Availability
When quality is non-negotiable and space is at a premium SKF pilot bearings are the perfect solution. Available in a range of sizes and designs, they offer more rollers than a typical bearing to handle heavy loads. For more than 100 years the world's engineers, technicians, and mechanics have turned to SKF for the best possible solutions. Shouldn't you?
( 6 )
$2.99
—
$3.99
On Sale
That whining and grinding noise down near the clutch isn't going away—until you address the problem. When the pilot bearing on your vehicle is damaged or worn-out, replace it with a new unit from Crown Automotive. These bearings or bushings are designed and built to OEM specs for excellent fit and reliable performance. They're available in a variety of styles for fitment on specific vehicle applications. Silence the excess noise with Crown Automotive pilot bearings.
( 9 )
$3.99
—
$9.99
$3.59
—
$8.99
Keep your vehicle's transmission in peak performance with Dorman clutch pilot bushings and bearings. These factory-style replacements keep your tranny input shaft safely supported and in place when not engaged. Ignoring a worn-out pilot bearing can rob you of efficiency or even cause expensive damage. Order the type and size needed for your specific application.
( 28 )
$5.99
—
$6.99
These RAM Automotive pilot bushings eliminate the wear and tear that stock bushings put on your transmission input shaft. They offer longer life and better alignment, especially with high-output engines and sticky tires.
( 72 )
$5.00
—
$9.00
Clevite wrist pin bushings install into the connecting rod and allow for the use of floating pistons. They are manufactured from bronze and are available in different diameters for specific engines. Now you can convert to a set of bushed connecting rods and pick up the Clevite wrist pin bushings for full-floating connecting rods.
( 1 )
$2.50
—
$8.99
Replace your worn-out pilot bearings with quality replacements from OMIX-ADA. These steel bearings ensure proper alignment and reduce wear on your transmission. OMIX-ADA pilot bearings are direct replacements for the factory pieces, ensuring a proper fit.
Not Yet Reviewed
$4.99
Sealed Power pin bushings will meet tough demands for wear resistance when added to a set of full floating connecting rods. These bronze bushings will work to reduce engine friction and keep things running smoothly.
( 9 )
$7.99
—
$10.99
Kibblewhite Engine Builder Series wrist pin bushings will perform under the most demanding conditions. These special bushing are made from SAE660 bearing bronze to exact tolerances and will meet or exceed the fitment and wear ability of other replacement-style bushings available. They're offered individually or in pairs and are available in stock and in a +.002 in. oversize. Kibblewhite Engine Builder Series wrist pin bushings are wrist pins for Big Twins.
Not Yet Reviewed
$7.86
On Sale
Manley offers replacement pin bushings for your full floating rods. These bronze replacements will take the stress and reduce friction just like your originals.
Not Yet Reviewed
$10.36
$9.84
Timken clutch pilot bushings keep the transfer of power efficient. Leaders in friction management, Timken starts with high-quality materials and ends with precision-machined pilot bushings that will provide anti-friction alignment between your transmission and clutch. Timken puts you in motion with their well-made, cost-effective pilot bushings.
Not Yet Reviewed
$8.99
Timken clutch pilot bearings keep the transfer of power efficient! Leaders in friction management, Timken starts with high-quality steel and ends with precision-machined pilot bearings that will provide anti-friction alignment between your transmission and clutch. Timken puts you in motion and makes you good to go with their well-made, cost-effective pilot bearings.
( 30 )
$4.99
Keyser Manufacturing offers a choice of pilot bushings to fit your needs. From standard bronze bushings, extra-long bushings for applications where mid-plates increase the distance between the bellhousing and engine to standard pilot bushings with bearings to reduce parasitic drag and maintain alignment, Keyser has you covered.
( 5 )
$4.99
Replacing your clutch? Pioneer clutch pilot bushings will help you complete the task properly. Their broad selection of OEM replacement bushings are manufactured of 60 percent bronze and 40 percent cast iron to meet OE specifications for size and physical properties. Each bushing is oil-impregnated for long life (applicable models). Heavy-duty pilot bushings and bearings are recommended for performance applications. Pioneer performance pilot bushings are manufactured from 100 percent bronze material to reduce problems caused by heat build-up. Pioneer roller pilot bearings are direct replacements for OEM bronze bushings and use needle bearing sleeves to reduce friction and heat, providing quicker and smoother shifts. They may be small but they play a big role in maintaining your transmission and clutch operation. Guide your clutch to smooth shifts and efficient performance with Pioneer clutch pilot bushings.
( 14 )
$8.99
On Sale
Manley wrist pin bushings are made with premium AMPCO 18 materials—the ultimate in high-strength bronze, performing exceptionally well under heavy loads and impact conditions. Their toughness and resistance to distortion. Manley pin bushings will help ease the stress and reduce friction just like your originals.
Not Yet Reviewed
$10.36
$9.84
Clearance
For customized vehicles, Advance Adapters pilot bushings help adapt engines to transmissions. Most of them feature a special bronze Oilite material with pores that allow the oil to permeate throughout the bushing—keeping everything properly lubricated. Some of the many styles include: * Solid bronze bushings * Crankshaft bushing spacers * Bushing extenders
( 10 )
$19.99
$9.50
Replace your worn-out rubber bushings and provide greater suspension travel and performance with All Balls Racing ATV/UTV A-arm bearing and seal kits. These rebuild kits contain all of the bearings, seals, shafts, and miscellaneous components to repair A-arm bearing failure. They upgrade the rubber bushings found in ATV/UTV A-arms to the All Ball's redesigned HD Delrin bushings. All older bearing and seal designs are upgraded to the best and latest specs.
( 2 )
$10.38
On Sale
Are you installing a clutch? Centerforce pilot bearings and bushings will be needed for proper installation. The bushings and bearings are made of high quality materials, available for many applications, and are direct original equipment replacements. Upgrade your pilot bushings or replacing worn pilot bearings with Centerforce.
( 39 )
$12.95
$11.66
OEM LS rocker arms are prone to failure, which can result in needle bearings being dispersed through the engine. Smith Brothers suggests replacing the factory needle bearings with solid bronze trunnion bushings that promote even wear and disperse valve spring load evenly. This trunnion upgrade also allows for 360 degree rotation and eliminates the travel stops (which create problems with higher lift camshafts) in the original OE rocker design.
Not Yet Reviewed
$6.99
Clearance
These QA1 V Series rod ends are designed for excellent durability. They feature a carbon steel body with a protective coating for corrosion resistance and a heat-treated 52100 steel ball bearing that is precision-ground and hard chrome plated. The rod ends use a sintered bronze race and are oil-impregnated. The QA1 V Series rod ends use unique, 4-piece construction to provide high strength and reliability.
( 3 )
$15.99
$5.50
—
$9.99
Summit Racing™ replacement rocker arm trunnion bushings are the same components packaged in our LS engine retrofit trunnion kits and are offered to save you money. These replacement pairs allow you to purchase just what you need. And just like the originals, these rocker arm trunnion bushings feature C932 bearing bronze construction. Enjoy peace of mind when you use quality replacement parts from Summit Racing™.
( 1 )
$6.99
QA1 MV Series rod ends are bronze/carbon steel race rod ends appropriate for low-load, high-oscillation applications. These rod ends feature a protective coating for corrosion resistance, and are available with metric left or right hand threads. QA1 MV rod ends are designed with 52100 bearing steel balls that are precision-ground, heat-treated, and hard chrome plated. The races are sintered bronze and oil impregnated. The bodies are protective coated carbon steel.
Not Yet Reviewed
$9.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
