Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
391 Results Found For "bearings"
Showing In Stock Items. Show All 556 Items.
Clevite H-Series Rod Bearings
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 168 )
$9.50
—
$9.99
Sealed Power CP-Series Rod Bearings
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 118 )
$5.99
—
$9.99
Clevite P-Series Rod Bearings
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 289 )
$6.99
—
$9.99
SKF Bearings Differential Carrier Bearing Races
SKF Bearings differential carrier bearing races are available for a wide range of applications and meet or exceed requirements for most applications. They incorporate logarithmic roller raceway profiles with an ultra-smooth surface finish for efficient and quiet operation. SKF products are designed and manufactured to the highest quality standards, ensuring long life and safety. For more than 100 years, the world's engineers, technicians, and mechanics have turned to SKF Bearings for the best possible solutions, shouldn't you?
Not Yet Reviewed
$9.99
Sealed Power A-Series Rod Bearings
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 33 )
$5.99
—
$9.99
SKF Bearings Wheel Seals
SKF Bearing wheel seals offer consistent, leak-proof performance. They are manufactured from quality materials to provide you with a long service life. Most of these wheel bearing seals are chemical- and abrasion-resistant, keeping fluids in and debris out. With fitment for thousands of applications, choose the seal that is right for your vehicle.
( 2 )
$3.99
—
$9.99
National Bearing Wheel Bearings
These National Bearing wheel bearings are designed for use with your OEM or aftermarket brake rotors. Their steel roller bearing configuration allows for maximum performance without sacrificing durability.
( 24 )
$8.99
—
$9.99
SKF Bearings Adapter Bearings
SKF Bearings adapter bearings and housings answer the requirements of the agricultural industry's demanding conditions, such as extreme temperatures, changing loads, increased capacities, and corrosive environments. With a variety of standard and custom bearing designs, SKF offers a complete line of adapter bearings with proven seal designs, from low torque shields to heavy-duty triple lip seals. They also offer low maintenance and better sealing conditions in contaminated environments. SKF adapter bearings are designed and manufactured to the highest quality standards, ensuring long life and safety. Lock in lubricant and seal out dust, dirt, and contaminants for better equipment performance with SKF. Select the adapter bearings needed for your application.
( 1 )
$8.99
King Thrust Washer Bearings
King Engine Bearings offers thrust washers for a variety of performance and OE applications to suit your specific engine needs. An engine with subpar components would only lead to costly repairs, loss of revenue, and potential road safety concerns. From repairs to full engine rebuilds, choose only superior-quality parts from a trusted source—King Engine Bearings.
( 1 )
$3.99
—
$5.99
King CA-Series Rod Bearings
Need bearings? See the specialists at King. Their CA-Series rod bearings are a bi-metal silicon aluminum material offering high fatigue strength and a superior temperature threshold. When it comes to bearings, there is only one King Engine Bearings.
( 4 )
$7.99
—
$8.99
SKF Bearings Wheel Bearings
SKF wheel bearings are engineered and manufactured to the highest quality standards using only premium-grade steel for outstanding durability and performance. Their superior seal design helps to keep out dirt and contaminants, and retains lubrication in the bearing. These wheel bearings are also able to boost reliability under heavy loads and misaligned conditions, which makes them an ideal solution for many wheel end applications. SKF Bearings wheel bearing features and benefits include: * Reduces friction and increases load-carrying capabilities * Application specific per year/make/model of vehicle
( 6 )
$8.99
SKF Bearings Tapered Bearing Cups
SKF Bearings tapered bearing cups are available for a wide range of applications, and they meet or exceed requirements for most applications. They have an ultra-smooth surface finish for efficient and quiet operation. The cups are designed and manufactured to the highest quality standards, ensuring long life and safety. For more than 100 years, the world's engineers, technicians, and mechanics have turned to SKF for the best possible solutions, shouldn't you?
Not Yet Reviewed
$7.99
FAG USA Pilot Bearings
FAG USA pilot bearings offer high-quality for your project. They are produced worldwide for a wide range of applications to keep the input shaft centered and drivetrain vibrations down. Choose the one you need for your vehicle.
Not Yet Reviewed
$2.99
—
$5.99
FAG USA Wheel Bearings
FAG USA wheel bearings are compact bearing units, manufactured with a defined, preset bearing clearance. The results are rugged design, as well as for-life (no maintenance) lubrication and sealing. They feature angular contact ball bearings for both front and rear wheels, ensuring optimum performance in the most demanding situations. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearings—available for hundreds of applications.
( 4 )
$4.50
—
$9.50
SKF Bearings Needle Bearings
SKF needle roller bearings are bearings with cylindrical rollers that are small in diameter. In spite of their low cross section, needle roller bearings have a high load carrying capacity—and are, therefore, extremely suitable for bearing arrangements where radial space is limited. SKF supplies needle roller bearings in different designs and in a wide range of sizes, which are appropriate for countless applications.
Not Yet Reviewed
$9.99
National Bearing Wheel Seals
Seal in fluids and seal out dirt with National wheel seals. Featuring their proprietary RediCoat sealant, these wheel seals provide a proper seal regardless of surface imperfections. Go with an aftermarket solution you can trust on your vehicle--National wheel seals.
( 8 )
$3.99
—
$7.99
Clearance
ACL Direct Replacement Main Bearing Sets
ACL direct replacement main bearing sets include their Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. ACL Aluglide bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds. Affordable, high-quality engine bearings expertly made from premium materials and engineered to match your exact requirements, ACL main bearing sets. Select the set designed for your engine.
( 1 )
$13.99
—
$18.99
$6.50
—
$8.50
Clearance
ACL Direct Replacement Rod Bearing Sets
ACL direct replacement rod bearing sets are affordable, high-quality bearings expertly made from premium materials and engineered to match your exact requirements. They are offered in the Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. Select the set desired for your build. ACL Aluglide bi-metal bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds.
( 1 )
$18.99
$4.50
—
$9.99
Timken Manual Transmission Bearings
Timken Bearing manual transmission bearings will make sure that your transmission is working correctly. They are available for different models and gear positions inside of the manual transmission case. These high-quality manual transmission bearings are built within specific tolerances for fit and function. When your manual transmission bearings need to be replaced, look to Timken Bearing for help.
( 8 )
$9.99
BCA Bearings by NTN Tapered Roller Bearings
BCA Bearing by NTN tapered roller bearings are for light- and medium-duty applications. These bearings go through a case carburization process that creates bearings with a hard, wear-resistant outer shell and a tough ductile core. BCA Bearing by NTN bearings are precision-engineered from quality materials to provide optimal performance and durability. Tapered roller bearings feature: * Carburized surface layer (case carburization) on rings and rollers * Excellent shock resistant properties * 40 percent longer life compared to through hardened product offerings * High-capacity for radial, axial, and combined loads * Common applications: Transmissions, engines, differentials, wheel end, and transfer cases
Not Yet Reviewed
$6.50
—
$7.99
Clearance
FAG USA Wheel Bearing Seals
Prevent leaks and save money with FAG USA wheel bearing seals. These quality OE replacements offer a solid choice for dependable, long-lasting service and extended bearing life. The "gaskets" keep wheel bearing grease in—and dirt out. Economical bearing seals from FAG USA are a smart investment for wheel hub performance. Order the model designed to fit your vehicle application.
( 2 )
$10.99
$3.99
—
$7.99
Clearance
King SI-Series Rod Bearings
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 97 )
$10.99
—
$16.99
$7.50
—
$9.50
Clearance
National Bearing Axle Bearings
National Bearing axle bearings are premium bearings designed to meet or exceed OE specifications. These bearings are constructed from top-quality materials and are an ideal replacement option for your vehicle.
( 5 )
$15.99
$8.50
Clearance
FAG USA Tapered Roller Bearings
FAG USA offers tapered roller bearings for a wide range of applications. With advanced load-carrying capacity and compact design, this type of bearing is used in wheel bearings, transmissions, differentials, transfer cases, and other miscellaneous applications. FAG USA manufacturers more than 100-million tapered roller bearings annually, so you know you're getting high-quality replacements that can be trusted for fit and performance. Order the sizes needed for your use.
Not Yet Reviewed
$10.99
$8.50
