Availability
On Sale
RAM Concept 9.5 dual disc clutch/billet flywheel kits are the perfect entry level dual disc clutch systems. Each kit features an increased clamp load pressure plate, 9.5 in. premium-faced organic or metallic clutch discs, and a RAM surface-ground and balanced billet steel flywheel. The pressure plate provides a silky-smooth clutch pedal feel, while the dual disc provides additional holding capacity when compared to single disc systems. RAM Concept 9.5 units also utilize a sprung hub top disc that helps dampen and quiet the initial clutch engagement, plus a strap driven floater plate eliminates any floater plate rattle concerns. They make excellent choices for LS/LT and Coyote engine swaps, as well as Tremec transmission swaps. So, for an outstanding driving experience, choose a RAM Concept 9.5 clutch kit with flywheel designed for your vehicle's needs. Features and benefits: * A higher clamp-load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform--no flimsy stamped steel mounting provisions * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration-free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Available with either: -- 300 Series organic friction material for applications up to about 650 hp -- 900 Series metallic friction material for use up to about 800 hp
Not Yet Reviewed
$1,150.00
—
$1,700.00
$1,035.00
—
$1,530.00
Sikky Manufacturing LSX swap driveshafts are strong one-piece units available in steel or aluminum. They are fitted with high-strength U-joints and are suitable for LS T56 transmissions. Your Sikky driveshafts will come with their Limited Lifetime Warranty and peace of mind.
Not Yet Reviewed
$474.99
—
$1,999.99
Summit Bucks
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 6L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 600 hp * Master overhaul kit with gaskets, seals, rings, and pistons * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity clutch packs using the latest generation friction and steels: -- 3-5 reverse clutch pack -- 1-2-3-4 clutch pack -- 4-5-6 clutch pack -- Low/reverse clutch pack -- 2-6 clutch pack * Updated ACDelco pump cover (stator support) * New ACDelco pump body (bellhousing) * New pump vanes with hardened rings * Billet pump rotor * Billet 4-5-6 clutch hub * Hardened rear planetary assembly * Upgraded line boost valve and slide spring * Performance tuned valve body * New ACDelco transmission control module and solenoid body * Hardened and reinforced clutch hubs
Not Yet Reviewed
$9,745.00
—
$10,245.00
Summit Bucks
GearStar offers GM 6L80E Level 3 transmission models for rear-wheel-drive or four-wheel-drive applications. They feature different advertised horsepower ratings and flash stall ratings. Each master overhaul kit comes complete with new gaskets, seals, rings, and pistons. The transmissions are compatible with engines such as Chevy small block Gen III/IV (LS-based) models from 1997 and up. Transmission details: * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity 3-5 reverse clutch pack using latest generation friction and steels * Expanded capacity 1-2-3-4 clutch pack using latest generation friction and steels * Expanded capacity 4-5-6 clutch pack using latest generation friction and steels * Low / Reverse clutch pack using latest generation friction and steels * 2-6 clutch pack using latest generation friction and steels * Updated AC Delco pump cover (stator support) * New pump vanes with hardened rings * Hardened pump rotor * Upgraded line boost valve and slide spring * Performance tuned valve body with new AC Delco transmission control module and solenoid body * Hardened and reinforced clutch hubs * Billet single disc converter * All transmissions are custom built by one of five master techs from start to finish—and DYNO tested with converter the equivalent of 100 miles to ensure that transmission and converter package are in perfect operating condition before they leave the GearStar facility.
Not Yet Reviewed
$8,745.00
—
$9,245.00
Summit Bucks
GearStar offers GM 6L90E Level 4 transmission models for rear-wheel-drive or four-wheel-drive applications. They feature different advertised horsepower ratings and flash stall ratings. Each master overhaul kit comes complete with new gaskets, seals, rings, and pistons. The transmissions are compatible with engines such as Chevy small block Gen III/IV (LS-based) models from 1997 and up. Transmission details: * New wide inlet filter * New bearing kit * New bushing kit * Expanded capacity 3-5 reverse clutch pack using latest generation friction and steels * Expanded capacity 1-2-3-4 clutch pack using latest generation friction and steels * Expanded capacity 4-5-6 clutch pack using latest generation friction and steels * Low / Reverse clutch pack using latest generation friction and steels * 2-6 clutch pack using latest generation friction and steels * Updated AC Delco pump cover (stator support) * New AC Delco pump body (bellhousing) * New pump vanes with hardened rings * Billet pump rotor * Billet 4-5-6 clutch hub * Hardened rear planetary assembly * Upgraded line boost valve and slide spring * Performance tuned valve body with new AC Delco transmission control module and solenoid body * Hardened and reinforced clutch hubs * 258mm billet triple disc converter * All transmissions are custom-built by one of five master techs from start to finish—and DYNO tested with converter the equivalent of 100 miles to ensure that the transmission and converter package are in perfect operating condition before they leave the GearStar facility.
Not Yet Reviewed
$9,945.00
—
$10,445.00
Summit Bucks
GearStar GM 6L90E Level 3 transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance and durability but longevity as well. These units come programmed with a VIN number that will work with most aftermarket transmission controllers. If this is going into a stock application, GearStar has the ability to program the transmission with your VIN number to ensure it's a direct replacement. The next upgrades for this transmission are expanded capacity performance clutch packs. Level 3 transmissions come with all new electrics, including the wiring harness, internal computer, all sensors and solenoids—along with all new bushings, bearings, and seals. To help with durability and performance, the transmissions come with a billet pump rotor, billet 4-5-6 clutch hub, hardened and reinforced clutch hubs, and a hardened rear planetary gear assembly. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the transmission, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$8,945.00
—
$9,445.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
