Availability
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$7,308.00
—
$14,355.00
Ready to take your 2024 5.0L Mustang GT to the pinnacle of performance? Roush Phase 1 supercharger kits are engineered to transform your Mustang into a 740 hp powerhouse with unbeatable durability, cooling, and power delivery. The 740 hp, 600 lbs.-ft. of torque Roush S650 Mustang Phase 1 supercharger kit is engineered to provide exceptional performance through innovative design and cutting-edge components, tailored specifically for Mustang enthusiasts seeking peak horsepower and reliability. Roush achieved a 10.55 second 1/4-mile at 133 mph and 0-60 3-seconds with a 1.39G acceleration force on a stock car with this supercharger and slicks on a prepped track (10R80 automatic transmission, 3.55 rear gear ratio). Additional product features and benefits: * This supercharger features a dual front inlet and front-drive setup, maximizing airflow with an optimized, high-flow inlet port. It's designed for ultimate airflow capacity, ensuring your engine breathes freely to produce unparalleled horsepower. * The supercharger head unit boasts a unique Roush Red finish, adding an unmistakable, high-performance look to your engine bay. * The kit reuses the factory twin 80mm throttle bodies, retaining a symmetrical appearance and allowing you to reuse stock induction components for a clean and streamlined look. * Featuring an inverted design, the Roush Phase 1 kit houses dual high-efficiency intercoolers. This setup maximizes heat transfer while lowering intake air temperatures, keeping your engine cool under high demand. * High-Flow Dual Cone Fuel Injectors: Equipped with optimized director plates, the injectors target fuel precisely for efficient combustion and enhanced performance. * Billet aluminum fuel rails provide maximum flow with minimal restriction, ensuring correct injector alignment and a consistent fuel supply to meet the demands of high performance driving. * Designed with a custom FEAD, 90mm pulley, and strategic hardware placement, the supercharger belt runs closer to the engine, reducing crankshaft load and enhancing overall reliability. * The large front heat exchanger delivers exceptional intercooling with minimal restriction to the factory cooling module. Its custom design makes installation straightforward, with no need to remove the front fascia, saving install time and minimizing any risk of damage. * Each kit includes a high-capacity degas bottle that prevents coolant aeration, offering superior cooling capacity for consistent performance. * The intercooler pump is a high-flow Bosch PCE model, delivering reliable cooling to support long-lasting supercharger performance. * Every hose in this kit is custom-formed to ensure a clean installation and streamlined underhood appearance, making the system as easy to install as it is to admire. * The entire kit is engineered to fit beneath the stock Mustang hood and K-brace without any modification. The K-brace doesn't need to be removed, making installation simpler and preserving the structural integrity of your Mustang. * All wiring is plug-and-play, offering a smooth and straightforward installation process. * Colder heat range spark plugs with a reduced gap come pre-installed, ensuring optimal performance and durability under increased boost. * The kit is calibrated with Roush's Diagnostic Tuning Software, delivering best-in-class performance while maintaining seamless diagnostic capabilities. This software ensures the kit runs smoothly while adhering to Roush's high standards. * Developed in partnership with Magnuson, a company with over 50 years of supercharging experience, this kit brings together Roush's and Magnuson's expertise for a product that excels in performance, durability, and innovation.
Not Yet Reviewed
$9,995.00
Gear up for your next off-road adventure with complete Performance Package upgrades from Holley Off-Road. They deliver performance systems from exhaust to brakes, tuners, suspension, and more, and their products are engineered to work together, ensuring you have everything you need to have fun on and off the road. Your Bronco was born to run and with Holley Off-Road 2021-24 Ford Bronco performance packages for 2-door models, you'll have top-of-the-line performance parts working together seamlessly to elevate your driving experience. The ADS direct-fit adjustable reservoir race coilovers provide suspension adjustments needed for superior control and handling, the Big Claw performance rotors offer improved braking power, and the ADS heavy-duty sway bar end links, adjustable track bar, and tubular heavy-duty control arms provide added stability and durability, along with precise handling and strength in key suspension areas. Completing the packages is a Flowmaster Signature Series exhaust system, adding performance and an aggressive to moderate exhaust note, while a Pulsar XT tuner allows tuning adjustments to optimize engine performance. By buying everything together, you're not only enhancing multiple areas of your vehicle at once, but you're also ensuring that all the parts are compatible and working in harmony to elevate your driving experience. Features: * Flowmaster Signature Series: Brushed 304 stainless steel delivers incredible gains of 17 hp and 18 lb.-ft. at the rear wheels. TIG-welded and black chrome exhaust tips * Pulsar XT tuner adds: -- Up to 55 hp/69 torque at peak to 2.7L -- Up to 26 hp/69 torque at peak to 2.3L -- Up to 45 hp/77 torque at peak to 3.0L Raptor * Baer Big Claw brake rotors: Larger than stock rotor for increased brake torque and reduced stopping distance * ADS Racing coilovers: Large bore 2.5 in. shock body provides increased fluid capacity, resisting shock fade, resulting in increased performance for your off-road adventures * ADS adjustable heavy-duty sway bar end link: Improved durability, strength, and looks over factory sway bar end links and increased adjustability for lifted/long travel applications * ADS adjustable rear panhard bar: Keep your rear-end properly centered with this essential upgrade, where strength and adaptability converge for an unparalleled journey off the beaten path. * ADS front control arms: Corrects camber and caster, accommodating lifts up to 4 in. * ADS rear control arms: Adjustable and accommodates lifts up to 6 in.
Not Yet Reviewed
$9,773.95
Gear up for your next off-road adventure with complete Performance Package upgrades from Holley Off-Road. They deliver performance systems from exhaust to brakes, tuners, suspension, and more, and their products are engineered to work together, ensuring you have everything you need to have fun on and off the road. Your Bronco was born to run and with Holley Off-Road 2021-24 Ford Bronco performance packages for 4-door models, you'll have top-of-the-line performance parts working together seamlessly to elevate your driving experience. The ADS direct-fit adjustable reservoir race coilovers provide suspension adjustments needed for superior control and handling, the Big Claw performance rotors offer improved braking power, and the ADS heavy-duty sway bar end links, adjustable track bar, and tubular heavy-duty control arms provide added stability and durability, along with precise handling and strength in key suspension areas. Completing the packages is a Flowmaster Signature Series exhaust system, adding performance and an aggressive to moderate exhaust note, while a Pulsar XT tuner allows tuning adjustments to optimize engine performance. By buying everything together, you're not only enhancing multiple areas of your vehicle at once, but you're also ensuring that all the parts are compatible and working in harmony to elevate your driving experience. Features: * Flowmaster Signature Series: Brushed 304 stainless steel delivers incredible gains of 17 hp and 18 lb.-ft. at the rear wheels. TIG-welded and black chrome exhaust tips * Pulsar XT tuner adds: -- Up to 55 hp/69 torque at peak to 2.7L -- Up to 26 hp/69 torque at peak to 2.3L -- Up to 45 hp/77 torque at peak to 3.0L Raptor * Baer Big Claw brake rotors: Larger than stock rotor for increased brake torque and reduced stopping distance * ADS Racing coilovers: Large bore 2.5 in. shock body provides increased fluid capacity, resisting shock fade, resulting in increased performance for your off-road adventures * ADS adjustable heavy-duty sway bar end link: Improved durability, strength, and looks over factory sway bar end links and increased adjustability for lifted/long travel applications * ADS adjustable rear panhard bar: Keep your rear-end properly centered with this essential upgrade, where strength and adaptability converge for an unparalleled journey off the beaten path. * ADS front control arms: Corrects camber and caster, accommodating lifts up to 4 in. * ADS rear control arms: Adjustable and accommodates lifts up to 6 in.
Not Yet Reviewed
$9,773.95
BD Diesel Roadmaster transmission and converter packages can provide your truck with superior performance, durability, and redefined reliability and efficiency in every gear. These packages deliver a fully remanufactured Roadmaster with either a remanufactured or modified valve body, a BD deep transmission pan for increased fluid capacity and improved cooling, and a ProForce torque converter. RoadMaster transmissions are designed for longevity and enhanced drivability, and includes key upgrades to outperform stock units while maintaining comfort and efficiency. Select the package designed for your truck.
Not Yet Reviewed
$5,490.00
ATK High Performance Chrysler 360 Magnum 350 HP complete long block crate engines incorporate Engine Quests upgraded casting with the following benefits: * Thicker deck for greater strength * Improved design resists cracking * Superior port finish for increased flow * Water flow redesigned for greater thermal conductivity * Hardened exhaust seats * CNC-machined guides and seats Engine specifications: * HP: 350 * TQ: 430 * Block: OE Magnum roller block 1993-2001 * Bore/stroke: 4.040 in. x 3.580 in. * Displacement: 360 cu. in. * Crankshaft: OE cast * Rods: OE 6.123 in. * Pistons: Hypereutectic 9.3:1 compression * Rings: Chromoly * Camshaft: Hydraulic roller * Cam specs: 207/217 at 50 .496/.496 112 LSA * Timing chain: Double roller * Cylinder heads: New upgraded Engine Quest cast iron 62cc/172cc 1.78/1.50 * Rocker arms: Steel 1.6 pedestal rockers * Oil pan: 5 qt. OE front sump * Oil pump: Melling STD volume * Balancer: Externally balanced * Intake manifold: Edelbrock performer RPM air gap dual plane * Distributor: Pro billet RTR (Iron Gear) * Water pump: OE early pump * Carburetor: Quick Fuel 680 cfm vacuum secondary's electric choke * Fuel pump: Holley mechanical 110 gph * Spark plugs: Autolite * Spark plug wires: 8mm
Not Yet Reviewed
$6,898.99
On Sale
Spicer Driveline Ultimate Dana 44 AdvanTEK crate axle assemblies offer increased strength and durability in every facet—from thicker bracket mounts to upgraded materials to beefier housing tubes. Strength, versatility, bolt-in convenience, and a rock-solid history: it all comes together harmoniously in the Ultimate Dana 44 AdvanTEK crate axle assemblies from Spicer Driveline. Order the model with the ring and pinion ratio needed for your application. Spicer Ultimate Dana 44 AdvanTEK advantages: * Aggressive nodular iron differential cover * Heat-treated high-grade SAE-4340 chromoly steel axle shaft offers superior abrasion resistance and strength, as well as uniform surface * Thicker steel bracket mounts * Upgraded U-joints outperform the competition, with Nm load ratings of 3000 (1350 Series) and 3600 (1400 Series) * Thicker tubes for added strength * Custom high-clearance housing is designed to optimize extreme off-road performance * Expanded gear ratio options to accommodate different tire sizes * Genuine Spicer AdvanTEK ring and pinion gears for greater strength * Track width is identical to OE track width * No FAD (front axle disconnect) means increased strength * Selectable E-Locker
Not Yet Reviewed
$5,699.99
$5,129.99
TeraFlex CRD60 HD semi-float axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles including Rubicon models. They can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axle's weak areas. These rear axle assemblies feature TeraFlex's exclusive Constant Radius Design (CRD) that provides high ground clearance and is unaffected by pinion angle adjustments. They are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength, and the heavy-duty axle housings feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more! A variety of kits are available to cover several Jeep applications. A complete Tera CRD60 HD rear axle assembly with semi-float includes an ARB air locker, a choice of pre-installed Spicer Super 60 ring and pinion gears, as well as Spicer Super 60 bearings, semi-float rear axle shafts, and sensors. Kits are also offered without ring and pinion gears, locker, and carrier. Choose a kit created for your Jeep model. Features: * Factory-style semi-float axle design * 3.25 in. O.D. x 0.375 in. wall DOM axle tube for superior strength verses weight * Fixed spindle mount hub assembly * Tera CRD60 specific high-pinion rear axle housing design * Includes Spicer 1350 Series pinion yoke * Heavy-duty bearing caps increase rigidity and reduce ring and pinion distortion * Built-in "skimmer" cuts ring gear oil halo and forces it into the pinion bearings * Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing * Oversized outer pinion bearing handles increased torque and high-load conditions * High-capacity housing holds maximum amount of oil * Pre-installed inner axle seals * Ductile cast iron housing with increased rib gussets * Heavy-duty ductile iron differential cover with increased cover mounting area * Integrated lower control arm skid plates * High-flow oil passages * Reinforced rear track bar mount with multiple mounting locations * UV protected triple-stage powder coat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * Pre-installed upper control arm bushings * Proper pinion angle for lifted applications * Pre-tapped hole on spring perch for bump stop extensions * Retains all ESP, ABS, and speedometer sensor capability
Not Yet Reviewed
$5,548.99
—
$6,462.99
A quality jointer is the foundation of any work shop, and the Powermatic Parallelogram jointers provide the accuracy, precision, and superior features you need to begin every project with confidence. Loaded with features, each machine has an extra-long 82 in. bed length for better work support and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching surface during adjustments. The jointers' powerful motor is totally enclosed in a heavily constructed steel stand to provide plenty of power for even the most demanding jobs. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and also allows for a fast depth of cut adjustment to ensure that the table remains perfectly parallel—even after many years of tough duty. Highlights and features: * Motor (TEFC): 2HP/1PH/230 V * Large 8 in. x 82 in. precision-ground cast iron table surface for heavy-duty work * Available with 54 four-sided carbide inserts on the helical cutterhead or a 3-blade, high-speed steel straight knife cutterhead * Patented worm-gear handwheel fence tilting for versatility * Parallelogram design for close table-to-cutterhead proximity and fast depth of cut adjustment * High-mount switch and control box for operator convenience * Parallelogram design allows for easy and accurate adjustment of tables * Fence Tilt: 45 degree forward/backward * Fence Positive Stops (degree): 45, 90, and -45 degree * Cutterhead Speed: 7,000 rpm * Dust Port Diameter: 4 in. * Maximum Width Cutting Capacity: 8 in.
Not Yet Reviewed
$5,202.00
Instant Rebate
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$13,202.00
—
$13,863.00
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$13,863.00
Instant Rebate
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$13,863.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
