Availability
Showing In Stock Items. Show All 107 Items.
If you're installing a new fuel tank, don't forget the entry point: the filler neck. Dorman offers dozens of models designed to fit into your stock or OEM replacement fuel tanks. They accept the stock gas cap and bolt in the factory location. Available for passenger cars, trucks, and SUVs, Dorman fuel tank filler necks make an excellent choice for your restoration project. Find the unit designed for your specific vehicle.
( 30 )
$398.99
Jaz Pro Sport fuel cells with 90 degree quick filler/flapper neck will equip your race car with quality, value, and most importantly—safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They're set up with one -8 AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers you the choice of your fuel cell to come with or without safety foam, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their lengthy list of sizes, shapes, and capacities are intended to meet your needs and wants perfectly. These Jaz Pro Sport fuel cells also feature: * Spring-loaded flapper with no cap for quick fill * One -8 AN tipover valve vent fitting * 2 1/2 in. neck diameter with 2 in. height
Not Yet Reviewed
$624.99
—
$1,252.99
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks and fuel injection-ready tanks. EFI-Ready fuel tank applications are ready to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to—be it a street rod, muscle car, classic truck, or that special ride—Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These EFI-Ready Fuel Tanks are designed for vehicles with engines retrofitted for electronic fuel injection. They have holes pre-drilled for the pump—and the baffling in the tank is suited for electric fuel pumps.
( 73 )
$269.99
—
$338.99
These Tanks Inc. universal fuel tanks feature a 16 gallon holding capacity with a bolt-on neck and billet cap. They accept all popular aftermarket sending units, have an internal pickup tube, and are available in either an EFI or carbureted version. The Tanks Inc. universal fuel tanks that are the EFI version have an internal baffling, with an extra-large 4.3L internal fuel tray to prevent fuel pump starvation.
( 61 )
$289.99
—
$459.99
Auto Metal Direct Spectra Steel OE replacement fuel tanks are part of the most extensive coverage in the aftermarket and are crafted from corrosion-resistant steel that is plated inside and out. Their strong, electrically welded seams are reinforced, and each tank is pressure-tested for leaks. Tank straps and sending units are sold separately. Features include: * Exact fit for easy installation * 100 percent factory-tested * OEM-approved ni-terne steel * Precision-engineered and tooled to meet or exceed OE specifications * Validated for fit, form, and function * Manufactured under ISO 9001-TS 16949 quality system * Transit-tested packaging * 3-year limited warranty * For use with gasoline containing up to 20 percent ethanol (E20) and diesel containing up to 5 percent biodiesel (B5)
( 139 )
$219.99
—
$229.99
Aeromotive Gen II Stealth fuel tanks utilize patented and award-winning Phantom technology. This enables a quiet, high-flow EFI pump and baffle to maintain ample fuel supply around the inlet of the pump—which, in turn, ensures consistent fuel delivery and drivability even in low fuel conditions. The tanks feature outlet and return ports, along with electrical terminals positioned in the OEM location. This design enables flush installation to the vehicle floor and will not require strap modification or spacers. All Gen II Stealth tanks come out of the box completely assembled. The fuel pump, fuel level sending unit, and fuel/electrical bulkhead are pre-installed. As a true plug-and-play assembly, an Aeromotive Gen II Stealth tank will get you out of the garage and on the road in no time. Order the model recommended for fitment on your vehicle.
( 68 )
$780.85
—
$892.25
Positioned beneath the chassis, your fuel tank is vulnerable to weather, rust, leaks, and other potential damage. And with the price of a fill-up, you sure don't wanna be dripping gas on the driveway or the open road. Yes, there are many reasons to consider a replacement fuel tank from Dorman. Tested to meet durability standards, these direct-fit units are corrosion-resistant. Hundreds of models are in stock for a wide range of makes and models. The fuel tanks are available in various size capacities, finishes, and configurations; some include a filler neck, baffled sump, and/or lock ring set. Find the Dorman replacement tank that matches your vehicle specs for a factory-like fit and installation.
( 467 )
$160.99
—
$1,757.99
Jaz Pro Sport fuel cells with 45 degree flapper filler will equip your race car with quality, value, and most importantly—safety. All their Pro Sport models feature seamless, cross-linked polyethylene inner shells enclosed in strong 20-gauge welded steel containers. They're set up with one -8 AN fuel pickup fitting, and with the pickup hose routed to the right rear corner. Jaz offers the choice of your fuel cell to come with or without safety foam, as well as the containers finished in black or red powdercoat for long-lasting good looks. Their long list of sizes, shapes, and capacities are intended to meet your needs and wants perfectly. These Jaz Pro Sport fuel cells also feature: * 45 degree filler neck with spring-loaded flapper 4 1/4 in. high * Choice of 2 1/4 in. or 2 1/2 in. neck diameter * One -8 AN tipover valve vent fitting
( 5 )
$512.99
—
$1,096.99
Be Cool Scirocco-style drag race radiator modules are build for Sportsman and Bracket racings using a super lightweight radiator that features a one-inch core. These featherweight models are available either cradle or flange mounted, with or without a filler neck. Additional details: * Has -20 AN fittings on inlet and outlet * Super lightweight * Crossflow design with one-inch core * Aluminum construction with natural finish * Radiator dimensions: 22 in. wide x 15 in. high * Core dimensions: 18 in. wide x 12 in. high * Core type: Dual one-inch * Includes Single 11 In. puller fan, fan brackets, wiring harness
Not Yet Reviewed
$799.99
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks in applications set up to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to, be it a street rod, muscle car, classic truck, or that special ride, Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These are standard stock replacement tanks for carbureted engine applications. If you have retrofitted your engine for electronic fuel injection, please see the Tanks Inc. EFI-Ready Fuel Tank options.
( 402 )
$274.99
—
$524.99
These OER fuel tank kits were made to replace all of the necessary components on multiple applications. Each kit provides the individual components needed for a complete replacement. When looking to replace your fuel tank, make sure that you take care of everything else with these OER fuel tank kits.
( 12 )
$172.99
—
$551.99
"The cooling is in the copper." Johnson's Radiator Works engine swap radiators feature a 4-row, 2 3/4 in. thick, high-flow copper core, ideal for the best cooling efficiency possible. They are made with heavy-gauge steel side brackets and mounting holes pre-stamped where needed. Antique, vintage, or classic, Johnson's has a radiator guaranteed to cool your vehicle and engine setup. Additional features: * Copper core with one-piece brass tanks * Brass tubes made in-house--125 in. x 0.5 in. * Top tanks stamped from .040 deep draw brass * Quality control start to finish from raw material to finished product * Made with original tooling, equipment, and techniques from Walker * Designed to operate with a 15 to 18 lb. radiator cap (except Flathead application 7 lb. cap recommended) * Brass drain cock
( 2 )
$1,260.00
—
$1,655.00
Few things get your attention as quickly as seeing white smoke billowing out from under the hood—and once stopped, precious anti-freeze all over the ground. OSC Automotive radiators are designed to fit into place as easily as the stock model came out; OEM models are used as a baseline, so their radiators meet or exceed the originals. To ensure great products, OSC starts with the highest grade of raw components, then follows factory construction standards to maintain longevity of the engine and transmission. Transmission and oil coolers are tested before installation on needed units, and radiator cores are qualified before and after assembly using state-of-the-art cycle, vibration, burst, and environment testing. OSC prides itself on solving OE design failures in order to provide radiators with better life expectancies than the originals. Over a thousand models are available for fitment on specific makes and models. Choose the style designed for your engine type and vehicle application.
( 289 )
$287.99
RESTOPARTS® Manufactured reproduction fuel tanks are manufactured reliably and incorporate solid workmanship and quality materials. The better value tank is actually a premium reproduction that includes zinc plating for added corrosion resistance. The galvanized tank is designed exactly as the factory originals were, in galvanized steel, using the exact same methods as GM. Each assembly is identical in appearance, performance, and fit.
( 4 )
$256.99
—
$518.99
BluePrint Engines 350 c.i.d. Cruiser fully dressed crate engines make an great choice for daily drivers and cruising. These fully dressed engines make up to 18 in. of vacuum and work excellent with power brakes, stock torque converter and stock gearing and they will run on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Harmonic balancer * Spark plugs * Spark plug wires * Standard rotation long style water pump * Waterneck and thermostat * Fuel pump * Oil pan * Timing cover * Aluminum intake * HEI distributor * 600 cfm carburetor * Dyno test results shipped with engine
( 28 )
$5,949.00
—
$7,899.00
BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines are available with fuel injection—and base or deluxe carbureted models. SPECIFICATIONS FOR ALL MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Aluminum intake HEI distributor Dyno test results shipped with engine 30 month / 50,000 warranty INCLUDED ONLY WITH FUEL INJECTION MODEL BP3505CTF: * EFI system INCLUDED ONLY WITH BASE CARBURETED MODEL BP3505CTC: * 670 cfm carburetor INCLUDED ONLY WITH DELUXE CARBURETED MODEL BP3505CTCD: * Harmonic balancer * Spark plugs * Spark plug wires * Standard Rotation Long Style Water Pump * Waterneck and Thermostat * Fuel Pump * 670 cfm carburetor
( 9 )
$5,699.00
—
$6,749.00
BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines with fuel injection are offered in two models—one with new block casting, pulleys, and other extras. SPECIFICATIONS FOR BOTH MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Harmonic Balancer Thermostat and Water neck Aluminum intake HEI distributor Spark plugs and wires EFI system Dyno test results shipped with engine INCLUDED ONLY ON MODEL BP3505CTFD: * Standard rotation long water pump INCLUDED ONLY ON NEW BLOCK CASTING MODEL BP3505CTFK: * Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (does not fit Corvette)
( 1 )
$7,149.00
Cold-Case performance aluminum radiators are available and affordable for all. These high-quality, tube-and-fin performance radiators are true OE styles for most applications. Each Cold-Case design distributes fluid more evenly, eliminating hot and cold spots. Also, the massive cores take up the entire width of their tanks, so you get the most efficient cooling possible. The radiators drop-in without modifications needed (on most) and look original. Plus, Cold-Case stands behind its quality and research with a limited lifetime warranty on their products. All Cold-Case radiators feature: * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 630 )
$422.54
—
$899.54
Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 189 )
$588.54
—
$850.54
On Sale
Protect your ride from overheating! Now you can maximize cooling efficiency with Frostbite's performance cooling aluminum radiators. They're engineered to cool more effectively and weigh less than the older OEM-style brass units, enhancing the overall performance of your engine. Frostbite radiators are available in a variety of application-specific fitments, each unit engineered with aircraft-quality aluminum cores, fittings, tanks with billet aluminum filler necks, and OEM-style brass petcocks. A proper cooling system starts with the right radiator—the Frostbite!
( 314 )
$417.95
—
$749.95
RaceQuip Composite FIA racing seats are Pro Racing designed seats with thigh and hip support, integral shoulder and rib bolsters, and accommodates all head and neck restraints. Features include: * One-piece lightweight FRP composite shell * Five seat belt guides handle 4-point, 5-point, or 6-point belts * Energy absorbing foam for comfort and safety * Mesh fabric cover for breathability * Shiny gelcoat finish on exposed areas * Four built-in 6mm side mount fasteners
( 8 )
$599.95
Holley Sniper EFI fuel tank systems will complete your EFI swap. They fit and look like an OE tank, but each Sniper tank is a direct-fit for your application, which means no modifications for you to perform. The tanks are powdercoated galvanized steel for corrosion resistance and lasting good looks. Your Holley Sniper EFI fuel tank kit will include the tank, fuel pump, fuel level sender, and internal baffling. Some kits may also include filler neck and tank straps. Sniper EFI tanks feature: * Fuel pump (255 lph) with hanger assembly gives you the fuel you need with in-tank quietness * Sender has 1/4 in. NPT supply and return line ports for easy connection and a barbed vent fitting * Fuel level sender has the correct ohm range for your factory gauges * Fuel pump and sender are recessed in the tank to provide an easy installation * EFI-style tank baffling includes a large 4.3L internal fuel tray to prevent fuel pump starvation
( 23 )
$749.95
—
$1,099.95
RaceQuip Composite Full Containment FIA racing seats are Pro Racing designed seats with right and left head supports, extra-tall thigh and hip support, integral deep shoulder and rib bolsters, and they accommodate all head and neck restraints. Features include: * One-piece lightweight FRP composite shell * Five seat belt guides handle 4-point, 5-point, or 6-point belts * Energy absorbing foam for comfort and safety * Mesh fabric cover for breathability * Shiny gelcoat finish on exposed areas * Four built-in 6mm side mount fasteners
( 1 )
$849.95
Be Cool factory fit modules provide drop-in convenience, plus the capability of keeping engines up to 1,000 hp (depending on your application) running at the proper temperature! These modules feature Be Cool's factory fit radiator that has two rows of 1 in. tubes to reduce coolant temperatures, a billet filler neck, a drain petcock, and .080 in. wall hand-fabricated aluminum tanks. You can choose either a natural finish or kick it up a notch with the polished finish and dress your engine compartment with shiny performance. Be Cool offers hundreds of models and options for fitment on a wide range of vehicles. Most module kits include a new aluminum radiator, electric fan(s) with mounting brackets, a Be Cool radiator cap, an overflow catch can, and a fan wiring kit.
( 88 )
$1,199.99
—
$3,999.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
