Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
153 Results Found For "air"
Showing In Stock Items. Show All 369 Items.
EMAX Industrial Plus Silent Air Piston Compressors
EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 16 )
$5,297.70
—
$8,147.20
RideTech 1955-57 Chevy Air Suspension Systems
RideTech 1955-57 Chevy air suspension systems enable you to achieve that ultra-low show stance while providing excellent ride quality and handling. They're available to fit a variety of Tri-Five models. Choose the air suspension system recommended for your year/make/model. Some kits may vary depending on your specific application. The RideTech 1955-57 Chevy air suspension systems feature: * Upper StrongArms (powdercoated black and fully assembled with ball joints, bushing and cross shafts, ready for installation) * Lower StrongArms (powdercoated black and fully assembled with ball joints, bushing and cross shafts, ready for installation) * HQ Series Shockwaves utilize an impact forged aluminum body and Monotube design to deliver excellent ride quality and handling * Front MuscleBar: helps reduce body roll and includes PosiLink end links that provide immediate engagement between the chassis and control arms * Bolt-on 4-link greatly improves traction, handling and ride quality (R-Joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing) Important note: Control system not included. To complete the air suspension system, a RideTech compressor system is required. Helpful note: To determine the difference between 1-piece and 2-piece frames on the 1955, 1956 and 1957 cars, look at the bottom of the main frame rail under the driver's door area. * The 1-piece frame cars the bottom of the frame will be flat and smooth, and is often called the "California" frame * The 2-piece frame design has a rough weld seam right down the bottom center of the frame rail front to rear
Not Yet Reviewed
$5,590.00
RideTech 1967-69 Camaro/Firebird HQ Air Suspension Systems
RideTech offers HQ air suspension systems for 1967-69 Camaro and Firebird (GM F-Body) applications. These Air Ride adjustable suspensions enable you to raise or lower your muscle car at the push of a button. The systems include front and rear HQ Series Shockwaves with adjustable rebound, plus upper and lower StrongArm front control arms, tall spindles, a bolt-on 4-link, and a front MuscleBar sway bar. Air Ride provides ultra-low show stance with modern ride quality and handling—and includes several components that will dramatically improve the suspension geometry to give your classic muscle car modern drivability. Systems are available with "pin" or "hub" spindles. Product features: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * OR … "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late-model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking, and reduced maintenance. (Hubs not included). Compatible with C5/C6 Corvette brake systems, OE, and aftermarket (caliper brackets included). Minimum 17 in. wheels. * The upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow for additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * The lower StrongArms feature a double sheer lower mount for increased strength. RideTech has also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series Shockwaves utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling. The rebound knob is at the top of the shock for easy underhood access. * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings. * The bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-joint rod ends, combining the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special street/strip bearing. Upgrades: * Early Camaro/Nova front-ends have very poor suspension geometry—the tires lean outward around turns, the bump steer is bad, and there's little room to run a wide wheel because of the OEM steering arm interference with the inside of the wheel. The TruTurn System resolves ALL these issues; the tires now lean INTO the turn, the bump steer is UNDER .050 in. through 5 in. of suspension travel, and you now have clearance to run up to a 10 in. wide wheel with a 275mm tire! Compatible with both the Ridetech "pin" and "hub" spindles. * The addition of the rear sway bar is for the true track car. Wide tires plus big horsepower typically means faster corner speeds. The MuscleBar sway bar helps keep those rear tires hooked up through the corner. * Compressor Sytems: RideTech offers its RidePro E5 air suspension control system as a pre-assembled, all-in-one module as the "AirPOD"; or you can purchase the RidePRO E5 system as a component kit to install how you like.
Not Yet Reviewed
$6,165.00
—
$6,315.00
RideTech 1968-74 Nova Air Suspension Systems
RideTech 1968-74 Nova air suspension systems provide the components to achieve an ultra-low stance, while improving the suspension geometry for added drivability. All you need to add to these kits is one of RideTech's compressor systems. RideTech 1968-74 Nova air suspension kits include: * RideTech tall spindles induce more negative camber gain to maximize tire contact patch during cornering * Upper and lower front StrongArms * HQ Series Shockaves utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling * Front MuscleBar helps reduce body roll, crates room for wider tires, and includes PosiLink endlinks * Bolt-on 4-link greatly improves traction, handling, and ride quality
Not Yet Reviewed
$6,065.00
RideTech 1973-79 Ford Air Suspension Systems
RideTech 1973-79 Ford air suspension systems enable you to achieve that ultra-low show stance while providing excellent ride quality and handling. The older classic Ford trucks were designed and built for a different era—back when the speed limit was 55 and trucks were meant to work hard. While the original twin I-beam front suspension was built "Ford tough" it wasn't exactly built to carve corners. So, RideTech set out to design the best handling classic Ford suspension for the 1973-79 Ford trucks—and build it in a package that you can install yourself with hand tools and a little elbow grease. These RideTech Ford air suspension packages feature matched components to upgrade the performance of your old Ford for ride quality and handling with adjustable vehicle height. Complete systems vary by application and use and may include tubular a-arms, 4-links, coilovers, Shockwaves, air springs, shock absorbers, coil springs, leaf springs, sway bars, bushings, ball joints and more. Choose the Ford air suspension system recommended for your year/make/model.
Not Yet Reviewed
$8,480.00
RideTech 1961-65 Falcon Air Suspension Systems
RideTech 1961-65 Falcon air suspension systems were built from the ground up to transform your old school Falcon into "new cool" for the 21st century. You will have the versatility to take your classic to the local cruise by yourself, load it down with friends, throw all your stuff in the trunk, or lay your Ford in the weeds and the air suspension will take care of leveling the car back out. The kits are offered with HQ or TQ Series ShockWaves. RideTech did the homework, got the geometry right, and matched the best components to deliver a strong bolt-on suspension system that will make your little Ford Falcon handle super tight and responsive, yet be compliant, quiet, and comfortable. RideTech 1961-65 Ford Falcon air suspension systems include: * Front and rear HQ or TQ Series ShockWaves * Front upper and lower StrongArm tubular control arms * TruTurn system * Front MuscleBar sway bar * Rear 4-link system
Not Yet Reviewed
$7,980.00
—
$10,325.00
RideTech 1967-69 Camaro/Firebird TQ Air Suspension Systems
RideTech 1967-69 Camaro/Firebird (GM F-Body) TQ air suspension systems provide ultra-low show stance with modern ride quality and handling. These packages include front and rear HQ Shockwaves, upper and lower StrongArms, tall spindles, bolt-on 4-link with double adjustable bars and front sway bar. Buying a complete suspension system removes all the guesswork! RideTech has spent hours collecting data to find the perfect spring rate and components for your vehicle's performance and ride quality. Tubular upper and lower StrongArms feature injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. Ball joint angles are corrected for the tall spindles and the positions altered to allow more caster while keeping the wheel centered in the wheel opening. The additional caster settings improve high-speed stability and steering feel. Offset slugs are also available for additional caster. The lower arms feature a double sheer lower mount that has been lowered for increased suspension travel. Additional details: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * Optional "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking and reduced maintenance. (Hubs not included.) Compatible with C5/C6 Corvette brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. * Lower StrongArms feature a double sheer lower mount for increased strength. We have also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * TQ Series Shockwaves feature triple adjustable shock valving and are housed in an impact forged aluminum construction
Not Yet Reviewed
$8,485.00
RideTech 1962-67 Chevy II/Nova TQ Series Air Suspension Systems
RideTech 1962-67 Chevy II/Nova TQ Series air suspension systems include everything you need to upgrade your existing suspension and give your classic Chevy an aggressive lowered stance with modern drivability. Buying a complete suspension system takes the guesswork out of choosing the correct components that will work together for optimal performance. RideTech has spent hours collecting data, finding a perfect spring rate and components for your vehicle's performance and ride quality. These RideTech 1962-67 Chevy II/Nova air systems feature their TQ Series Shockwaves. With a remote reservoir, these triple adjustable shocks provide rebound adjustment along with dual-stage (high-speed and low-speed) compression adjustment. High-speed adjustment allows tuning for impact harshness and low-speed adjustment allows tuning of cornering characteristics, perfect for use on the autocross, road course, and drag strip. Along with TQ Shockwaves, these RideTech systems contain a front TruTurn system with StrongArms, front MuscleBar, and bolt-on 4-link. Package contents and benefits: * Front upper and lower StrongArm tubular control arms with injection-molded Delrin bushings with 13 percent PTFE to reduce deflection and stiction * StrongArms can be adjusted from 3 degree positive caster to over 7 degree positive caster with the additional caster setting providing improved high-speed stability and steering feel * Bumpsteer reduced to .030 in. throughout 5 in. of suspension travel * Tall spindles induce more negative camber gain to maximize tire contact patch during cornering, and offers a 2 in. pin drop, allowing the use of longer shocks and increased suspension travel * Front MuscleBar sway bar reduces body roll and creates room for wider front tires * Rear 4-link greatly improves traction, handling, and ride quality, as well as suspension geometry with optimized roll center and adjustable anti-squat. * Four TQ Series Shockwaves
Not Yet Reviewed
$10,345.00
BendPak V-Max Elite Air Compressors
Unlock your shop's full potential with BendPak V-Max Elite air compressors. The extreme-duty 4-cylinder pumps are engineered to operate at maximum efficiency under all load conditions. The compressors have rugged 2-stage, 100 percent cast iron pumps that feature splash lubrication and a V-4 finned cylinder configuration. These enhancements result in total reliability and 360 degree cooling. Heavy-duty, disc-type valves are dependable and accessible without even having to remove the cylinder head or other needlessly complicated valve maintenance procedures. A built-in intercooler and air-cooled aftercooler chill the air, reducing both heat and moisture from condensation. The compressors run quiet due to significantly slower pump rpm speeds and energy-efficient pumps. Additional features of BendPak V-Max Elite air compressors: * Cast iron pump and heads * Dual belt drive for less load on bearings * Fully enclosed belt guard * ASME-rated tank * Large surface cooling fins * Oversized ductile iron crankshaft * Tapered roller main bearings * Precision-balanced flywheel * Magnetic starter * Cast iron oil reservoir with large oil drain and sight-gauge glass
Not Yet Reviewed
$5,195.00
—
$7,295.00
EMAX Energy-Efficient Rotary Screw Air Compressors
EMAX rotary screw compressors distribute the quietest, most dependable air technology with programmable control! Utilizing innovative product design, the highest quality components, and professional workmanship, EMAX compressors provide you with the features you want and the energy efficiency you need, backed by one of the best warranties in the industry. EMAX energy-efficient rotary-screw air compressor features: * State-of-the-art screw air ends have precision-aligned, back-to-back, tapped roller bearings with close tolerances to guarantee long life cycles and outstanding reliability * Each air end is tested to meet consistent high-quality standards * Premium industrial high-efficiency motors constructed with superior materials, higher service factors, longer bearing lives, lower waste-heat output, and less vibration * Drive-Tek design reduces energy demand up to 33 percent * Variable speed soft-start motors provide reduced energy demand and amp-draw on start-up * Spin-Tek design offers unique, easy access to oil filters and air/oil separators—requires no tools to remove/install, saving you time and money * Heavy-duty sound attenuated cabinet provides lower decibel operation than a typical rotary screw * Programmable logistic controller—user-friendly Logika PLC features variable speed control, adjustable pressure range, low oil shutdown, reverse fault, high-voltage fault, over-amp shutdown, hour meter, fault history, maintenance service schedule, air differential control, built-in timer, on-line demand, self-start, and master slave; plus clock and date settings, daily/weekly scheduling, and a built-in light.
Not Yet Reviewed
$9,902.40
—
$17,941.80
EMAX Energy-Efficient Direct-Drive Rotary Screw Air Compressors
Save that energy! When a motor starts at full load voltage it causes a voltage sag on the power system and can cause shock damage creating long-term damage to your motor. EMAX energy-efficient direct-drive rotary screw air compressors have variable frequency drives installed allowing a savings of 25 to 70 percent energy. EMAX energy-efficient direct-drive rotary screw air compressors are built to exacting standards, providing years of dependable service under demanding conditions. And because they use only high-quality OEM components, they offer a full 10-year warranty on the rotary screw pump and a 5-year warranty on the motor and all other components with the purchase of their oil and filters to ensure the correct oil with the specs needed is used for optimal operation. The heart of these compressors are the air ends—the part of the machine that actually compresses the air. EMAX uses only the best German and Finnish name brand air ends that are good for up to 70,000 running hours with only routine maintenance and the correct oil. Also, EMAX uses only premium, high-efficiency industrial motors to run the compressors delivering units with higher service factors, longer bearing lives, lower waste- heat output and less vibration. EMAX direct-drive rotary screw air compressors offer a lot of functionality, including a user-friendly Logika Programmable Logic Controller (PLC) that makes the units bulletproof, and allows easy, intuitive scheduling and operation of the compressor. Key features and benefits: * Ultra-quiet rotary screw operation -- Delivers enhanced reliability with ultimate energy efficiency -- Drive-Tek reduces energy demand up to 33 percent for huge savings -- Continuous 100 percent duty cycle operates at normal conversation level * Premium Industrial TEFC direct-drive motor -- Runs at 1,750 rpm for less wear and tear -- No belt maintenance and longer bearing life for worry-free performance * Variable speed soft start -- Reduces energy demand and amp draw on startup -- Creates less heat to increase compressors lifetime * Precision-engineered rotary air end -- Highly efficient design provides maximum discharge * Advanced Programmable Logistic Controller (PLC) -- Easy-to-use remote with timed start/stop and low oil shutdown -- Monitors maintenance, temperature, oil level, filtration, hours, and much more * Heavy-duty sound attenuated cabinet -- Offers lower decibel rating with easy access to critical components -- Designed for use with stationary air receiver (not included) -- Air receivers can be purchased separately to meet your specific needs * Spin-Tek -- Unique tool-less oil filters and air/oil separators -- Genuine Mann filters reduce air end contamination and harmful elements
Not Yet Reviewed
$45,403.30
—
$56,760.00
Campbell Hausfeld Two-Stage Air Compressors
Campbell Hausfeld two-stage air compressors are ideal for automotive repair in a shop environment. They are designed for the frequent use of automotive air tools. Their tanks are approved by ASME, the American Society of Mechanical Engineers, for 200 psi maximum pressure, which ensures safe operation.
( 1 )
$5,216.99
EMAX 3-in-1 Air Compressor with Welder and Generator
The EMAX 3-in-1 air compressor with welder and generator is ran by a 14 hp Kohler Command series engine and a 5 hp two-stage all cast iron pressure lubed pump. These units provide compressed air, three 120 V and 240 V power outlets and a DC 190 amp welder, which makes them ideal for any job site. You can use these 3-in-1 systems in commercial and industrial applications on a jobsite or on the go with the units solid pneumatic tires, or the tires can be removed to make the unit stationary. The two-stage all cast iron pressure lubed pump delivers high cfm output and reliability. The two ASME twin tanks provide 20 gallons of air storage with removable handles, quick disconnects, rubber isolator pads, and liquid filled gauges. The assembly also includes a heavy-duty steel belt guard to make these units ready for any task! In addition, the 3-in-1 compressor units are backed by an EMAX 5-year parts warranty.
Not Yet Reviewed
$6,073.40
Clearance
AccuAir Suspension Jeep Dynamic Lift Kit Systems
Find adventure with AccuAir Suspension's advanced and proven dynamic lift kit systems for Jeeps--complete kits that allow for total versatility when it comes to on and off-road fun. And, while air springs and air lift kits are not common on Jeep suspensions, these kits give you capabilities no other Jeep has. More than a lift to ride higher and more comfortably than factory spring and shock kits; with AccuAir dynamic lift kits you will have the option to raise and lower your Jeep at the push of a button. AccuAir dynamic lift kit systems lower to stock level for garage entry then automatically adjusts to 3.5 in. of lift. While off-roading under 25 mph the Jeep can be adjusted to 5.5 in. of lift. The underbody mounted air tank is regulated onboard air for inflating tires and tools. The system automatically adjusts to optimal ride height at speeds above 25 mph. These dynamic lift kits will auto level your vehicle, a must when towing, and overlanding enthusiasts can easily level their Jeep for overnight stops. The fully bolt-on system includes new lower control arms, sway bar links, and front track bar for increased strength and FMVSS 126 compliant handling. Each system includes JRi shocks and AccuAir e-Level Plus control system, which can be controlled via a hardwired Touchpad+ or by Bluetooth through the ePlus app. Choose the AccuAir dynamic lift kit packaged for your Jeep.
Not Yet Reviewed
$5,499.99
—
$7,499.99
Baileigh Industrial FE-1200 Heavy-Duty Portable Fume Extractors
Looking for a fume extractor that can really remove fumes at a high rate? Introducing the FE-1200 Heavy-Duty Portable Fume Extractor from Baileigh Industrial. Fume extractors are an important part of any welding shop. They help keep the areas clean and the air the workers breathe safe. The FE-1200 is a mobile unit that has many of the features that most shops are looking for. Additional details: * Includes 8 in. x 10 ft. extractor arm * 1.5 hp * 1,110 cfm * 110 V * 3 stage filter: Aluminum mesh; Fire-resistant cartridge filter; HEPA filter * Air pulse cleaning: When flow is restricted, simply shut the machine off, and press the air pulse button (requires 60-90 psi air connection). An internal air tank automatically backflushes the cartridge filter, knocking off accumulated dust and debris (the debris falls into a removable pan for easy cleanout). The extractor can now be turned on and work resumed. * Full steel construction * CSA – U.S. certified * Tool-less filter maintenance
Not Yet Reviewed
$9,576.99
EMAX Industrial Plus Gas-Powered Piston Compressors
EMAX Industrial Plus gas-powered piston compressors deliver overwhelming performance to meet the needs of the most demanding environments. Their pumps require less maintenance, service, and downtime—and all EMAX gas-powered compressors furnish the power needed at the jobsite, garage, or shop. These units have ASME-approved air receivers and custom-built engine stands that brace the platform of the tank, allow easy belt tightening, and significantly reduce vibration. Many competitors' pumps run at double the rpm of EMAX pumps because they are much smaller and must run fast to produce enough air. EMAX Industrial Plus pumps have solid cast iron cylinders, cylinder heads, crankcases, flywheels, crankshafts, and rebuildable, forged steel connecting rods. They have large roller bearings on the crankshaft ends for stability and long bearing life. Disc intake and exhaust valves are sealed by O-rings and can be removed without disturbing the head gaskets. When it came to engines, the obvious choice for EMAX was the Honda GX Series with electric starters. Their OHV design provides excellent torque and fuel efficiency, quiet operation, and they're easy-to-use. Built for efficient airflow, effective cooling, and durability, with a slant cylinder design for smooth running—they feature mufflers with spark arresters, hydraulic valve lifters, low oil shutdown, automatic compression releases for easy starting, key switches, and battery chargers. EMAX's Honda GX engines also have engine idle-down (when the compressor is in free-wheel mode) and, with electronic ignition, excellent cold weather starting ability. Additional features of EMAX Industrial Plus gas-powered piston compressors include: * 1/4 in. ball valve drain at the front of the tank for easy access * Quality tank gauge; all safety valves and pop-offs are ASME-approved * 3/4 in. ball valve air outlet * Custom-built, heavy-duty 13-gauge expanded metal belt guard * 35 percent lower operating temperatures—reduces moisture buildup and extends pump life * Air-Stream technology provides up to 50 percent longer pump life * Intercooler and aftercooler lines to cool the air between stages and after the 2nd stage (where applicable) * Raised platforms pull air under the pumps * "V" or "W" pump shapes help eliminate hotspots and provide consistent cooling * Site glass to view oil level * Twin belts offer better belt grip and longer belt life * Head unloaders allow for load-less starting and help cool the pump in high-duty cycle applications * Pre-tested before they leave the factory * Just add a 12 V battery and battery cables and they're ready to go
Not Yet Reviewed
$7,659.60
—
$7,996.80
RideTech 1967-69 Camaro/Firebird HQ Coil-Over Systems
RideTech 1967-69 Camaro / Firebird HQ coilover systems include everything you need to upgrade your existing suspension and give your muscle car an aggressive lowered stance with modern drivability. The packages contain front upper and lower control arms, tall spindles, a front sway bar, a rear 4-link, and four HQ Series coilovers for every corner of your vehicle. Buying a complete suspension system removes all the guesswork. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality. Product features: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. They also offer a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * Optional "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking and reduced maintenance. (Hubs not included.) Compatible with C5/C6 Corvette brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. * Lower StrongArms feature a double sheer lower mount for increased strength. RideTech has also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * HQ Series coilovers utilize an impact-forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling via the rebound adjustment knob, located at the top of the shock, for under-the-hood access. They come standard with a 1,000,0001 Mile Warranty. * Front sway bar reduces body roll and creates room for wider front tires. Includes billet aluminum frame straps (anodized black) and low friction bushings. * Bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special street/strip bearing. Upgrades: * TruTurn System: The early Camaro/Nova front-ends have very poor suspension geometry; the tires lean outward around turns, the bump steer is terrible, and there's little room to run a wide wheel because of the OEM steering arm interference with the inside of the wheel. The Tru Turn system resolves ALL these issues; the tires now lean INTO the turn, the bump steer is UNDER .050 in. through 5 in. of suspension travel, and you now have clearance to run up to a 10 in. wide wheel with a 275mm tire! Compatible with both the Ridetech "pin" and "hub" spindles. * Rear sway bar: The addition of the rear sway bar is for the true track car. Wide tires plus big horsepower typically mean faster corner speeds. The MuscleBar sway bar helps keep those rear tires hooked up through the corner. * Weld-on lower axle brackets are available for aftermarket axle housing without stock-style leaf spring pads. Part number 70010122 is sold separately.
Not Yet Reviewed
$6,125.00
RideTech 1967-69 Camaro/Firebird TQ Coil-Over Systems
RideTech 1967-69 Camaro / Firebird (GM F-Body) TQ coilover systems include everything you need to upgrade your existing suspension and give your muscle car an aggressive lowered stance with modern drivability. Each package contains front and rear HQ coilovers, front upper and lower StrongArms, tall spindles, bolt-on 4-link with double adjustable bars and front sway bar. Buying a complete suspension system removes all the guesswork. RideTech has spent hours collecting data to find the perfect spring rate and components for your vehicle's performance and ride quality. Tubular upper and lower StrongArms feature injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. Ball joint angles are corrected for the tall spindles and the positions altered to allow more caster while keeping the wheel centered in the wheel opening. The additional caster settings improve high-speed stability and steering feel. The lower arms feature a double sheer lower mount that's been lowered for increased suspension travel. Additional details: * Tall "pin" spindles will induce more negative camber gain to maximize tire contact patch during cornering. It also offers a 2 in. drop—which allows for the use of longer shocks, creating more suspension travel. Compatible with all brake kits designed to fit the stock disc brake spindle. * Optional "hub" spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late model Corvette hubs and brakes. Uses C5/C6/C7 Corvette hubs for maximum strength, consistent braking and reduced maintenance. (Hubs not included.) Compatible with C5/C6 Corvette brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joints have been moved back to allow additional caster settings to improve high-speed stability and steering feel. Offset slugs are also available for additional caster. Injection-molded Delrin© bushings with 13 percent PTFE reduce deflection and stiction. * Lower StrongArms feature a double sheer lower mount for increased strength. We have also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection-molded Delrin© bushings with 13 percent PTFE are used to reduce deflection and stiction. * TQ "Track Quality" Series coilovers offer competition-grade handling with dual compression adjustment and rebound adjustment for precise tuning. Remote reservoirs provide consistent fluid temps in all environments, as well as easier access to compression tuning knobs.
Not Yet Reviewed
$8,115.00
OTC Air/Hydraulic Powertrain Lifts
The OTC air/hydraulic powertrain lifts are built to handle heavy engine and transmission assemblies, gas tanks, drive axle assemblies, electric vehicle batteries, and more! By facilitating easier and safer handling of powertrain components, these air-hydraulic powertrain lifts can contribute to faster, more efficient repairs, potentially saving time and labor costs. Key features and benefits: * Offers several benefits for automotive and other repair applications—designed for safely lifting and maneuvering heavy components like engines, transmissions, fuel tanks, and electric vehicle batteries * Scissors-type design allows access to all four sides of a component * Powered by an air over hydraulic foot pump for precise lifting and lowering control * Independent adjusting screws tilt the table 15 degree side-to-side, or fore-and-aft, and ensure maximum stability of the table in any position * Large, 8 in. swivel casters accommodate heavy loads * Meets ASME PASE standards
Not Yet Reviewed
$7,605.99
OTC 10-Ton Air Lifts
OTC's 10-ton air lifts are designed to provide powerful and efficient lifting solutions for heavy vehicles and equipment. They are typically used in automotive and industrial settings for tasks like vehicle maintenance, repair, and tire changes. The air-powered operation reduces the physical effort required for lifting, and the sturdy construction ensures safety and durability for demanding jobs. Whether it's a specialty tool or unique piece of service equipment, OTC provides top solutions to automotive service challenges while increasing technicians' productivity and shop profits. Value is at the core of the OTC tool and equipment portfolio. Key features and benefits: * The OTC 10-ton air lifts are particularly useful for vocational vehicles, bucket trucks, school buses, and other large vehicles, as well as for highway maintenance and service fleets * The robust construction, including features like adjustable lifting saddles and a wide stance for stability, ensure safer lifting operations * Designed to withstand the rigors of heavy-duty use, these lifts are built to last and provide reliable service for extended periods * Air-powered operation allows for quick and effortless lifting, saving time and effort compared to manual jacks * Air lift provides 10-tons of lift at 200 psi air pressure * Adjustable lifting saddles and an extra wide stance for extra stability * Lifting range is 13-inches up to 52 inches * Automatic mechanical safety catch engages in five height positions
Not Yet Reviewed
$6,394.99
Baileigh Industrial SH-5216A Air Powered Metal Shears
Built of fully integrated and welded all-steel plate, Baileigh Industrial SH-5216A air powered metal shears can provide years of service. These air powered sheet metal shears are designed to cut 16-gauge mild steel or lighter, making them a great choice for pro and school workshops alike. Baileigh Industrial SH-5216A air powered metal shears feature: * Cuts up to 52 in. wide sheet metal * Requires only compressed air between 90 and 115 psi (no electrical power needed) * Regulator lets you control the airflow * Can cut at 20 strokes per minute for high production * High-chromium carbon blades have multiple cutting surfaces for extended life between re-sharpening * Oilers make maintenance easy and allow you to keep the machine running smoothly with less friction * Working table offers integrated squaring stops with scale * Includes front and back material supports as well as side guide * Manual rack and pinion back gauge with quick lock and measuring scale help you easily make repeatable cuts * Covered by a 1-year parts manufacturer warranty * Baileigh keeps replacement blades and other parts in stock at their Wisconsin headquarters for fast shipping * Baileigh offers lifetime technical support by phone from their in-house team of knowledgeable representatives
Not Yet Reviewed
$8,986.00
Magnuson Magnum TVS2650R Supercharger Kits
Take your Z06 to the next level with Magnuson's TVS2650 Magnum Supercharger System! Built off of Magnuson's premium Magnum Performance Line, their Corvette Magnum System will give your engine an incredible 76 extra horsepower: 726 hp and 690 ft-lbs at the crank! The system has been designed to fit under the hood of a stock C7 Z06, all while featuring two massive charge air coolers for maximum cooling capability. At Magnuson, they only use the highest quality components in their supercharger kits. Everything you need to supercharge your Corvette is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnum Supercharger on your Corvette!
( 1 )
$7,595.00
Magnuson Magnum TVS2650 Supercharger Kits
Magnuson TVS2650 supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. The TVS2650 system was developed to be a direct bolt on kit with minimal downtime, and straightforward installation. An enthusiast with basic tools can install the system in a weekend, or about a day for an experienced installer. The supercharger itself is maintenance free- pre-filled and sealed, nothing to check or top off for the lifetime of the engine. Magnuson only uses the highest quality components in their supercharger kits. Everything you need to supercharger your application is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnuson Supercharger!
( 1 )
$7,395.00
—
$8,995.00
Ford Performance Parts F-150 Supercharger Kits
These Ford Performance Parts F-150 supercharger kits are designed to put approximately 160 hp and 160 ft.-lbs. of torque at the rear wheel. They feature an intercooled design, use the factory throttle body, and include a 95mm mass air meter. Ford Performance Parts F-150 supercharger kits include a Pro-Cal voucher to get your computer custom-calibrated.
( 1 )
$9,619.99
