Availability
BendPak LR-4A low rise lift arms are optional components increases your lifts capabilities, extending the pad reach of each ramp. Attaching easily to the low-rise lift ramp, the arms help you reach contact points that might be closer together on your frame. With an easy-slide design, the low-profile LR-4A arm kits move along the ramp rail giving you the power to position the lifting arm anywhere under your vehicle. BendPak kits include arms with polyurethane rubber blocks that are designed to grip the frame of your vehicle, holding it firmly in place, and will withstand heavy use. Safely increase the pad width of your scissor-lift ramps with BendPak LR-4A arm kits.
( 1 )
$1,050.00
Increase the capability of your P9000 Series low-rise pit lifts with BendPak 6000AK low-rise lift arm kits. These 9,000 lb. capacity adapters instantly extend the reach of your lift's runways. The kits attach easily to each lift ramp so you can reach challenging contact points on your frame. With telescoping arms, each lifting arm can be extended up to 18 in. past the edge of the platform, extending to a full 41.5 in. length. They feature a rotating pin design that makes for quick installation and rotates smoothly, giving you the power to position the lifting arm anywhere under your vehicle. Note: If you extend the lift arms (using their telescoping ability) past 4 ins. from the edge of the platform, the rated capacity of the lift arms is reduced. Rates: * Up to 4 ins. -- 2,250 lbs. per lift arm -- 9,000 lbs. total -- No reduction in rated capacity * At 6 ins. -- 1,500 lbs. per lift arm -- 6,000 lbs. total * At 10 ins. -- 900 lbs. per lift arm -- 3,600 lbs. total * At 18 ins. (fully extended) -- 500 lbs. per lift arm -- 2,000 lbs. total
Not Yet Reviewed
$975.00
BendPak LR-60P low-rise portable lifts are just the right size to be moved around the shop to lift and raise vehicles. When you need to add versatility and productivity to your shop or garage, your first stop should always be a BendPak vehicle lift. Simple, safe and rugged; this rubber-topped low rise BendPak lift can handle a mighty 6,000 lbs. load without hogging your precious floor space. These lifts are ideal for quick service on today's passenger cars and light trucks. With wide rubber pads, wheel service and auto-body repair can now be performed on a surprisingly large variety of vehicles. Additional features include the following: * 6,000 lb. lifting capacity * Electric/hydraulic power system * Multi-position safety locks * Rubber lifting blocks included * Dropped cross bar for added clearance * Heavy-duty steel channel frame * 110-220 VAC motor * 35-second lifting time
( 3 )
$3,595.00
When you need to add versatility and productivity to your shop or garage, your first stop should always be a BendPak vehicle lift. Simple, safe and rugged, this rubber-topped low-rise BendPak lift can handle a mighty 6,000 lbs. load without hogging your precious floor space. The BendPak LR-60 lift is the ideal solution for quick service on today's passenger cars and light trucks. With wide rubber pads, wheel service and auto-body repair can now be performed on a surprisingly large variety of vehicles. All in all, the LR-60 is perfect for servicing cars and light trucks. For even more adaptable versatility, the included solid rubber lift blocks can be positioned in a variety of pick-up points on unibody and frame-contact undercarriages. Additional features include the following: * Electric / hydraulic power system * Multi-position safety locks * Rubber lifting blocks included * Dropped cross bar for added clearance • Heavy-duty steel channel frame
( 1 )
$3,495.00
BendPak P-900LT low-mid-rise lifts are heavy-duty. With increased lift capacity of 30 percent over past models, they maintain all the features you love—like the dual-approach design, open-center access, and a hands-free safety check. This is the industry's ultimate pit lift, perfect for quick-lube shops, full auto centers, and home garages. The P-900LT offers a minimal footprint and full access to the wheels and undercarriage. Ramps detach quickly to convert a flush-mount unit to a floor unit. Additional facts and specs: * 9,000 lb. capacity * Mounts outside the pit rail without interfering with center work area * Heavy-duty 1.5 hp electric-hydraulic power unit * Electronic push-button controls allow smooth, single-hand operation * Automatic multi-position safety locks with air release deliver safe, remote operation * Durable rubber-topped pad surface and rubber lift blocks provide quick setup
Not Yet Reviewed
$6,995.00
On Sale
BendPak LR-1000 low-rise lifts are your solution for quick maintenance and increased productivity when servicing today's passenger cars and light trucks. From tire and brake service … to vehicle detailing and body repair, these lifts will facilitate your work on a wide variety of vehicles. Additional facts and specs: * Low-profile height that accommodates most vehicles, including sports cars, race cars, and larger trucks and SUVs * Single-point safety release make this lift easy to operate and very safe to use * Dropped crossbar in the center provides added vehicle drive-over clearance. Suspension work, oil changes, wheel and brake service, and detailing are easier than ever * Industrial-grade hydraulic cylinder * Solid rubber lift blocks
Not Yet Reviewed
$5,495.00
$5,195.00
BendPak steel approach ramps make it easier to get your low-profile car on to the lift without risk of damage. Their ramps offer heavy-duty construction, extended lengths, a low-rise design, a textured surface for better tire grip, and extra width to support big wheels and vehicles. BendPak ramps include brackets and necessary hardware to set them up. Choose a pair of ramps designed for your BendPak lift.
( 1 )
$1,550.00
—
$4,295.00
BendPak HDSO-14P 4-post open front car lifts allow easy entry and exit beneath a vehicle. They're available with optional drive-thru ramps, drip trays, and rolling jacks. These lifts feature clear entry upfront, providing convenient vehicle access. The lifting capacity and extended runways allow you to service a wide variety of vehicles, ranging from small cars to full-size trucks. Additional facts and specs: * 14,000 lb. lifting capacity * CE approved and certified * Huge cable sheaves reduce wear and tear * Longer approach ramps for low ground clearance vehicles * Electric/hydraulic power system * Runways adjust for different tread widths * Automatic leveling system with multiple auto-leveling locking positions * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Multi-position safety locks in each column * Includes fully adjustable lock stops for precise leveling
Not Yet Reviewed
$10,995.00
On Sale
BendPak introduces a game-changing solution for auto repair shops seeking flexibility in installation—the 10AP-168 Series 2-post lifts! As the automotive landscape evolves with advanced technology, it's crucial for auto repair shops to keep pace by equipping themselves with the latest tools and technology. Enter BendPak's revolutionary AP series of two-post lifts, marking a new era in car lift engineering. These lifts are meticulously designed to integrate the best features from existing two-post lift types into an entirely novel concept, catering to extreme use, heavy loads, and operator safety and efficiency. The 10AP-168 delivers everything professionals love about the AP Series in a taller package. Unlike the standard 10AP, this lift offers an enhanced overall height of 168 in., giving taller techs the room, they need to work more effectively. Additional product features and specs: * Premium-grade materials, a cutting-edge design, as well as a 10,000 lb. lifting capacity * Boasting an expandable top beam and innovative BI-METRIC arms, this lift can accommodate virtually any vehicle lifting requirement, whether it's symmetric or asymmetric * Intelligent lift design strikes a balance between simplicity and sophistication, resulting in minimal service and maintenance costs, leading to reduced operating expenses and heightened productivity * Evolutionary Automatic Swing Arm Restraint System (ASARS) stands strong against the forces exerted when vehicles unexpectedly shift during loading or service * Innovative and patented triple-telescoping swing arms redefine lifting precision—unique three-stage design, complete with a patented nesting feature, enables greater retraction and extension (inner sliding arm movement reaches new levels without any hindrance, allowing for precise lifting action with increased efficiency) * Exclusive Low-Pro swing arms are engineered for ultimate versatility—with telescoping channels and a dropped-end pad receiver, these arms excel in servicing lowered chassis-height vehicles to provide easy access to challenging lift points while minimizing the risk of damage to vehicle side skirts, running boards, and ground effects * Height stackable adapters and two-stage spin-up screw pads offers superior vertical pad placement for secure vehicle support—customizable precision with screw pads and adapters achieve impeccable lifting alignment with double-telescoping screw adapters featuring polyurethane pads resistant to gouges and tears * Adaptability of pads ensures level lifting across all conditions—optional 2.5 in. and 5 in. stackable adapters enhance vertical pad placement for precise and secure vehicle support—with a seamless drop-in design, quick and efficient usage is guaranteed, complemented by organized and secure storage on column-mounted racks * BendPak's patented automatic safety lock system is designed for seamless engagement during lift rising and effortless release during descent—this system streamlines operator actions, enhancing overall safety and workflow
Not Yet Reviewed
$6,595.00
$6,220.00
On Sale
The BendPak 10APX-181 Series 2-post lifts offer exceptional direct-drive lifting performance with the convenience of wide or narrow installation, wrapped up into one configurable package. These 2-post lifts are engineered to cater to mechanics who spend their days in challenging positions. Say goodbye to discomfort and hello to a premium workspace that accommodates technicians with the best equipment for the job—especially for those tackling larger vehicles. True to the 10AP Series, these lifts feature a robust 10,000-lb. lifting capacity, an expandable top beam, and BI-METRIC arms to suit virtually every vehicle lifting requirement—symmetric or asymmetric. The simple, yet highly sophisticated design of the 10APX-181 Series lifts keep service and maintenance costs to a minimum, delivering lower operating expenses and higher productivity. Equip your shop with the latest in lifting technology from BendPak—and experience the difference firsthand. Key features and specs: * High tensile-strength steels, low-profile arms, and meticulously designed swing arms reflect BendPak' commitment to safety-critical enhancements, empowering technicians to tackle heavier EVs with confidence * Lifts are not only sturdy and secure but also equipped with BendPak's advanced BI-METRIC arms, capable of seamlessly performing symmetric and asymmetric lifting * Uniquely designed BI-METRIC adaptable swing arms offer exceptional flexibility to empower users to configure their lifts symmetrically or asymmetrically, without the need for arm switching—2-in-1 design accelerates vehicle servicing, enabling techs to work more efficiently * Revolutionary Automatic Swing Arm Restraint System (ASARS), engineered to endure the elevated forces exerted during vehicle service—this patented system, constructed with heavily forged steel, locks lift arms securely in place with an impressive load-holding force of over 2000 lbs. * BendPak's patented triple-telescoping swing arms redefine precision lifting offers greater retraction and extension capabilities—patented nesting feature enables seamless inner sliding arm movement, eliminating hindrances and ensuring maximum efficiency in vehicle lifting * Exclusive Low-Pro swing arms redefine versatility, featuring telescoping channels with a shorter profile and dropped-end pad receivers (arms are engineered for optimal under-car access on lowered chassis-height vehicles to minimize the risk of damage to vehicle skirts, running boards, and ground effects) * Stackable adapters and spin-up screw pads provide secure vertical pad placement * Experience flawless lifting alignment with optional double-telescoping screw adapters, fortified with resilient polyurethane pads—these adapters ensure level lifting in all conditions, enhancing technician safety * Optional 2.5 in. and 5 in. stackable adapters further optimize vertical pad placement for secure vehicle support * Patented automatic safety lock system redefines safety and efficiency—designed for automatic engagement during lift rising operations, this system also boasts an ergonomic single-point release for effortless lock disengagement during lift descent
Not Yet Reviewed
$7,495.00
$7,095.00
The BendPak MDS-6EXT mid-rise open-center car lifts are the ideal solution for quick-lube stations looking to install a car lift flush over their work pits. You haven't experienced state-of-the-art portable lifting convenience until you've used a BendPak MDS-6EXT mid-rise scissor lift. This family of 6,000-lb. capacity mid-rise lifts comes loaded with adjustable arm assemblies, safety lock bars with multiple lock positions. The next generation of electric vehicles has arrived, and it didn't go unnoticed by BendPak that the lifting points of these vehicles are very different. Using long-wheelbase vehicles, which includes some very popular electric cars, as BendPak's point of reference, they designed the MDS-6EXT mid-rise open-center car lift to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. If your shop wants to be ready for longer-wheelbase vehicles, no matter how low the suspension, you can't do better than this BendPak model. Specifications for the BendPak MDS-6EXT mid-rise open-center car lifts: * Each lift platform features four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class * Powdercoat finish provides a long-lasting durable finish * Comes standard with four durable cushioned and rubber contact blocks, permitting fast vehicle setup * Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue * Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 pound lifting capacity * Solid steel safety lock bars engage automatically during ascent * Convenient stainless steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button (requires min. 50 psi, 10 cfm air source at time of installation) * A push-button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles * Hinge point features Zerk grease fitting to allow lubrication at critical wear areas
Not Yet Reviewed
$8,295.00
Meet the BendPak Autostacker PL-6SRX, an extra-wide parking lift version of the world's best fully collapsible parking lift. They are the ideal home car lift for tight spaces and garages and also allow homeowners to maintain a clean, modern, and sophisticated look to their garages. Like BendPak's standard-width parking lift model, this extra-wide edition offers a safe, easy way to store two vehicles in a single parking space. Additionally, the PL-6SRX lifts offer a more spacious environment for vehicle loading on the top-level platform. Lower-level vehicles will pull into an equally roomy parking space that is protected by Autostacker's scissor superstructures. Many people who are car collectors are not mechanics, so home parking lifts need to be easy to use. With BendPak's Autostacker PL-6SRX, there are no cables to replace or maintain, and that means zero scheduled maintenance issues, which is a money saver. Key features and specs: * 6,000 lb. lifting capacity * Extra-wide construction for increased door clearance * Key-switch disconnect fully disables operation for enhanced security * Audible alarm and warning buzzer alerts operator and bystanders when the lift is in operation * Accommodates cars, light trucks, and SUVs * Rugged, welded-steel construction is strong and durable * 100 percent hot-dipped, galvanized steel platform * Attractive slate gray, baked-on powder coat finish provides added toughness * Front wheel dish acts as a wheel chock to prevent vehicles from rolling forward or backward * Extra-wide, gradual sloping platform reduces entry ramp height * Automatic safety locks engage at five different parking heights * Simple push-button controls * Dual, direct-drive hydraulic lifting cylinders * Dependable hydraulic circuit that provides precise, equalized lifting * Variable height parking accommodates a wide range of vehicle and ceiling heights * Contoured scissor legs provide rigidity, decreased deflection, and a low collapsed height * Full-width, straight-through axles increase overall stability and tracking through the vertical travel range * Full-width pivot pins promote straighter tracking of the scissor legs throughout travel—vital for eccentric loads * Extra-wide, heavy-duty steel scissor arms with cross member bracing enhance stability * Unique clevis-design scissor ends lower stress and increase rigidity by distributing loads symmetrically over the pins * Patented asymmetric scissor arms provide greater underside door clearance * Patented door-sentry car door protectors are made from energy-absorbing rubber to protect against accidental scratches or door dings * Space-saving design is perfect for commercial or residential applications * Hydraulic safety valves (velocity fuses) prevent sudden, unexpected platform collapse in the unlikely event of hydraulic system failure * UL Listed: electrical components meet National Electrical Code (NEC) requirements
Not Yet Reviewed
$14,195.00
BendPak Elite air compressors are high-quality air compressors that deliver proven longevity in the most demanding conditions. Because they run at a slower rpm than most comparable units, they are quieter, run cooler, and cost less to operate. The 100 percent cast iron pumps provide the quality and performance needed for heavy-use applications, like automotive and body repair to manufacturing and industrial service. The 2-stage, twin piston pumps feature splash lubrication for total reliability and a finned cylinder configuration that provides 360 degree cooling. The compressors' heavy-duty, disc-type valves are dependable and accessible without having to remove the cylinder head or perform other complicated valve maintenance procedures. A built-in intercooler and an air-cooled aftercooler chills the air resulting in reduced heat and condensation moisture. BendPak Elite Air Compressors feature: * Extra-quiet low RPM pumps * Cast-iron pump and heads * Splash lubrication * Dual belt drive for less load on bearings * Fully enclosed belt guard * ASME rated tank * Large surface area, cooling fins, and forced-air aftercooler * Oversized ductile iron crankshaft * Tapered roller main bearings * Precision balanced flywheel * Magnetic starter * Cast iron oil reservoir with large oil drain and sight gauge glass
Not Yet Reviewed
$4,395.00
The BendPak PL-6000DC is an add-on shared column and platform two-post parking lift specifically designed to accommodate the needs of real estate developers, architects, engineers, automotive dealers, and commercial parking operators. They can be ganged together with shared columns allowing you to fit more units into a smaller space. The PL-6000DC dual-column parking lift can accommodate a wide array of vehicles including SUVs, sedans, and sports cars and offers the perfect combination for both long-term and short-term parking. Typically, long-term parking is the upper level and short-term parking below. They can be installed inside a typical 8-foot parking space to accommodate most cars and light trucks and operate in both indoor and outdoor locations. Product specs and advantages: * Low operating cost—platform driven by gravity when lowered, no electric motor consumption is required * Designed for installation on typical parking surfaces—detailed installation manual is provided along with floorplan and foundation drawings and video attached with products will help customers have easier installation work * Ganged column design allows multiple installations in minimum space * Commercial grade design and construction—add-on column for PL-6000DC lifts; lifting capacity: 6,000 lbs. (2,722 kg) * Galvanized and corrugated anti-slip platform * Freestanding design when ganged two or wide * Overhead power unit provides smooth quiet hydraulic operation * Platform can be stopped at different heights to fit various vehicles and ceiling heights * Full-width channel-locked center panels protect lower vehicle * Wide deck platform accommodates pickups, vans, and cars * Dual direct-drive hydraulic cylinders * Automatic safety lock combined with anti-fall device to hold platform securely * Virtually maintenance-free composite carriage bearings * Electric key switch for security and safety * Automatic shut-off when operator releases key switch * Manual lock release available in case electricity failure (optional) * Hydraulic overloading protection * Photocell sensor prohibits lift to be lowered if vehicle is parked below Safety features: * Mechanical safety locks are spaced every 4 inches * 24 V operator controls and lock release * Photocell sensor prohibits lift to be lowered if vehicle is parked below * Electric protection for power overload or improper voltage * Automatic locking system during power outage * Emergency stop button * Upper limit switch * Pressure relief valve and pressure compensated flow control valve to ensure safe operation and level lifting * Industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups, and wear bands to virtually eliminate fluid bypass Important Note: BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). The buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
Not Yet Reviewed
$9,395.00
The space-saving designs of the 9,000 lb. capacity HD-9STX lifts are ideal for vehicle storage in residential garages or commercial buildings. These lifts also happen to make great service lifts for smaller shops who still want to do a big business. BendPak manufactures these lifts using high-quality materials, ensuring years of trouble-free performance. Additional features include the following: * 9,000 lb. maximum lifting capacity * Freestanding design * Narrow width * High-rise * Perfect for parking, storage, and service * Runways accommodate narrow and standard vehicles * Runways include rail-kit for optional accessories * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Runways feature non-skid surface * Push-button pneumatic safety release * Independent backup slack-cable safety latches * Customizable power unit location * Removable approach ramps for additional drive-under clearance * Longer approach ramps for low ground clearance vehicles
Not Yet Reviewed
$6,295.00
On Sale
BendPak 10APX Pro Series 2-post lifts are designed for mechanics who constantly deal with working in uncomfortable positions on the job. They offer a lifting height of 79.5 in. and an overhead beam of 157 in., providing ample room to work comfortably with top-tier equipment. Like the rest of the Pro Series, these powerful units feature a 10,000 lb. lifting capacity, Low-Pro arms, Bi-Metric arms, and more. Pro Series two-post lifts boast a revolutionary design that combines the finest qualities of today's lifts into a new car lift engineering concept. The result is a lift unlike any other, purposefully designed for extreme use, high loads, and unmatched operator safety and efficiency. * Experience the ultimate convenience with the Pro Series, offering both wide and narrow installation options in one customizable package. * Built to last, these versatile lifts ensure durability, safety, and reliability for all your automotive needs. * Improved under-car access thanks to the low-profile arms and extra-wide column spacing. Critical load-holding components are crafted from high tensile-strength steels, allowing greater telescoping movement in swing arms and tube profiles tailored for low ground clearance vehicles and outer-positioned EV lifting points. * Electric vehicles require specialized lifts to safely manage their increased weight from added batteries, reinforced frameworks, suspension systems, and protective metal armor. The Pro Series is designed to meet these demands with reinforced construction and purposefully engineered features, making it the perfect solution for EV service. * The Pro Series boasts a revolutionary Automatic Swing Arm Restraint System (ASARS), designed specifically for heavy vehicle service, setting a new standard in the industry. Engineered to withstand the rigorous pushing and pulling forces encountered during servicing, this system features a complete 360-degree load-holding grip. Its heavily forged-steel design delivers over 2,000 pounds of load-holding force, ensuring secure arm placement and preventing unintended movement during lift use and vehicle servicing. * The Pro Series also introduces revolutionary and patented swing arms tailored for accommodating a wide variety of vehicle lifting points. Unlike traditional lift arms, Pro Series arms retract shorter and extend farther, providing lift operators with extensive positioning options. * BendPak's exclusive Low-Pro swing arms incorporate telescoping channels with a lowered profile and dropped-end pad receivers. This design facilitates easier access to lift points on lowered chassis-height vehicles, reducing the risk of damage to vehicle side skirts, running boards, or ground effects. * The Bi-Metric adaptable swing arms are another exclusive feature, allowing users to load vehicles symmetrically or asymmetrically without needing to switch arms. * When it comes to lifting full-sized trucks or SUVs onto a two-post lift, you can't cut corners. Reduce your risks with BendPak's Frame Cradle Pads, ensuring your vehicle stays securely in place during every lift operation. The heavy-duty steel and thick polyurethane rubber pad lining provide durability and protection. * For even more functionality, you'll love the BendPak WSA-100 Work Station. This industrial-grade utility station integrates air and electric capabilities into your two-post or four-post lift seamlessly, boosting the efficiency of your shop—with four electrical outlets and two specialized air service outlets, one for lubricating air for tire inflation and another for clean air for pneumatic tools.
Not Yet Reviewed
$7,845.00
$7,445.00
Go easy on your back when you use BendPak aluminum approach ramp kits in conjunction with BendPak HD-7 and the BendPak HD-9 Series lifts. They come complete with a pair of low-profile aluminum ramps, the quick-mount brackets, and all of the necessary hardware to make ramp removal and installation a cinch. These lightweight ramps have an attractive diamond plate finish to provide a non-slip surface.
( 14 )
$975.00
—
$1,550.00
BendPak's Deluxe alignment lift turnplates make their alignment lifts beefier and more accurate than ever. They are larger, sturdier, and feature more underside rollers than their previous design, making them a great reason to choose BendPak for all wheel aligning needs. BendPak Deluxe turnplates feature a robust, industrial-grade design of aluminum alloy and stainless steel construction with heavy-duty encapsulated Delrin® bearings for increased support and smoother movement. They include two hardened rubber "popsicle stick" rollback bridges that eliminate the gap between the turn plates and lift runways for a smooth transition during rollback procedures or when loading and unloading vehicles. Additional features: * Stable tri-channel ball retainers provide better performance, minimize service, and maintenance * Free-floating 360 degree movement in all directions * 2 in. movement in any direction from center point * Oversized 14 in. diameter gauge accommodates all wheel types * Synthetic polymer underside slider allows easy movement of turn plates along runway surfaces * Auto-centering design * Built-in handles for easy transport * Greaseless operation--no maintenance or mess * Low-profile design * Dual angled locking pins * Powdercoated for extended lifespan
( 1 )
$1,425.00
BendPak GP-7 GrandPrix 2-post lifts deliver full height, efficiency, and safety in a robust slim profile. It all starts with the design. Super-slim columns are capable of lifting up to 7,000 lbs. with incredible ease. In fact, vehicles will reach a max lifting height of 78 in. twice as fast as other lifts thanks to a hydraulic cylinder that runs through the overhead crossbar, acting in tandem with dual aircraft lifting cables to provide lifting force from two sources. For every inch of cylinder extension, the lift carriage rises 2 in. With its small footprint, optimal lifting height, speedy lifting times, and incredible safety features to guarantee your protection, the GP-7 is a clear-cut revolution in engineering. Key features: * 7,000 lb. lifting capacity * Telescoping Low-Pro arms for sports cars * Bi-metric asymmetric and symmetric arm configuration * Lowered arm tube supports * Automatic arm restraints * Single release-point operation * Taller lift carriages * Automatic safety locks * Single hidden hydraulic cylinder * Four aircraft-quality lifting cables * Redundant safety cables for peace of mind * Multiple lock positions
( 1 )
$6,594.99
Using long-wheelbase vehicles as BendPak's point of reference, they designed the MDS-6EXT mid-rise open-center car lifts to accommodate longer lifting points that better reach the extreme edges of the vehicle underbody. Along with the flush-mount MDS-6EXTF, these two extended mid-rise lift models maintain their open-center design, just like their standard length MDS-6LP and MDS-6LPF models. The MDS-6EXTF extended-length, flush-mount, mid-rise lifts provide quick-lube stations looking to install a car lift flush over work pits. If your shop wants to be ready for longer-wheelbase vehicles and minimize the lift's footprint, you can't do better than BendPak's MDS-6EXTF mid-rise open-center car lift. Key features: * 6,000-lb. lifting capacity * Open-center design/flush-mount * Adjustable arm assemblies * Solid-steel safety lock bars * Multiple lock positions * Hinge-point with Zerk grease fittings * Low-profile design * Rubber blocks included * Removable ramps
Not Yet Reviewed
$8,195.00
The powerful BendPak RBK18000 rolling bridge jacks are made for use with your HD-35 4-post series lift. Sometimes a vehicle's center of gravity isn't in the exact middle of the vehicle. While the 18,000-lb. capacity RBJ18000 jack is capable of handling the weight of many heavy-duty vehicles, some larger trucks, buses, and commercial drivers have significantly offset centers of gravity. Therefore, it's extremely important to ensure your bridge jack is rated for the entire weight of both the front and back axles of the vehicle. The extra lift capacity of this RBJ18000 rolling bridge jack will compensate for a shifted center of gravity in heavy-duty vehicles being raised on the HDS-35 or HDS-40 four-post lift Series. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axle and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. The power unit on the RBJ18000 is strong enough to lift those massive city buses and farm equipment you're raising on your HD-35 four-post lift. A simple foot pedal controls the jack, which reaches its max extension in seconds flat. Additional product features: * 18,000-lb. lifting capacity * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Different factors change your working height: operator preference, operator height, vehicle clearance, ceiling height and more, with three lock level positions on the jack, your ultimate working height is much more versatile * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$6,395.00
On Sale
The BendPak RBJ15000 rolling bridge jacks are made for the HDS-35 four-post lift—which is a heavy-duty machine meant for professional shops that deal with massive, specialty equipment. If you have a truck lift, you have easy access to the undercarriage but can't get to the wheels. BendPak rolling bridge jacks open the door to new service opportunities, such as wheel balancer, wheel alignment and tire changer equipment. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axle and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. The power unit to this jack is completely pneumatic-hydraulic. A small airline is attached to the bridge jack and is controlled with an ergonomically designed foot pedal. Two bridges jacks can share a single airline with the addition of BendPak's exclusive, optional airline kit. The work you do varies, so if all you need is to lift the wheels a few inches, just enough to remove them, BendPak makes it easy! Additional product features: * 15,000-lb. lifting capacity for full wheel service capability * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Three safety-lock positions—raise your jack to three different heights—whatever is most comfortable for you! * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$5,695.00
$5,245.00
On Sale
BendPak's RBJ25000 rolling bridge jacks offer 25,000 lbs. of muscle meant to service some of the biggest commercial fleets on earth. This jack can be used on your HDS40 four-post truck lift to perform wheel service on almost any heavy-duty vehicle on wheels. The RBJ25000 rolling bridge jacks are over-engineered to handle offset centers of gravity on extremely heavy vehicles. Who might need bridge jacks of this caliber? For one, heavy-duty trucks and buses tend to require a bridge jack rated for more than half of the overall vehicle weight. Generally speaking, if you can safely lift a vehicle with the HDS-40 four-post lift, you can safely perform wheel service with the RBJ-25000 rolling bridge jack. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axel and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. Additional product features: * 25,000-lb. lifting capacity for full wheel service capability * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Lift to three lock positions for your convenience—the higher the jack, the more undercarriage clearance you get on your HDS-40 four-post lift * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$6,395.00
$5,745.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
