Free Shipping on Orders Over $125 at Summit Racing

OTC 6,000 lb. Capacity Revolver Diesel Engine Stands

These OTC 6,000 lb. capacity revolver stands will handle the heaviest of engines. OTC designed these stands with a 96:1 ratio worm gear set, and the crank handle can be locked in any position. Their integral 12-ton jack raises the work to provide the swing radius needed for clearance.

Not Yet Reviewed

$8,162.99

Clearance

OTC Motorcycle and ATV Lift Jacks

These OTC motorcycle and ATV lift jacks will make it much easier to work in the garage. By allowing the handle to be lowered, the user will be able to walk around the lift. These low-profile OTC jacks are perfect for motorcycles with ground clearance issues. Additional features include: * 1,500 lb. capacity * Large 17 in. long skids * Foot pedal release * Locking rear casters * Automatic safety locks * Two ratcheting tie straps for safety

4.82 out of 5 stars ( 22 )

$424.99

$379.50

OTC Strut Tamer II Extreme Spring Compressors

OTC Strut Tamer II Extreme spring compressors supply the strongest compression force—up to 4,000 lbs. to compress and rebuild large truck, SUV, and passenger car shock/strut assemblies. They also set a standard for safety, meeting the new ASME PASE safety standards for spring compressors. Safely compress the largest strut springs with OTC Strut Tamer II Extreme. They are available with or without stand. Features include: * Forged locking jaws includes larger pads and offset to clamp onto and compress springs even tighter than before * Extra-thick 5/8 in. compression arms for superior strength, stability, and safety * Locking trunions for optimal stability during spring compression * Arm-locking rings eliminate the need for tools to adjust * 2:1 reduction gearbox allows for a 2:1 torque compression increase when compressing struts * Spring capacity of 2 1/2 in. to 10 in. diameter; 1 1/4 in. to 24 in. vertical stroke * Stand with wheels for easy mobility in the shop (ST model only) * During compression, the stand's wheels lift off the floor, and four no-slip rubber pads keep the stand firmly in place

5.0 out of 5 stars ( 1 )

$1,452.99

—

$1,955.99

OTC Heavy-Duty Engine Hoist

OTC's heavy-duty engine hoist, model 1819, offers several benefits including increased efficiency, reduced risk of injury, and improved productivity. The heavy-duty engine hoist allows for quick and easy lifting and moving heavy loads like engines, transmissions, and other bulky components, making it a valuable tool for mechanics and technicians. By minimizing the need for manual lifting, the crane also helps reduce risk of back injuries and other strain-related issues. Roller bearing wheels and a steering dolly offer easy movement and precise positioning of the crane. Product features: * Heavy-duty construction and precision engineering ensure long-lasting performance and reliability * Can be used for various tasks beyond engine removal, including lifting transmissions, axles, and other heavy components * The hoist has a 2,200 lb. capacity with the boom retracted and 1,650 lb. capacity with the boom extended * Telescoping boom extension and adjustable leg spread allow for versatile positioning and access to different areas * Equipped with 2-speed hydraulic hand pump * 16 7/8 in. lifting chain * Engine hoist * Space-saving fold-away feature for storage

Not Yet Reviewed

$5,869.99

OTC Service Floor Jacks

OTC service floor jacks have built-in safety overload to prevent over utilization beyond the jack's rated capacity. They also feature a convenient foot pedal to speed the lifting operation, with a handle lock and release control located on top of the handle. The spring-loaded handle can be locked into any position from vertical to horizontal. Cycle tested design for a long life of professional duty. Offered in 5, 10, or 20-ton with or without air-assist OTC service floor jacks out muscle all others.

Not Yet Reviewed

$4,694.99

OTC Revolver Engine Stand Adapter Plates

OTC Revolver engine stand adapter plates are available for a long list of engines from Detroit Diesel to Volvo. Many of these steel plates will require the universal adapter assembly for mounting individual plates to your OTC Revolver engine stand. Choose the plate(s) for the engine(s) your work on.

5.0 out of 5 stars ( 2 )

$806.99

—

$1,269.99

OTC Engine Stands

OTC engine stands are made from heavy-duty materials designed for servicing light truck and car engines. These engine stands have four adjustable mounts to fit most engine blocks and they make work easy with a 24 in. handle to rotate your engine 360 degrees. Fixed polyurethane back wheels and poly swivel castors on the front allow for smooth travel around the garage.

5.0 out of 5 stars ( 1 )

$675.99

OTC RamRunner Two-Stage Hydraulic Pumps

OTC's RamRunner two-stage hydraulic pumps are designed to power hydraulic rams for tasks like frame straightening and wheel alignment in automotive and industrial settings. They provide a combination of high-flow at low-pressure for quick ram movement and high-pressure at low flow for applying force when needed. This dual-stage approach allows for efficient and fast operation, especially when working with large rams. Models are available with 2-position/2-way manual valve or 3-position/4-way manual valve, allowing for "advance," "hold," and "return" positions, providing precise control over the ram's movement. Select the OTC RamRunner two-stage hydraulic pump suited for your application needs. Product Overview: * These pumps can deliver up to 10,000 psi max pressure output * Commonly used in automotive repair, industrial maintenance, and construction for tasks like frame straightening, wheel alignment, and other applications requiring hydraulic power * The two-stage design optimizes both speed and force, leading to efficient and time-saving operation * Can be used with both single-acting and double-acting rams, offering flexibility in various applications * Many models come with a remote control cord for safe and convenient operation from a distance, depending on hydraulic pump model selected

Not Yet Reviewed

$3,224.99

OTC Transmission Adapter Kits

OTC's transmission adapter kits allow the user to utilize the engine stand. OTC transmission adapter kits replace the adjustable arms of the stand to hold and position the transmission at workbench height. The transmission is held with three sides fully exposed and can be rotated 360 degrees for an easy repair.

4.0 out of 5 stars ( 9 )

$1,232.99

OTC 25-Ton Capacity Shop Presses

OTC's 25-ton capacity shop presses are for use in various pressing applications, particularly in automotive and industrial settings. Their primary purpose is to apply high force for tasks like pressing bearings, bushings, and other components, as well as for assembly, disassembly, and straightening metal parts. The presses feature a large work area, an adjustable press bed, and an air-driven hydraulic pump for efficient and precise operation. Whether it's a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians' productivity and shop profits. Key features and benefits: * Tough, economical press is suitable for precise metal shaping, bending, and other fabrication tasks that require controlled pressure * Ideal for pressing rear axle bearings, piston pins, and other components during vehicle maintenance and repairs * Heavy steel construction with powdercoat finish * Pneumatically driven hydraulic pump with simple foot operation keeps both hands free * Press bed is raised or lowered with a hand crank, allowing one-person set-up and operation * Large 30 in. x 46 in. work area under ram makes positioning of even bulky work easy * Adjustable press bed is easily raised and lowered by a dependable lifting mechanism * Press comes complete with air-driven hydraulic pump, gauge, Tee and hose, and hydraulic ram with 6 1/4 in. stroke

Not Yet Reviewed

$4,922.99

OTC Suspension Bushing Tools

OTC offers suspension bushing tools that are designed to remove and replace suspension bushings quickly, saving valuable time compared to traditional methods. The hydraulic cylinder and press plate assembly mounts to the suspension component or leaf spring for hands-free operation and eliminates the need to hold heavy equipment. These bushing tools are to be used in conjunction with OTC's bushing adapter sets (not included) to fit specific bushings and suspension components. Features and benefits: * Tool features: hydraulic cylinder, (2) press plates, and (2) puller legs * The hydraulic cylinder and press plate assembly mounts to the suspension component or leaf spring for hands-free operation and eliminates the need to hold heavy equipment * 25-ton capacity * Includes an OTC 25-ton single acting cylinder

Not Yet Reviewed

$1,328.99

OTC Ball Joint Master Service Kits

Stop searching for makeshift solutions for servicing vehicles equipped with press-in ball joints--everything required is laid out in these ball joint master kits by OTC Tools. With kits of this magnitude, finding the correct adapters and using them correctly is key to minimizing service time. These complete kits consist of 70+ adapters, a C-frame, and a guide that contains application charts and diagrams with step-by-step instructions.

Not Yet Reviewed

$1,333.99

OTC Hub Grappler Kits

OTC Hub Grappler kits are the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. They eliminate unnecessary alignments or the use of a shop press, cutting service time dramatically. OTC Hub Grappler kits include six adapters that increases application coverage, a tie rod/ball joint tool, and two Ford axle installers. Features include: * Hub Grappler puller is specifically designed to apply maximum force with minimal effort from an impact gun * The jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners * A 3/4 in. custom drive screw coupled with a special equalizer washer provides smooth operation while the proprietary heat-treating extends its life 5 to 10 times longer than similar designs

3.67 out of 5 stars ( 3 )

$896.99

—

$1,954.99

OTC DPF Cleaner Replacement Filter Cartridges

OTC DPF cleaner replacement filter cartridges ensure that the cleaning process of your Diesel Particulate Filter cleaning units remain effective. Each new filter cartridge includes a Bag-out kit with plastic bag, cinch strap, and cable tie to remove and dispose of used filters. Replacing cartridges should be part of your unit's regular maintenance. To get the best service from your DPF cleaner replace filters with genuine OTC filter cartridges.

Not Yet Reviewed

$449.99

OTC Air/Hydraulic Powertrain Lifts

The OTC air/hydraulic powertrain lifts are built to handle heavy engine and transmission assemblies, gas tanks, drive axle assemblies, electric vehicle batteries, and more! By facilitating easier and safer handling of powertrain components, these air-hydraulic powertrain lifts can contribute to faster, more efficient repairs, potentially saving time and labor costs. Key features and benefits: * Offers several benefits for automotive and other repair applications—designed for safely lifting and maneuvering heavy components like engines, transmissions, fuel tanks, and electric vehicle batteries * Scissors-type design allows access to all four sides of a component * Powered by an air over hydraulic foot pump for precise lifting and lowering control * Independent adjusting screws tilt the table 15 degree side-to-side, or fore-and-aft, and ensure maximum stability of the table in any position * Large, 8 in. swivel casters accommodate heavy loads * Meets ASME PASE standards

Not Yet Reviewed

$7,605.99

OTC 12-Ton Bottle Jack Presses

OTC's 12-ton bottle jack presses are suitable for a range of jobs, from light-duty to some heavier-duty applications, and can be used for various pressing, bending, and straightening tasks in automotive and industrial settings. They are known for their efficiency, reliability, and compact design, making them suitable for professional shops and home garages. OTC 12-ton capacity bottle jack presses are suitable for: -- Automotive repair for removing and installing wheel bearings, ball joints, and other suspension components -- General mechanics for pressing gears, bearings, bushings, and other parts -- Metalworking for bending, straightening, and stamping metal parts -- Industrial applications for handling various pressing and forming tasks in a shop environment Key features: * 12-ton bottle jacks are often used with shop press frames, further expanding their versatility for various pressing and forming tasks * A sturdy construction and high-quality components for long-term use * Their compact size makes them easy to store and transport, a benefit for both professional and home use * Offers great versatility—can be used for a variety of tasks, including removing and installing parts, bending metal, and straightening components * Hydraulic System provides controlled and powerful force for pressing tasks

Not Yet Reviewed

$2,230.99

OTC Engine Load Levelers

OTC engine load levelers are designed to hook to a crane or hoist to handle and position large pieces. OTC engine load levelers can be adjusted to compensate for off-center loads or be adjusted horizontally.

4.59 out of 5 stars ( 27 )

$2,023.99

—

$2,799.99

OTC Tubular Engine Support Bars

OTC's tubular engine supports bars are made from high-quality steel and rubber padded legs to give more stability and ensure a long life. OTC includes two 36 in. chain assemblies and two hook assemblies.

4.71 out of 5 stars ( 7 )

$263.99

OTC Air-Assisted 2,000 lb. Capacity High-Lift Transmission Jacks

OTC's air-assisted high-lift transmission jacks are perfect for those applications with a clearance problem--the low height of these jacks is 41.500 in. The jacks have a weight capacity of one full ton, and are designed with a metered foot-operated air pump. This allows each transmission to be effortlessly lifted into place, precisely controlling the load during removal and installation. A safety bypass prevents damage caused by a system overload.

Not Yet Reviewed

$4,162.99

OTC 25-Ton Capacity Heavy-Duty Oil Operated Oil Filter Crushers

OTC's 25-ton capacity heavy-duty oil operated oil filter crushers are built with a durable design to accommodate a wide range of filter sizes, from automotive to heavy-duty. These units offer several benefits including reduced waste volume, minimized environmental impact by removing a high percentage of residual oil, and efficient, automatic operation. Key features and advantages include: * Built with heavy-duty components, these crushers are designed to withstand the demands of a busy shop environment * Handles the big filters (up to 6 in, diameter and 12 1/2 in. long) found in trucks, construction equipment, farm implements, etc. (may also be used for automotive and light truck filters—this unit does it all!) * Crushes filters to quarter of original size, removing up to 95 percent of filter's oil capacity * Automatic cycle feature-simply load the filter, push a button, and walk away *Air/hydraulic pump works on standard shop air (requires 9 cfm at 100 psi) * Special valving returns ram automatically at the end of each cycle, no electrical connections needed * Built-in floor stand completely assembled)—whole unit requires just five sq. ft. of floor space * Reduced environmental risk—by minimizing oil spillage and leakage during handling and disposal helps prevent environmental contamination

Not Yet Reviewed

$6,242.99

OTC 2-Ton Aluminum Racing Service Jack Packs

OTC's 2-ton aluminum racing service jack packs combine their aluminum racing jack with jack stands for a ready-to-go package. The lightweight, 41 lb. jack includes side handles for easy transport and loading onto a truck for mobile service calls, while improved hydraulics and a wider track for the wheels make these OTC 2-ton service jacks durable and easy-to-use. Additional features: * 4 ft. padded lower handle protects rocker and door panels while providing maximum leverage to lift vehicles to a maximum of 18.5 in. * A rubber saddle protects vehicle undercarriage and prevents slipping * Saddle can be removed for lower profile to get under road-hugging vehicles as low as 3.4 in. * Meets ASME PASE-2019 safety standards * Jack stands have a 7 in. round base, flat-top style saddle, and pin lock with six slot adjustments

Not Yet Reviewed

$691.99

OTC 22-Ton Under Axle Jacks

OTC 22-ton under-axle jacks bring the versatility of air-assist operation to your shop's lifting tasks. A self-retracting, spring return feature with 49 1/2 in. long T-handle lets you easily position the jack under vehicles with long overhangs. One pull of the handle activates the self-retracting 22-ton capacity ram without having to crawl underneath the vehicle. Large rubber-tired steel wheels facilitate maneuverability on most types of terrain. The 3/4 in., 1 15/16 in., and 3 7/8 in. included saddle attachments are for multiple height adjustments based on the vehicle being lifted. OTC 22-ton under-axle jacks are ideal for lifting heavy-duty vehicles.

Not Yet Reviewed

$1,032.99

OTC Hendrickson Suspension Bushing Master Kit with Pump

OTC Hendrickson suspension bushing master kits for heavy-duty vehicles make pivot and D-pin bushing removal and installation easier tasks. Because the patented design allows the tool to be mounted to the suspension piece, the weight of the tool does not need to be held in place during operation. The kits also include centering adapters that align the tool and reduce the likelihood of bushing damage or improper installation. With the included OTC 25-ton cylinder, even bushings covered in road dirt and salt are easy to replace. These master kits feature an OTC Stinger Series air/hydraulic pump, with the needed hose and couplers to make it ready to use right out-of-the-box.

Not Yet Reviewed

$2,409.99

—

$2,531.99

OTC Car Dollies

Innovative, patent-pending OTC Tools car dollies clamp directly to pinch welds to prevent slippage during use. These independent units eliminate the need to adjust dolly width for different vehicle designs. They feature independently adjustable, threaded lift saddles with rubber pads to protect vehicle frames, and sturdy, easy-rolling casters--they're definite must-haves for any shop that does body and engine work. They provide easy movement of an FWD vehicle after the removal of the drivetrain. Features include: * Universal design for use on all vehicle types without additional adapters * 5 in. polypropylene casters * Each unit has a capacity of 1,800 lbs. (3,600 lbs., pair) * Lowered height of 9 in. * Raised height of 14 in. * May be used with or without tires on the vehicle

5.0 out of 5 stars ( 1 )

$493.99

59 Results Found For "otc"