new technology in these AutoMeter Level 1 digital Pro Shift controllers makes it possible to do away with traditional plug-in chips, while providing a combination of features only previously available on the larger Shift-Lite and Playback tachometers. These Level 1 controllers feature a single programmable shift point and a digital rpm display and are compatible with 4-12 cylinder engines.
( 3 )
$147.99
Manufacturer Rebate
These AutoMeter LED lighted gauge dimmers allow you to dim your LED gauges separately from other factory dashboard gauges. These dimmers are compatible with all other LED-lit instruments, and are capable of adjusting up to seven gauges together.
( 13 )
$49.99
Manufacturer Rebate
Do you have a damaged or malfunctioning manifold absolute pressure sensor? Innovate's dependable manifold absolute pressure sensors help to maintain engine performance and fuel efficiency by relaying changes in manifold pressures to your ECU. The computer uses the information to measure engine load so that your ignition timing can be advanced or retarded as necessary.
Not Yet Reviewed
$75.99
—
$89.99
Manufacturer Rebate
Dedenbear RPM2 switches feature push-button thumbwheels to let you select any shift point in 100 rpm increments, from 1,000 to 9,000 rpm. The switches sense rpm using MSD, Mallory, Crane, or any other standard ignition system. They have a 0.5-second delay feature that wires into the transbrake, or roll control to prevent false shifts due to tirespin, converter flash, or launch.
( 1 )
$339.99
Manufacturer Rebate
Innovate LSU 4.9 sensor cables provide correct connection to your wideband. Innovate's latest generation of widebands are multi-sensor compatible. The LSU 4.9 sensor cable connectors are 1 in. or 25mm at their widest point and are identified by the "4.9" molded on the plastic. They are available in three lengths. Innovate LSU 4.9 sensor cables will work with their LM-2 and LC-2 wideband meters and their MTX-L, SCG-1, DLG-1, PSB-1, and PSN-1 gauges.
( 2 )
$34.99
—
$82.99
Manufacturer Rebate
These Dedenbear reaction time delay boxes feature push-button thumbwheels with a range of 0.000-9.999 seconds, and full voltage through the boxes, with no voltage drops to the transbrake. They can also handle any transbrake up to 45 amps. They can be used with solid core wires and on any ignition system.
( 2 )
$349.99
Manufacturer Rebate
Innovate SSI-4 Plus 4-channel interfaces can be used as stand-alone devices for logging data directly into a laptop with the included LogWorks software—or used in conjunction with any other MTS (Modular Tuning System) compliant device. Channel 1 is a direct rpm input by default, and can also be configured for external 0-5 V, frequency, or spark reference for ignition timing measurement. Channels 2-4 are configured to digitize external 0-5 V analog signals by default. Channel 2 can directly measure frequencies (like driveshaft speed) or duty cycles (for injectors). Channel 3 can measure rpm from a VR (variable reluctance) sensor, and can also be set up for ignition timing crank angle reference (trigger wheels) or frequency. Input 4 defaults to digitizing external 0-5 V analog signals, but can also be configured as a frequency input. Take control of your vehicle with an Innovate SSI-4 Plus 4-channel interface.
( 4 )
$128.99
Manufacturer Rebate
Innovate PL-1 pocket data loggers are the latest in their motorsports lineup of products to allow for easy data logging of your MTS (Modular Tuning System)-compatible product. Whether you have an LC-2 and SSI-4, MTX gauges, or any other combination of Innovate Motorsports MTS devices, they integrate seamlessly to record all of the data from the connected devices. Includes: * 2GB SD memory card * SD memory card reader, USB to PC * Power cable, 12 V * LogWorks 3.0 software, available for download (CD not included) * MTS patch cable, locking 4-pin to 4-pin, for newer devices like the MTX gauges or LC-2 * MTS patch cable, 2.5mm to 4-pin, needed for LC-1, SSI-4, TC-4, and LMA-3
( 3 )
$99.99
Manufacturer Rebate
Innovate LM-2 Ultimate shop kits set you up to dial in maximum horsepower. The Ultimate shop kits are available in single or dual channel versions and include 18 ft. sensor cable, exhaust clamp, inductive clamp, and bung/plug. Innovate LM-2 features: * Patented DirectDigital wideband sensor control, 100 percent digital wideband air/fuel ratio technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool--read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card * Playback log data on screen and/or with powerful LogWorks software * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * Four fully differential analog inputs * Two configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC
Not Yet Reviewed
$626.99
—
$824.99
Manufacturer Rebate
Want faster and more consistent reaction times? Reach for the Dedenbear trans-brake switches and push the button! These quality units offer smooth, precise releases. They're designed to give you extra options, making your "racing" life just a bit easier.
( 11 )
$33.99
—
$106.99
Manufacturer Rebate
Dedenbear stretch cords have bigger gauge wires for greater reliability and less voltage drop. They are available in various gauge sizes and colors to select from and extend over 10 feet.
( 7 )
$46.99
—
$67.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
