Availability
Hayden Automotive offers fluid coolers in a variety of sizes and materials. These units help to extend the life of your vehicle by lowering operating temperatures. Coolers are available for many types of fluids, including transmission, hydraulic, and power steering; as well as engine coolant, diesel fluid, and engine and differential oil. Order the universal or vehicle-specific model needed for your application.
( 170 )
$1,054.99
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 16 )
$1,417.99
—
$1,470.99
DeWitts Pro-Series direct-fit aluminum radiators provide a 25 percent increase in cooling performance. They include features like two rows of one-inch wide cooling tubes, press-formed end tanks, serpentine fins, and factory-type upper and lower channels—and they're epoxy-free! Each radiator core is assembled and brazed in a state-of-the-art aluminum brazing furnace. DeWitts Direct Fit is the company's official trademark, and it means your radiator will fit without modifications.
( 166 )
$1,006.99
—
$1,165.99
If your diesel pickup truck has major power, or you consistently tow heavy loads, FTI Performance Diesel BA-3 Series torque converters are for you. With three disks, CNC-ported stators, and 4340 turbine splines, strength and performance are built in. Their billet front covers, furnace-brazed and TIG-welded fins, and heavy-duty sprag modifications combine for impressive units. FTI has tested these converters under extreme conditions, ensuring they'll stand up to your towing, driving, and performance racing needs. BA Series converters provide more torque multiplication, lower transmission temperatures, improved acceleration—and, when you can keep your right foot under control, better fuel mileage! Whether you drive a Cummins, Powerstroke, or Duramax, FTI Performance Diesel BA-3 Series torque converters put the power to the ground.
Not Yet Reviewed
$1,249.00
—
$1,499.00
Hughes Performance XTM Heavy-Duty Towing Series torque converters take away the worry of the "long grade" with the "heavy load." These converters are designed with heavy-duty use in mind, with a heavy-duty one-piece hub and a balloon plate, a heavy-duty sprag, and silicon spot-welded fins in the turbine and cover, providing strength beyond compare. The combination of their stator and specific application fin applies maximum power to your wheels, giving you more available engine power. These XTM converters run 7 qt. of fluid more per minute than your OE or stock converter. Because of the increased cooler flow, the transmission and converter will operate cooler, increasing the life of the tranny and converter.
( 27 )
$1,083.99
—
$1,335.99
DeWitts LSX modified radiator modules are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch. DeWitts LSX modified radiator modules are available with a standard finish, an exclusive black ice epoxy coat for a great OEM look, or polished. Over a hundred models are available (crossflow or downflow) for vehicles from the 1960s and '70s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 17 )
$1,531.99
—
$1,637.99
Wagner Tuning competition intercoolers replace your OEM unit with performance gains and low intake temperatures. Optimized by CAD, most feature lightweight, low restriction tube and fin construction, with a competition high-speed core and cast aluminum end tanks to give these intercoolers excellent cooling properties with less pressure drop. The design was improved further with flow analyses and simulations. Wagner Tuning competition intercoolers deliver an easy fitment and maximized cooling. They are treated with a protective anti-corrosion coating with perfect thermal heat-dissipating characteristics. Order the model designed for your vehicle application.
Not Yet Reviewed
$1,040.00
—
$1,140.00
Efficiency is the name of the game and the COBB Tuning front mount intercooler cores are a winner! They will allow you to get the most out of your stock turbo—and still have plenty left over for future upgrades to go along with it. COBB units are a larger volume, larger core unit that will help reduce intake charge temperatures, especially if you're making more power from the factory. Plus, these intercoolers are a direct drop-in core that arrives ready to install to run with factory intercooler plumbing. If you're looking for an effective solution to eliminate inconsistent power delivery from your turbocharged vehicle, look no further than the all new COBB Tuning front mount intercooler cores! Additional COBB front mount intercooler core features include: * Larger size, front mount intercooler made from high-grade aluminum in choice of black or silver finish * Unique, custom designed fin within the "hot side" endtank helps to evenly disperse incoming air across the entire core * Easiest way to drastically improve power when coupled with tuning from the V3 Accessport * Bar and plate structure * Cast end tanks with the COBB logo * 4-ply black silicone couplers and worm clamps ensure a leak-free connection to the factory charge pipes * No cutting or fabrication required for installation
Not Yet Reviewed
$1,045.00
—
$1,150.00
South Bend Clutch Dyna Max feramic clutch kits are manufactured with full feramic lining on a marcelled fin. The kits offer modified pressure plates for a higher plate load and smooth clutch engagement. South Bend Clutch Dyna Max feramic clutch kits help you to resolve premature disk failure from high horsepower or heavy hauling and they're available with or without a flywheel.
Not Yet Reviewed
$1,218.56
DeWitts Pro-Series direct-fit radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.00 inch cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts Pro-Series direct-fit radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 41 )
$1,001.99
—
$1,589.99
Keep your vehicle running cool with aFe BladeRunner Street Series radiators. These radiators are built from aircraft grade aluminum for superior strength. A larger tube and fin core maintains cooler temperatures over a longer range of time, and the fabricated end tanks are constructed from 1/8 in. aluminum plates for strength and durability. The inlet/outlet uses billet aluminum for long-lasting reliability. aFe BladeRunner Street Series radiators include a brass drain valve and utilize the factory mounting locations for a hassle-free installation.
( 13 )
$1,128.75
DeWitts LS Modified Direct Fit Pro-Series radiators are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Over a hundred models are available (crossflow or downflow) for vehicles from the 1950s, '60s, '70s, and '80s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 4 )
$1,044.99
—
$1,468.99
On Sale
APR intercooler systems result in repeatable performance—even in the most demanding of situations. These massive front-mounted upgrades dramatically reduce intake air temperature (IAT), minimize heat soak, and provide increased performance in easy-to-install, direct bolt-on designs. The superior effectiveness and performance of APR systems is focused around core selection, end tank design, and specific install location for each application. Balancing all the necessary characteristics, APR's engineers perfected units with exceptional cooling and lowered pressure loss across the core, while maintaining critical airflow to components behind the system—delivering maximum performance and far exceeding the capabilities of factory intercoolers. Features may include: * Aluminum construction * Large bar-and-plate design with densely packed staggered and louvered fins * Smooth cast aluminum end tanks engineered for low turbulence/restriction and maximum flow * Pressure tested to prevent power robbing boost leaks * Full directions and APR world-renowned customer support * Some systems may include CNC-bent and TIG-welded mounting brackets, high-quality multi-ply silicone inlet and outlet hoses, T-bolt clamps, and billet MAP sensor housings
Not Yet Reviewed
$1,499.95
$1,199.95
—
$1,499.95
Mishimoto intercooler and pipe kits let your engine breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle just about anything. Mishimoto performance intercoolers offer increased core volume and fin surface area, which results in increased flow, reduced outlet temperatures, and the ability to generate gains in horsepower and torque. Intercoolers are available in black or silver. Pipes are available polished or with a black powdercoat. As with all their products, the Mishimoto intercooler and pipe kits are backed by their signature Mishimoto Lifetime Warranty.
Not Yet Reviewed
$1,030.95
—
$1,600.95
BD Diesel TorqForce is a no-compromise converter for high-performance street and towing applications.They are specifically designed to handle high-torque and high-load situations. TorqForce characteristics offer billet steel covers that do not flex and provide better heat distribution from clutch friction, installed drain plugs for ease of maintenance, new turbine hubs welded in, furnace-brazed fins and stators, and Torrington bearings--not plastic thrust bearings. All this and more gives TorqForce the ability to multiply torque at low engine rpm to get your rig moving plus, provide lock-up clutch holding power during peak demand. Get top towing performance and enhanced street drivability with better fuel economy from BD Diesel TorqForce performance converters.
Not Yet Reviewed
$1,294.95
BD Diesel ProForce torque converters feature exclusive performance cast aluminum stators that improve efficiency and durability for better response in stock to higher horsepower applications. These dual surface torque converters feature a stamp-forged steel front cover with fully remanufactured new bearings, clutch friction and steel. Furnaced brazed pump and turbine, and the upgraded billet steel clutch reaction plate ensures a strong and reliable torque converter for years to come. Replace your tired stock torque converter with the BD Diesel ProForce! ProForce torque converter features: * Ideal replacement for tired stock torque converter * Great for street and towing applications * Dual surface clutch assembly * Machined steel reaction ring replaces flexible factory stamping * Furnace-brazed pump and turbine fins * Fully remanufactured for long service life
Not Yet Reviewed
$1,294.95
—
$1,354.95
Fluidyne high performance radiators feature aluminum end tanks and 100 percent NOCOLOK brazed aluminum cores, rather than the epoxy-bonded types used by others. These cores are built using high-efficiency cooling fins that deliver maximum performance and durability. The radiators are offered in universal sizes, as well as exact fit, with all brackets, fittings, and hoses set up to match the original equipment layout for easy installation—and they meet ISO 9001 standards for quality. Fluidyne radiators are available in crossflow and downflow styles, and a range of sizes for vehicle-specific applications; some models also include a transmission cooler. Keep your ride cool on the hottest days or at the track with a Fluidyne radiator.
( 31 )
$1,095.00
DeWitts HP-Series radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.25 in. cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts HP-Series radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 15 )
$1,144.99
—
$1,632.99
DeWitts direct-fit radiators install in the stock mounting position and use the factory connections without any modifications or adapters. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores contain two rows of cooling tubes, a serpentine fin, and are epoxy-free. These radiators feature press-formed end tanks and are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. They are available with a standard finish or an exclusive black ice epoxy coat for a great OEM look. DeWitts direct-fit radiators can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 5 )
$1,059.99
—
$1,070.99
Don't let high temperatures set you back in the pack! PWR North America lightweight Late Model Dirt and Pavement radiators feature the new 36mm core technology that fits more rows of tubes and fins in the same height, thus allowing for the use of a thinner core, which improves airflow through the core. PWR furnace-brazes their radiators, therefore, these units can withstand greater pressures than the 56mm, 2-row cores in PWR's standard style radiators. These race-proven radiators fit the same footprint as their standard radiators, so installation is simple—no changes to the ductwork, mounts, or plumbing are needed. Wet weight is reduced by as much as 8 lbs. Combined with PWR's pressurized cooling system, you can run higher operating temperatures and smaller duct work openings, resulting in greater control of the water contact in critical areas of the engine. Trust PWR North America for all of your cooling needs.
( 1 )
$1,139.00
—
$1,395.00
DeWitts HP-Series direct-fit aluminum radiators provide maximum cooling for high performance vehicles. They include features like two rows of 1.25 in. wide cooling tubes, press-formed end tanks, serpentine fins, and factory-type upper and lower channels—plus, they're epoxy-free! Each radiator core is assembled and brazed in a state-of-the-art aluminum brazing furnace. DeWitts Direct Fit is the company's official trademark, and it means your radiator will fit without modifications.
( 16 )
$1,017.99
—
$1,218.99
CSF racing radiators feature the most advanced and efficient radiator cores in the industry. Offered for both vehicle-specific and universal applications, they use innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation. Specially engineered tubes in the shape of a "B" are carefully formed and then brazed over the seam. CSF is able to use thinner and lighter aluminum because this design is stronger than normal welded "O" shape tubes. With the inlet in the middle of a seam-brazed tube, the surface area of the tubes is increased approximately 15 percent over regular tubes. With CSF's B-tubes you get dual liquid laminar flow and the efficiency of two smaller tubes vs. one large tube in the same space. High-efficiency, multi-louvered fins are precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in CSF's wind-tunnel lab. CSF offers two all-aluminum end-tank designs to match any style and performance needs. CSF 7000 Series racing radiators have OE-style radial tanks that are flat, rounded, and welded together. Perfect for the customer who likes the sleek and smooth look, and wants to display the intricate welding. CSF deep-drawn end tanks are stamped to the same geometry of OE plastic end tanks. The only high performance manufacture to feature this advanced radiator technology; CSF deep-drawn end tanks feature less welding, and are generally considered the strongest tanks in the industry. Additional features of CSF racing radiators include: * Finished with CSF's Show-Stopper mirror polish process * CAD/CAM designed * Racing-style aluminum drain plug * Brazed in a controlled atmosphere brazing (CAB) furnace—the preferred process for aluminum * ISO 9001/9002 certification * Military-grade (special clad) aluminum used for tubes, fins, and headers * Plates and side brackets meet JIS 3003 specifications * Privately owned factories with full in-house tool rooms * CNC-machined fittings * TIG welded
( 36 )
$1,059.00
AFCO Racing heat exchangers are designed to replace your factory heat exchanger and provide more efficient intake cooling. They are made from aluminum, TIG-welded, and come in a natural finish, and feature enhanced fin technology for greater airflow. These heat exchangers are direct bolt-in applications that require no modifications to facilitate an easy installation.
( 4 )
$1,139.99
PWR North America universal radiators are excellent-quality, general-purpose, versatile units capable of cooling up to 1,000 hp, depending on your application and use. Featuring two rows of 1 in. tubes and a medium fin design, the radiators inlet will accept -20 AN port universal adapter to suit your hose connection. These universal radiators are available in single or double-pass styles, with an open or closed system, and can be used with optional fans. Commonly used in pavement late model, road racing, drag racing, off-road racing, and hot rod installations, these universal radiators from PWR are an ideal choice when high performance cooling is a must!
Not Yet Reviewed
$1,039.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
