Availability
Showing In Stock Items. Show All 7 Items.
"The cooling is in the copper." Johnson's Radiator Works engine swap radiators feature a 4-row, 2 3/4 in. thick, high-flow copper core, ideal for the best cooling efficiency possible. They are made with heavy-gauge steel side brackets and mounting holes pre-stamped where needed. Antique, vintage, or classic, Johnson's has a radiator guaranteed to cool your vehicle and engine setup. Additional features: * Copper core with one-piece brass tanks * Brass tubes made in-house--125 in. x 0.5 in. * Top tanks stamped from .040 deep draw brass * Quality control start to finish from raw material to finished product * Made with original tooling, equipment, and techniques from Walker * Designed to operate with a 15 to 18 lb. radiator cap (except Flathead application 7 lb. cap recommended) * Brass drain cock
( 2 )
$1,600.00
—
$1,660.00
S&B Filters fuel tanks maximize the space under your diesel truck and empower you to fly by more gas stations like a compact, fuel-efficient car. The folks at S&B know even lifted trucks often sacrifice clearance for larger holds. That's why they design their tanks with a contour around the driveshaft area, helping you maximize clearance. A transfer pump fitting allows you to pull fuel from your now larger tank for equipment—saving valuable space in your truck's bed. Spend less time at the pump and more time driving with the S&B high-capacity replacement fuel tank designed to fit your vehicle. Features, items, and specs: * Brass vent and rollover vent valve * Included baffles cut down on fuel sloshing * Integrated fuel sump for aftermarket fuel pumps * Integrated OEM-style fitting for sending unit installation ease * Front cradle support design (instead of a band that wraps under) to help avoid band debris damage and failure where it's most likely to occur * Front support skid plate on some models * No modifications necessary for installation
( 5 )
$1,549.00
SSBC-USA offers R6-Redline disc brake kits for a variety of applications, including many Ford Mustang models from 2005 and up. These 6-piston, heavy-duty upgrades give your muscle car the stopping power and performance it needs. The front or rear caliper kits are made from high-quality aircraft-grade T6061 billet aluminum and are designed to directly bolt onto your stock axle. R6-Redlines overpower the empty space behind your wheels, improving the overall look and style of either your everyday ride or prized custom build. Kits include lightweight, large bore, direct replacement calipers, dimpled/slotted surface rotors, stainless steel pistons, high performance severe-duty brake pads, all necessary hardware, and full instructions. Standard color options are clear anodized, red, and black. Kit benefits: * Ridiculous stopping power * Up to 28 percent larger pistons over OEM * Eye-popping looks * Significantly upgraded safety * Direct-fit (no brackets required) * Bolts onto stock spindles with existing mounting hardware * Works with factory hydraulics and ABS * Faster braking response times * Fits behind most factory wheels (18 in. or larger) * Fully assembled and easy to install * Simple instructions for bolt-on Installation Kit features: * 2 calipers completely assembled with high-friction, low-dust semi-metallic brake pads * 6 heavy-duty, large bore stainless steel pistons per caliper * 5 bridge bolts per caliper for maximum stiffness * 2 stainless steel pad pins per caliper * 2 stainless steel anti-rattle pad clips per caliper * 4 stainless steel bleeders per caliper * 6 HD square-cut pressure seals and 6 dust seals per caliper (DOT design) * 1 internal crossover O-rings per caliper for responsive flow * 1 banjo bolt and brass block with compression washer per caliper * Rotor Features: -- Efficient directionally designed "slots" to reduce brake fade and reduce glazing -- "Dimple Drilled" to give the look of the traditional "Cross Drilled" design but without the life shortening effects -- Fully vented vane configuration for maximum cooling -- All surfaces are zinc plated to prevent corrosion and rusting
Not Yet Reviewed
$1,663.00
—
$1,796.00
SSBC-USA offers R6-Redline caliper upgrade kits for a variety of applications, including many Ford Mustang models from 2005 and up. These 6-piston, heavy-duty upgrades give your muscle car the stopping power and performance it needs. The lightweight front brake calipers are made from high-quality aircraft-grade T6061 billet aluminum and are designed to directly bolt onto your stock axle. R6-Redlines overpower the empty space behind your wheels, improving the overall look and style of either your everyday ride or prized custom build. The 6-piston calipers are a direct replacement for factory 2/4-piston front calipers. Kits include high performance severe-duty brake pads, all necessary hardware, and full instructions. Standard color options are clear anodized, red, and black. Kit benefits: * Ridiculous stopping power * Up to 28 percent larger pistons over OEM * Eye-popping looks * Significantly upgraded safety * Direct-fit (no brackets required) * Bolts onto stock spindles with existing mounting hardware * Works with factory hydraulics and ABS * Faster braking response times * Fits behind most factory wheels (18 in. or larger) * Fully assembled and easy to install * Simple Instructions for bolt-on Installation Kit features: * 2 calipers completely assembled with high-friction, low-dust semi-metallic brake pads * 6 heavy-duty, large bore stainless steel pistons per caliper * 5 bridge bolts per caliper for maximum stiffness * 2 stainless steel pad pins per caliper * 2 stainless steel anti-rattle pad clips per caliper * 4 stainless steel bleeders per caliper * 6 HD square-cut pressure seals and 6 dust seals per caliper (DOT design) * 1 internal crossover O-rings per caliper for responsive flow * 1 banjo bolt and brass block with compression washer per caliper
Not Yet Reviewed
$1,701.00
—
$1,796.00
The direct-fit train horns by Kleinn will turn heads and move people—big time! The horns are engineered with a flat rack design that allows you to detach the trumpets, and their special XCR2.0 black coating ensures that they will withstand heat, sun, UV, and salt spray. The trumpets come in different sizes, and the Vortex 12 V extreme-flow, heavy-duty brass solenoid valve produces the loudest, largest, and most aggressive train horn sound possible! Heavy-duty steel mounting brackets allow for under-body or rooftop mounting. Trumpets can be separated from the mounting brackets for installation in vehicles that could not otherwise fit full-size train horns. When these horns sound, you'll swear that you're standing on railroad tracks. Too Loud? Too Bad. Available in your choice of dual or triple horn setup. Requires Onboard Air System (not included).
Not Yet Reviewed
$1,599.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
