Availability
Showing In Stock Items. Show All 90 Items.
Kooks Headers offers header and GREEN catted connection kits for applications such as Ford Mustang 2 V and 4 V engine models from 1996 and up. Pipes are mandrel-bent from 16-gauge 304 stainless steel. The GREEN catalytic converters are EPA verified 400 cell high-flow and are suitable for use with forced induction. All products are dyno-` and race-tested and designed for maximum power. Kits include all necessary hardware for installation.
Not Yet Reviewed
$3,634.66
Offering high performance exhaust for over 50 years, Kooks header and catted connection kits are designed for maximum power, built from T304 aircraft-quality stainless steel and race tested. Solely for competition purposes, they are offered for a full range a vehicle applications. Kooks header and catted connection kits package long tube headers and a catted X-pipe, H-pipe or Y-pipe.
Not Yet Reviewed
$2,424.29
—
$3,342.56
Kooks Headers long tube headers are heavy-duty and crack-resistant, featuring large diameter stainless steel construction (most applications) with smooth-flowing mandrel-bent tubing. They include gaskets, bolts, and oxygen sensor extensions where required. Also available as kits with connection pipes, depending on the application, Kooks long tube header kits include individual connection pipes, a Y-pipe, X-pipe, or H-pipe to connect to the exhaust system. X-pipes are used primarily for high-rpm performance and race applications. H-pipes create lower end power and are used on street cars for increased performance with a comfortable sound level. These connection pipes are offered in three versions: * Off-road (non-catted) for full track use with no horsepower loss and the loudest exhaust tone * With high-flow catalytic converters; recommended for street driving with little or no horsepower loss and a deeper exhaust tone * With Kooks ultra-high performance GREENCATS catalytic converters; designed for naturally aspirated and forced induction engines up to 900 hp, eliminates most "Check Engine Light" warnings Note: Kooks Headers long tube headers and connection pipes may not be legal for sale, installation, or use in some areas. Check your state and local laws.
( 40 )
$2,002.45
—
$2,596.32
Summit Racing™ universal rod builder exhaust kits come complete with everything that you need to construct the custom exhaust system you've been planning. The pipes are available in a variety of materials, finishes, and diameters. You can cut and weld to your heart's content. These kits have it all! Order the model that best suits your exhaust project. The Summit Racing™ universal rod builder exhaust kits feature: * Four 4 ft. long straight sections of tubing * Four 180 degree mandrel bends * Four 90 degree mandrel bends * Four 45 degree mandrel bends * Hardware and mufflers are not included
( 74 )
$279.99
—
$501.99
Summit Bucks
A dual exhaust system for the masses. Dynomax Header-Back Dual exhaust kits are designed for people who take pride in creating their own custom exhaust. They allow the installer to custom-tailor them to fit vehicles with non-OEM aftermarket headers. They're made from extra-long, 16-gauge aluminized steel for lasting durability, and the tailpipes exit out the sides. All necessary hardware and instructions are included for a complete installation. Mufflers are not included.
( 207 )
$244.99
Manufacturer Rebate
JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.
( 96 )
$886.45
—
$1,035.00
Pypes headers are manufactured from quality 304 stainless steel to ensure top-notch performance and long life. They come available for V6 and V8 applications. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 12 )
$1,456.79
—
$1,866.79
Stainless Power products are designed by Stainless Works, and made exclusively to our exact specifi cations from the highest quality 304 stainless steel. Factory manifolds can be restrictive and hold back the true potential of your ride. Stainless Power headers unlock the power of your engine. Our long tube, free- flowing design reduces back pressure, and will bring new found power that you can feel and hear.
( 18 )
$1,236.90
aFe Twisted Steel headers are constructed of 409 stainless steel tubing with thick, CNC-machined flanges to ensure a leak-free seal. They incorporate a merge collector design, reducing the turbulence that occurs when using the traditional form collector-style designs. The performance gains are obvious when coupled with a high-flow Y-pipe. The aFe headers feature a tuned length primary that is out-flowing the stock manifolds by as much as 46 percent. Order the style and configuration tailored to your vehicle and engine application.
( 20 )
$1,999.00
—
$2,634.45
American Racing Headers C7 Corvette headers are available with options that allow you to fine-tune your exhaust system to match your upgrades. ARH C7 systems set the bar for quality, performance, fit, and ease of installation. Options include a variety of primary sizes and your choice of X-pipe midsection diameters, ARH's exclusive X-pipe forward location (on select models), and severe-duty cats. Long systems end at the rear axle and are a direct fit to stock or aftermarket axle-back exhausts. ARH also offers mid-length header systems; a more emissions friendly option for C7s. Their mid-length kits allow you to reuse the secondary set of factory cats combined with ARH's severe-duty catalytic converters. These systems improve performance yet significantly reduce the possibility of a check engine light. All ARH C7 kits are direct bolt ons; expect a quick and easy install with the included Grade 8 hardware, race-quality gaskets, and stainless steel band clamps (where applicable). They will surpass your expectations in quality and performance. Additional features of American Racing Headers C7 Corvette headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell metallic substrate catalytic converters for extreme durability * The only set of headers you'll ever need to buy * All American Racing Headers exhaust systems are for off-road use only
( 1 )
$2,908.16
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 3 )
$3,546.95
Crown Automotive replacement header panels provide framework and mounting locations for front-end components like the grille, headlights, turn signals, and more. If header panels are in poor condition, they should be upgraded so the front-end can be reinstalled and aligned properly. Their design, function, and included parts vary according to your vehicle. Crown header panels are available individually or as a kit. Match your year/make/model to the correct panel frame for a precise fitment.
( 7 )
$309.99
—
$593.99
Flowtech Super Street Dual exhaust kits offer a top-quality, custom-fit dual exhaust system at a price that couldn't be more affordable. They feature fixture-formed, 2.25 in., 16-gauge tubing for increased performance, and a custom fit for both factory manifolds and aftermarket headers. These kits include everything from the header flange back to the tailpipe, excluding mufflers.
( 77 )
$258.95
—
$313.95
Flowmaster pipe kits are just like the Flowmaster exhaust systems except they don't include mufflers. This allows more flexibility in choosing the right sound for your vehicle while still providing the convenience of a pre-bent exhaust system.
( 20 )
$585.95
HushMats complete vehicle insulation kits serve two important functions: reducing thermal transfer into your interior, and reducing the noise level by up to 15 decibels. Your engine, headers, manifold and exhaust generate tremendous heat that transfers to the metal firewall and floor—forcing your A/C system to work harder to maintain a comfortable environment. HushMat auto heat shield is proven to lower this temperature by over 40 percent. At the same time, when you drive on the highway at 65 mph, most vehicles approach 80 to 90 decibels of noise. That's like a vacuum cleaner or garbage disposal running on your passenger seat. These insulation kits use a specially designed sound deadening material to deliver a more peaceful ride. Each kit is packaged specifically for your vehicle to provide 100 percent insulation coverage—no holes in the material and no puzzle pieces to assemble. Treat your firewall, doors, floor, tunnel, rear wheel wells, trunk floor, and roof with these HushMat barriers. Order the complete insulation kit designed for your specific vehicle. Additional details: * Reduces road noise and vibration, low-frequency noise from 0 to 1,000 Hz * Stay warmer in the winter and cooler in the summer; withstands ambient temps from -30 up to +550 degrees F * Lightweight and super flexible mats; less than 1/8 in. thick and 0.47 lbs. per sq. ft. * Adhesion is guaranteed; no alcohol or acetone wash needed; no tools required * Trims easily with standard razor knife or household scissors * Self-adhesive peel-and-stick; no glue required * Outperforms closest competitive brand by over 40 percent * OEM approved; meets or exceeds auto damping specs GMO 149M – General Motors; WSB-M5G58-A1 – Ford; and MS-CD 629 Type C – Chrysler
( 1 )
$1,082.11
—
$1,151.09
Get the most from your high performance mods with these Summit Racing™ dual exhaust systems for header-equipped passenger cars. The systems feature aluminized or 409 stainless steel tubing that is mandrel-bent for high exhaust flow, increased horsepower, and reduced backpressure. These header-back exhausts are available in dozens of configurations for proper fitment on a wide range of vehicles, both manual and automatic. Your options include material, finish, exit location, and pipe diameter. Feel the power when you're equipped with a Summit Racing™ dual exhaust system!
( 634 )
$339.99
—
$577.99
Pypes header/crossmember-back exhaust systems are designed to boost your car's performance to the next level with more power and better mileage. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge stainless steel pipe. Also included are stainless steel hangers, clamps, and instructions; their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model recommended for your vehicle.
( 13 )
$543.79
—
$1,260.79
Kooks Headers offers a variety of exhaust systems designed for specific vehicles. They feature large diameter 304 stainless steel construction with smooth-flowing mandrel-bent tubing for maximum exhaust flow. Among the options are street and OEM-style replacements, or high-rpm performance and race applications. Choose from styles such as header-back, cat-back, rear axle-back, and full-length. Look over the available options and select the model designed for your vehicle. Depending on the system you order, specs/configurations may include: * One or two mufflers, or a muffler-delete system * Muffler style: wrapped perforated core, turbo, perforated tube, glasspack * Components with a natural or polished finish * Single or dual inlet/outlet * Catalytic converter (where applicable) * Intermediate pipe (where applicable) * Tailpipe; different diameters available * Round tip(s), polished or black coated, various styles Some Kooks Headers exhaust systems are offered in one of three versions: * Off-road (non-catted) for full track use with no horsepower loss and the loudest exhaust tone * With high-flow catalytic converters; recommended for street driving with little or no horsepower loss and a deeper exhaust tone * With Kooks ultra-high performance GREENCATS catalytic converters that eliminate 90 percent of "Check Engine Light" warnings; designed for naturally aspirated and forced induction engines up to 900 hp Note: Certain exhaust systems may not be legal for sale, installation, or use in certain locales. Check your state and local laws.
( 14 )
$468.41
—
$2,185.17
Pypes High Tuck header/crossmember-back exhaust systems allow for the most ground clearance of any A-body system on the market. The X-pipe pushes the mufflers up into their installation pockets and the tailpipe sits higher coming out of the muffler. No more bottoming out! Pypes High Tuck header/crossmember-back exhaust systems are designed to boost your car's performance to the next level—you will get more power and better mileage. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge stainless steel pipe. Also included are stainless steel hangers, clamps, and instructions. Their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model recommended for your vehicle.
Not Yet Reviewed
$753.79
—
$806.79
Doug's Headers offers LS Swap exhaust systems for a wide range of vehicles, including many Chevy, Buick, Oldsmobile, Pontiac, and GMC models from the 1960s and '70s. They feature mandrel-bent 304 stainless steel for maximum flow and long-lasting durability. Each system contains a stainless muffler and H-pipe or X-pipe design for a true muscle car sound. These exhausts tuck up tight with the Doug's transmission crossmember for maximum ground clearance. All brackets and hardware are included for a true bolt-on installation; and the exhausts are compatible with Doug's LS Swap headers. Order the system recommended for fitment on your vehicle.
( 1 )
$1,071.60
X-pipes are used primarily for high-rpm performance and race applications. Kooks Headers X-pipes are heavy-duty and crack-resistant, featuring large diameter stainless steel construction with smooth-flowing mandrel-bent tubing. Most are designed to be used with Kooks long tube headers. Some applications require cutting the factory exhaust system. Select models connect to the OEM connection point. Kooks Headers X-pipes are offered in three versions: * Off-road (non-catted) for full track use with no horsepower loss and the loudest exhaust tone * With high-flow catalytic converters; recommended for street driving with little or no horsepower loss and a deeper exhaust tone * With Kooks ultra-high performance GREENCATS catalytic converters; designed for naturally aspirated and forced induction engines up to 900 hp, eliminates most "Check Engine Light" warnings Note: Kooks Headers X-pipes may not be legal for sale, installation, or use in some areas. Check your state and local laws.
( 7 )
$2,353.21
Metro Moulded SUPERsoft basic weatherstrip kits deliver on their name! These kits include all of the vital pieces of weatherstripping that you need to get your restoration or repairs started right. In addition, SUPERsoft brand sponge rubber provides extraordinary resistance to the hardening and decay caused by exposure to ozone and UV light. Order the model designed for fitment on your specific vehicle. Basic kits for 2-door hardtops include: * Door seals * Roof-rail seals * Trunk seals Basic kits for convertibles include: * Door seals * Convertible top seals (including the header seal in most cases) * Trunk seals Basic kits for sedans include: * Door seals * Trunk seals
( 85 )
$240.99
—
$311.99
Doug's Headers offers engine swap transmission crossmembers for a variety of classic Chevrolet and GMC applications. They are CAD-CAM designed, welded steel with a durable black powdercoat finish for proper fit, strength, and appearance. Ideal for 2WD trucks with GM LS and LT engines, one part number fits with ALL popular late-model manual and automatic transmission swaps. The crossmembers come complete with necessary hardware and detailed instructions. Notes: * Designed to clear up to 3 in. exhaust systems with no loss of ground clearance * Designed for use with Doug's Headers line of LS engine swap products
( 5 )
$335.25
Summit Bucks
Dynomax dual kits are complete, universal, dual exhaust systems designed to perform with Dynomax headers or stock manifolds. Their special reducer design allows for a variety of mounting options, with extra-long, 16-gauge tailpipes with side exits. These kits include all needed hardware and instructions. Mufflers are not included.
( 66 )
$233.99
—
$256.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
