Availability
Edelbrock's Performer carburetors feature 2-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves—ajhhnd the primary venturi booster is a bottom-feed design for smoother acceleration and better drivability. An Owner's Manual is included with every Edelbrock carburetor. The manuals consist of two sections: Section 1, Theory of Operation and tuning procedures which will help you be prepared to develop your own individualized calibration. Section 2, Tuning procedures will take you through a step-by-step procedure that will enable you to achieve a desirable calibration. For added ease of tuning, a Calibration reference chart for your model of carburetor is also included. Performer carburetors are available with a variety of options; select the model that best suits your needs.
( 1447 )
$414.95
—
$590.95
Edelbrock AVS2 Series carburetors are the next generation of carburetors. Featuring annular flow primary boosters, adjustable secondary air valves, and a new calibration, these AVS2 carburetors offer improved idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered when the carburetor transitions from idle to full throttle. Each annular booster features eight, equally spaced orifices to improve fuel metering. The improved flow metering makes this carburetor ideal for use with a wide variety of small-block and big-block engines with either dual- or single-plane intake manifolds.
( 810 )
$394.95
—
$586.95
Advance with the digital power of your popular favorite--MSD 6AL ignitions. With less power draw and higher output, MSD moves you with "the fire to drive" in a digital powerhouse! Inside microprocessors, updated circuits and efficient components monitor and handle every firing and rev limit to produce more power while pulling less current. Don't worry; features that made their 6AL boxes your first choice remain but with improved output--more than135mJ of spark energy for every firing with 530+ volts to the coil! And, to go with the new power, a new look. These digital 6AL ignition controllers are sleek with a lower profile. Wiring is routed out one end through a sealed and locked connector and two rotary dials to set rpm limit are positioned right on top--easier installation, super easy access and a clean, neat appearance under the hood. Controllers are supplied with wiring harness and components you need for install plus, vibration mounts. Increased output and proven multiple-spark power--MSD digital 6AL ignition controllers are a definite win-win!
( 420 )
$339.95
—
$344.95
The Street Warrior uses the latest technology and quality products that Holley is known for. Constructed from aluminum, the Street Warrior is a great replacement carburetor for your daily driver or your weekend cruiser. Perfect replacement carburetor when your original style is no longer available.
( 395 )
$480.95
—
$499.95
The legacy continues … and now it is bigger, better, and faster! Built for enthusiasts and professionals, MPV13 is the fastest most sophisticated OBDII interface device to date, and Pro is the new standard. Take advantage of Pro Feature Set capabilities, like standalone data logging and PROLINK+ compatibility (sold separately) already built in. MPVI3 redefines the limits of speed and control with faster standalone data logging and two times the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation. HP Tuners VCM Suite MPVI3 Credit Pro packages equip you with the most inclusive scanning, logging, and calibration, making them the only tool you need in your toolbox. The MPVI3 connects your vehicle's control modules to HP Tuners' VCM Suite software. You can run complete diagnostics, monitor vehicle performance, read from various vehicle control modules, and more in VCM Suite. Optimize your performance, fuel economy, or whatever your vehicle goals may be in VCM Editor with a multitude of defined parameters. When you are ready, license and tune any vehicle currently supported by HP Tuners with the fastest read and write speeds available. Connect, read, edit, write, drive; HP Tuners VCM Suite MPVI3 Credit Pro packages are offered with or without tuning credits.
( 49 )
$399.99
—
$499.97
Borgeson's Street and Performance Series steering boxes are modern quick ratio units specially designed to replace the Saginaw/Delphi 800 Series in 1965 and up GM vehicles and 1968-86 Chevy C10 and K10 trucks. These Street and Performance power steering boxes will bolt directly to the stock location and fit to the original power steering pitman arms. Adapters are included with each steering box to be able to use either O-ring or flare style hose connections. All Borgeson power steering boxes are assembled and quality tested in-house to ensure you get the best possible replacement for your vehicle. Note: Vehicles switching from manual steering will require a power steering pitman arm (not included).
( 214 )
$467.78
—
$504.00
Aeromotive universal bypass fuel pressure regulators are dual purpose—for use with fuel systems in street or track applications. They feature adjustable base pressure and are ideal for vehicles/systems where superior flow and pressure control are desired. The regulators are available in different styles and pressure ranges, and for fuels such as gasoline, diesel, and flex.
( 174 )
$252.00
Summit Racing™ performance fit radiators feature a quality aluminum core and are designed to fit your vehicle. They offer improved heat dissipation over OEM radiators, and some models are available with a built-in automatic transmission cooler. Modifications may be required when installing Summit Racing™ performance fit radiators. Designed for use with electric fans, the OEM fan shroud is not compatible with these radiators in most applications.
( 1058 )
$271.99
—
$497.99
S&B Filters body mount kits deliver a smooth ride that will last a lifetime. Made from premium silicone rubber, these bushings offer great vibration isolation and will not crack or breakdown like OEM foam or rubber bushings. S&B bushings also come with corrosion-resistant coated steel cups and bolts, plus the cap bushings have a distinct boss feature that matches the slot on the mounting tabs, and are designed to key into the frame tab. Stock body mounts deteriorate over time and cost a fortune. Urethane mounts are hard and squeak. S&B silicone body mounts have a smooth stock ride with an OEM fit and finish that will last the life of your vehicle.
( 41 )
$399.00
—
$499.00
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 401 )
$380.95
—
$533.95
XS Power AGM batteries are some of the lightest racing batteries on the market. Independent test results have proven that they outperform other battery models that outweigh these power providers by up to 20 lbs. Cutting-edge lead acid battery technology produces more energy in a smaller space because each cell is compressed before case insertion, resulting in efficient power-producing packages that are completely sealed with no need to ever add water. This design is ideal for the abuse of racing, making these the batteries of choice for demanding racers and Monster Truck drivers who need top performance and reliability. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power AGM batteries best suited for your application. Product features include: * Designed to be an inch shorter than what the competition offers for fitting in places where space is at a premium * Deep-cycling ability and ultra-low internal resistance results in high cranking amps and excellent vibration resistance * Variable position mounting (except upside-down) thanks to the no-spill design * Offered in 6 V, 12 V, 14 V, and 16 V models
( 265 )
$259.99
—
$499.99
Mickey Thompson ET drag slicks are designed, engineered, and built for outstanding performance, run after run. They feature a 2-ply wrinkle wall carcass with state-of-the-art compounds for a bigger contact patch. Radials are also available. The special rubber compound requires less heat than other brands of drag slicks, resulting in better traction and faster times. Plus, you'll have fewer burnouts and a longer tire life. And, because they use more air pressure than other slicks, these tires are safer at higher speeds. Choose the size and sidewall style you prefer for your dragster.
( 282 )
$252.29
—
$479.69
ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application.
( 385 )
$250.99
—
$376.99
Direct upgrade for existing HyperSpark ignition box, Holley Sniper EFI HyperSpark 2 CD ignition boxes feature a smaller form factor and hotter spark. These low-profile boxes can fit nearly anywhere inside of your engine bay or cockpit. They have all the proven features of their predecessor in a smaller package, making it easier to mount, providing the cleanest installation possible. HyperSpark 2 ignition boxes pack up to 150 mJ of spark energy when used with the matching ignition coil, resulting in enough energy to safely fire your Sniper EFI engine combination. Features: * Plug-and-play with existing HyperSpark installations, or Sniper EFI HyperSpark main harnesses * Includes an ignition harness for fresh Sniper EFI Installs simply wanting to add timing control * New processor and board design provide a highly efficient ignition, minimal heat, and maximum spark energy with less current draw * High rpm operation and maximum output using the HyperSpark ignition coil * Powerful capacitive discharge of multiple sparks improves performance and ensures complete combustion * Consistently high-spark energy of 135 to 150 mJ for every firing, from idle to redline rpm * Operates on most 7 to 28 V electrical systems * Fully protected against an open coil, shorted coil, and open load * 1.47 lbs. lighter than an original HyperSpark ignition box * Quickens throttle response and improves starting * Tach Output to drive an external tachometer
( 2 )
$399.95
Larin mobile engine testing stations are ideal for engine testing, break-in, leak detection, assembly, demonstration, and detailing work. These stands allow you to run the engine while working on it, to dial it in and check performance before installing the block in your vehicle. Larin mobile engine testing stations are great time and labor-savers--being able to test, tweak, repair, or make modifications before installing your engine allows you more time to enjoy the results once your engine is put in. It's also much more convenient and accessible to take care of any issues while the block is on the engine testing station, rather than under the hood. Larin Corporation mobile engine stands are fully adjustable, telescopic, and portable on heavy-duty steel casters and will accommodate most any engine. These stands include a tachometer and temperature and oil pressure gauges, along with a console, battery tray, and a one-gallon fuel tank. They are perfect for shops, garages, schools, and hobby builders.
( 45 )
$499.99
LEED Brakes Bandit electric vacuum pump kits provide an efficient, quiet, and vibration-free solution for your brake vacuum assist needs. Each vacuum pump is pre-wired and tested on the assembly line to assure a trouble-free and easy installation with a 2-wire power hookup and base-plate mounting template. The Bandit Series electric vacuum pumps are available in a naked, black, or chrome finishes. The Black and Chrome Series pumps allow the option of removing the pump assembly as one unit from the canister—turning it into a "Naked" Series electric vacuum pump; this allows the pump to be mounted in very confined spaces. So, if you're tired of a stiff power brake pedal, or simply want a quieter solution, give the LEED Brakes Bandit vacuum pump a try!
( 137 )
$369.99
—
$389.99
SCT X4 Power Flash programmers arrive to you pre-loaded with dyno-proven tune files for select vehicles, to unlock your vehicle's hidden potential! Programming your vehicle with one of SCT's pre-loaded tune files is as easy as 1-2-3. Simply plug the OBD-II connector into vehicle's OBD-II port, select the pre-loaded tune files using the simple to navigate menu and in minutes the X4 programs your vehicle for your particular driving style. Additional features and facts about SCT X4 Power Flash programmers include: * Stores up to 10 custom tune files * Full color LCD display * High-speed data logging/monitoring * Reads/clears DTC trouble codes * Dual analog inputs * Most popular vehicles supported * Installs quickly and easily * Easy restoration back to stock * User adjustable vehicle parameters * USB Interface cable included
( 96 )
$399.00
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 436 )
$374.95
—
$646.95
Summit Racing™ LS conversion headers are made of 304 stainless steel and offer great quality, performance, and affordability. These will allow you to swap an LS into almost anything and provide more clearance than manifolds at the collectors. Our headers are mandrel bent, TIG-welded, and feature a polished stainless steel construction. They also feature V-Band collector construction, collector merge spikes, and include collector stubs, bolts, and graphite manifold gaskets for easy installation.
( 19 )
$289.99
Replace your old carburetor with original Holley performance 4160 carburetors. Budget-minded enthusiasts, like you, will be rewarded with maximum performance from your stock or mildly-modified engine. These Holley 4160 carburetors are easier to tune than full race carburetors with temperamental secondary metering blocks and dual pumps. Plus, they're available in your choice of universal or direct-fit OE replacement versions with all emission provisions. Bolt-on installation and improved performance; no wonder when car guys think of carburetors, they think of Holley 4160 carburetors!
( 255 )
$524.95
Ford Performance Parts hydraulic roller lifters are offered as direct replacements for 302-351W production small block hydraulic roller lifters; and as high performance versions for higher rpm and severe-duty applications. The high performance hydraulic roller tappets were developed specifically for racing conditions and are recommended for performance and racing applications. Both standard and high performance hydraulic roller lifters use the production dog-bone type tie bars and retainer plate components included in M-6253-A50 hydraulic roller lifter installation kits.
( 91 )
$351.99
—
$491.99
Not only are Hoosier drag racing slicks fast, but they also last longer than most other tires, so you get more passes out of them. What more can you ask for from a drag slick? Hoosier drag racing slicks are available for front and rear applications in a variety of sizes and in your choice of compounds to suit your driving style or track condition.
( 388 )
$258.00
—
$530.00
BTR camshafts are designed for excellent performance and great drivability. Brian Tooley Racing offers a large number of camshafts and combinations to fit many applications for trucks and cars. Numerous grinds for turbo, supercharged, and naturally aspirated combinations are available for your project, all backed by years of experience, knowledge, and a passion for power.
( 13 )
$389.99
—
$499.99
Mickey Thompson ET Street S/S tires are performance radial street tires that are drag-strip ready. They combine the proven Mickey Thompson R2 drag tire compound with polyester-ply, steel belted, tubeless radial construction to deliver performance, strength, and reliability. They're available in various sizes to fit nearly any performance wheel. M/T products are built to win with an unceasing drive for faster—better! Order the Mickey Thompson ET Street S/S tires designed for your wheel application. Product features include: * DOT-approved for street use * Tread void offers improved hydroplane resistance and excellent dry traction * Proven R2 compound delivers superior traction at the strip * Little or no burnout required * Tubeless, radial construction provides lead-free seal
( 666 )
$267.89
—
$531.79
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
