Availability
Showing In Stock Items. Show All 289 Items.
Mittler Brothers rear-end narrowing tool kits are designed to narrow your vehicle's rear-end for racing or street rod applications using precision-made tools. They include a 1 1/2 in. diameter turned, ground, and polished shaft that is passed through the trimmed rear-end housing (not included) and the inner bearing blocks. This ensures the accurate, square, and true, reinstallation of the housing ends. The kits feature a pinion centering plate and a variety of alignment blocks for specific housing ends, including Ford 9 in., Ford 8.8 in., 10-bolt GM, 12-bolt GM, Dana 44, Dana 60, and 8 3/4 in. Chrysler.
( 11 )
$662.40
OTC Jeep/truck ball joint sets come with a complete set of adapters and special large C-frame to remove and install ball joints on many Chrysler/Dodge light-duty trucks, as well as Jeep Cherokee, Grand Cherokee, Wrangler, and Liberty vehicles. The high-clearance C-frame allows for the repair of the most recent vehicles, and each set is enclosed in a blow-molded case with application chart and instructions.
( 6 )
$652.99
Stand and stretch—or shrink—with Baileigh Industrial MSS-16 Metal Shrinker Stretcher stands. These strong metal units offer an option to mounting your shrinker/stretcher. They provide foot-operated efficiency and a secure base. Mount your MSS-16 on Baileigh Industrial stands. Order the model preferred for your applications.
( 1 )
$538.65
Rhodes Race Cars rear end housing narrowing fixture kits allow you to "slim down" your rear end to get some additional clearance. Available with 60 in. or 72 in. lineup bar, each kit includes pinion centering plate, housing end outer pucks, and outer diameter inner pucks. Choose the kit preferred for your application.
( 1 )
$674.95
OEM Automotive Tools telescopic transmission jacks and a good hydraulic lift take the hassle out of pulling your vehicle's transmission. These heavy-duty steel jacks feature strong safety chains, tilt-adjustable saddles, and four heavy-duty castors on a wide base. The jacks come in handy for many uses around the shop, and their manual hydraulic systems make lifting and lowering items smooth and seamless. Whether they're being used for pulling, test fits, or installing, OEM telescopic transmission jacks make the job easier. They're available in models with different height ranges.
( 14 )
$599.95
OEM Automotive Tools 21-gallon oil drain vacuum and fluid extractors are designed for the collection of used fluids, including motor oil, transmission fluid, and coolant from underneath a lift-mounted vehicle—or by evacuation directly from fluid reservoirs or through dipstick tubes. The portable oil drain system is designed to safely capture oil and other vehicle fluids with the use of a large funnel or vacuum. Product features: * Discharge hose length: 82 in. * Funnel diameter: 15 in. * Funnel extension adapter: 22 in. * Funnel height adjustment: 45 in. to 62 in. * External air supply is required * Includes four extraction tube sizes
( 1 )
$694.48
Whether you are painting or repairing, Keysco pick-up bed dollies help you work and move that bulky truck bed around the garage. You can get it off easily enough, but what do you do with it once it's loose? These dollies give you someplace to set it and move it around easily, giving you access to the frame and underworking of your vehicle. Make it easy to paint and modify your vehicle as you desire, then simply roll the bed back over to the truck and reattach it. Features include: * Light weight, but strong – holds up to 1,000 lbs. * Holds beds large and small * Has 4 in. locking swivel casters * Folds flat in seconds * Heavy wall 1-piece construction * Now comes with 4 or 6 casters * Collapsible for storage
( 3 )
$533.99
Lang Tools axle nut sockets are designed for use with a torque wrench when servicing truck wheel bearing locknuts. These performance-proven, quality axle nut sockets are offered in an array of sizes to fit any need. Features to choose from: * 3/4 in. square drive or 1/2 in. square drive * Full range of six- and eight-point sizes * Individual metric and standard sizes, as well as sets are available * Steel with gray powdercoat or chromoly with black phosphate finish
( 2 )
$725.99
Ensure unparalleled safety with the Sunex 20-ton shop press shields, specifically engineered for Sunex Tools presses. The shop press shields primary purpose, like the Sunex Tools SPS20 model, is to protect users from flying debris during pressing operations. The shield boasts spring-loaded locking levers for adjustable coverage and an aluminum frame to allow simple positioning, making it a crucial addition for any workspace. Product features: * Shop press safety shields are custom built for Sunex presses and provide ultimate safety and compliance with the ASME PASE: 2019 standard * Sunex Tools shop press shields offer protection from flying debris * Spring loaded locking levers position the shield at various heights to cover the work area * Shield frame constructed of aluminum extrusion for easy positioning
Not Yet Reviewed
$774.99
K Tool aluminum service jacks are designed for cars and light-duty truck applications. These jacks have a lightweight aluminum design for convenient transport, yet they're strong enough to handle most jobs. If you're looking for a high-quality, lightweight jack for your garage, these aluminum jacks by K Tool will provide efficient service over the long haul. Additional features: * Strong, 3-ton capacity, but weighs only 58.4 lbs. * Dual pump system for quick lifting (7 strokes to top under no load) * Lifting range 3 3/4 in. up to 19 1/4 in. * "D" side handle for easy positioning * 2-piece handle for easy storage * Includes handle pad for protecting the vehicle
( 2 )
$538.99
Sunex Tools impact sockets are machined from chromoly steel with a protective black finish for long life and dependability. Socket options include: standard or metric; drive size; deep well socket type and sizes; short well socket type and sizes. Some sets also contain extensions. Sunex impact sockets are available individually—or in various sets with a heavy-duty, blow-molded storage case.
( 84 )
$565.99
—
$704.99
OEM Automotive Tools low-profile floor jacks are built for efficiency and performance. Available in models capable of lifting 2 tons or 3 1/4 tons with minimal effort, they will be valuable additions to your garage or workshop for increased productivity. Both professional quality models are equipped with 360 degree rear swivel casters and padded handles, so you can quickly and easily position the jacks in any application, especially low-clearance vehicles, without scratching or denting vehicle while pumping jack. OEM Automotive Tools low-profile floor jacks meet ASME 2014 standards.
Not Yet Reviewed
$549.00
—
$599.00
These Sunex Tools drill presses are packed full of features that make them useful around your shop. The 3/4 hp electric motor powers though even the toughest materials and gives you the options of 16 speeds. The 5/8 in. chuck allows you to use a wide variety of bits, and the heavy-duty steel table securely holds whatever you are working on. The table is also capable of rotating 360 degrees and tilting up to 45 degrees in either direction to help you complete your job. Sunex Tools combines all of these features with a heavy-duty base and column for added strength and rigidity, and you end up with one of the best floor drill presses available.
Not Yet Reviewed
$690.99
K Tool geared engine stands are 1,100 lb. capacity units with gearbox rotation that folds up to a compact size for convenient storage when not in use. They have a gear-driven rotation with 1:63 ratio for easy turning with adjustable fingers to provide easy engine mounting. Additional features: * 6-wheel design for easy maneuvering--even when folded * Cast steel gearbox for extra strength and long life * Grease fittings on gearbox help extend product life * Complies with ASME PASE/2014 Safety Standards
( 2 )
$735.99
K Tool 12-ton hydraulic shop presses are heavy-duty, H-frame designs constructed from high-grade steel with an oil-and dirt-resistant surface for easy cleanup. K Tool offers different versions to choose from—one with a double speed pump. They comply with ASME PASE/2014 Safety Standards.
Not Yet Reviewed
$816.99
Sunex Tools 20-ton air/hydraulic truck jacks are high-quality tools that are made of superior-quality steel with a red finish. They feature a narrow chassis design that easily fits between tandem wheels, and a hand grip that allows them to be stored in a vertical fashion. Their wiper seals protect their hydraulic system from contamination, and their 5 in. composite wheels make maneuverability easy. They also have a self-retracting arm and their overload and safety valves prevent them from being used beyond their rated capacity and ram overextension. If a superior quality truck jack is what you want, Sunex Tools has what you need.
( 1 )
$649.99
Versatile and tough enough for both professionals and do-it-yourselfers, OEM Automotive Tools parts washers are constructed of heavy-duty 20-gauge steel—and powdercoated for rust resistance. They feature fully adjustable flexible nozzles, component shelves, easy-to-maintain solvent pumps that flow up to 325 gph, and reliable 120 V motors. OEM Automotive Tools parts washers are available in small, medium, and large capacity sizes to accommodate any parts you need to clean.
( 4 )
$726.99
Dashes Direct original Ford tooling dash pads are produced exactly as the OEM pads, using the original factory Ford tooling. They're made from the highest automotive grade materials for a true OEM fitment and look.
( 30 )
$534.99
Milwaukee M18 FUEL 10 in. dual bevel sliding compound miter saws meet the demanding needs of professional carpenters and remodelers, proving to be viable solutions to replace their corded saws. Designed for easy operation and repeatable, accurate cuts, they deliver greater capacity and corded cutting performance with their POWERSTATE brushless motors powered by M18 REDLITIUM batteries that will allow you to do a full day's work with up to 400 cuts per charge. Milwaukee M18 FUEL 10 in. dual bevel sliding compound miter saws include many premium features and are offered individually (tool only) with carbide tipped blade, blade wrench, clamp, and dust bag; or in kits that will also include battery and charger. Additional features: * REDLINK PLUS Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection, and productivity * 5 3/4 in. vertical capacity (baseboard against fence) * 2 x 12 in. horizontal capacity (lying flat at 90 degrees) * 5 1/4 in. vertical capacity nested crown * Cam-locking miter system * Adjustable stainless steel detent plate and 11 detent locations * Dual bevel with 9 detents and easy access bevel adjustment lever * Shadow cut line indicator for quickly lining up cuts * Detent override for easily setting miter locations outside of detents * Tall sliding/removable fences to support large base and crown against fence * Easy access blade change * Top and side carrying handles for maximum portability
Not Yet Reviewed
$549.00
JET Sliding Dual Bevel Compound Miter Saws are available in 10 in. and 12 in. models. They feature machined aluminum construction and high-visibility red laser for precision cuts. These are the most versatile saws for cutting miters, bevels, straights, and compounds. You'll love the ergonomic rubber grip handles and the compact design for easy mobility.
Not Yet Reviewed
$532.99
OTC engine stands are made from heavy-duty materials designed for servicing light truck and car engines. These engine stands have four adjustable mounts to fit most engine blocks and they make work easy with a 24 in. handle to rotate your engine 360 degrees. Fixed polyurethane back wheels and poly swivel castors on the front allow for smooth travel around the garage.
( 1 )
$744.99
You won't believe how smoothly these JET bench grinders run! They are great power tools that show tremendous attention to detail. Well-built, with a powerful motor, these bench grinders are more than capable of handling any job that the average homeowner would encounter, as well as withstand the high-volume demands of even the busiest shops. These high-quality machines are designed to grind, sharpen, and smooth out rough material surfaces—delivering work power and pristine finishes! Additional features: * UL listed * Totally enclosed pre-lubricated ball bearings * Rubber mounts prevent movement * Cast iron wheel guards and dust vents * Includes aluminum oxide grinding wheel * One-piece quick-adjusting spark guards * Large eye shields with quick adjustment * Adjustable tool rests * Fine and coarse vitrified grinding wheels included
( 4 )
$719.99
Special Offer
Designed with maneuverability in mind, the Milwaukee M18 FUEL short pole hedge trimmers provide the power to cut 1 in. thick branches and have a lightweight design for quick shaping and provides more maneuverability for clean cuts. This solution features robust 20 in. double-sided blades for faster and more aggressive cutting in addition to a balanced design providing superior ergonomics in use. The short pole hedge trimmers include a tip guard to prevent damage to the blade and surrounding work area, as well as a padded grip and bail handle grip for optimal hand placement and increased comfort. REDLINK PLUS Intelligence offers total system communication between tool and battery for unmatched levels of performance, protection, and productivity. When paired with Milwaukee's M18 REDLITHIUM FORGE XC8.0 battery pack (not included with bare tool), this hedge trimmer provides users with up to 90 minutes of run time. The M18 FUEL short pole hedge trimmers are compatible with 275+ solutions on the Milwaukee Tools M18 system. Product Overview and features: * Available as a bare tool only (without battery pack) or in kit form that includes (1) M18 FUEL short pole hedge trimmer, (1) M18 REDLITHIUM FORGE XC8.0 battery pack and M18/M12 rapid charger, and blade sheath (please specify bare tool or kit when placing your order) * Lightweight and ergonomic design provides more maneuverability for fast, precise trimming * POWERSTATE brushless motor delivers 3,500 strokes per minute—perfect for routine hedge maintenance * 20 in. double-sided dual-sharpened blades * Bail handle and padded pole grip provide added control—the multiple grip points, in addition to the double-sided dual sharpened blades increase control for more precise, clean cuts * Reaches full throttle in under 1 second, boosting productivity and control * Blade tip guard prevents damage to blades and property * 1 in. blade gap * 71 in. total tool length * Fully compatible with the Milwaukee Tools M18 System—featuring over 275+ solutions
Not Yet Reviewed
$599.00
Special Offer
The Milwaukee M18 FUEL edger's are designed to meet the performance, durability, and ergonomic needs of landscape maintenance professionals. The edger's POWERSTATE brushless motor delivers more power than 31cc gas to take on demanding applications like edge creation and maintains a higher blade speed to create clean edges faster. These fixed shaft edger's are lighter weight and have less vibration, reducing fatigue. The M18 FUEL edger's reach full throttle in under 1-second, increasing productivity, and includes a site line on the guard, steel skid plate, and blade wear indicator to providing more control and increase productivity. Milwaukee's REDLINK PLUS Intelligence enables full-circle communication between the tool and battery, providing you with unmatched levels of performance, protection, and productivity. These edger's are optimized for use with Milwaukee's M18 FUEL REDLITHIUM FORGE HD12.0 battery (not included with bare tool) to provide more power and run time. The M18 FUEL Edger is fully compatible with 275+ solutions on the Milwaukee Tools M18 System. Milwaukee offers the M18 FUEL edger's as bare tool only (batteries not included). Full kits are also available with batteries, and charger. Please specify if ordering the bare tool or are interested in ordering the full kit. Product overview and key features: * Bare tool comes with (1) M18 FUEL Edger and (1) 8 in. Edger blade (batteries sold separately) * Kits include all the above items, plus (1) M18 REDLITHIUM FORGE HD12.0 battery pack, and (1) M18 and M12 rapid charger * POWERSTATE brushless motor provides more power and faster edging than 31cc gas * REDLINK PLUS Intelligence enables full-circle communication between the tool and battery, providing you with unmatched levels of performance, protection, and productivity * Lightweight and balanced design reduces fatigue * Reaches full throttle under 1 second boosting productivity and control * 8 in. edger blade with universal 1in. arbor * Steel skid plate protects gearbox from wear * Adjustable wheel to optimize blade depth and tool angle for maximum control * Site Line on guard for more precise edging * Blade wear indicator to monitor blade wear ensure optimal performance * Fully compatible with 275+ Milwaukee M18 Solutions
Not Yet Reviewed
$549.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
